Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Adaptec 2940 not recognized by 2.4-11 Kernel
0 views
Skip to first unread message
Dirk Engelmann
Dec 9, 2000, 6:28:38 PM12/9/00
to
Hello,
I just compiled the kernel 2.4-test-11.
Everything seems to work fine, but the SCSI controller (that worked well
with the standard installed RedHat 7.0 system kernel 2.2-16)
isn't recognized anymore.
A plextor CD-ROM and a HP 1537A DAT- Drive are connected to the
adapter(this shouldn't matter too much).
I haven't found an exact match to the installed ADAPTEC 2940 A PCI
Controller in the kernel config options, the closest one was an 1740
controller.
Which option should I enable prior to recompiling the kernel?
lspci shows:(among others, of course)
I just compiled the kernel 2.4-test-11.
Everything seems to work fine, but the SCSI controller (that worked well
with the standard installed RedHat 7.0 system kernel 2.2-16)
isn't recognized anymore.
A plextor CD-ROM and a HP 1537A DAT- Drive are connected to the
adapter(this shouldn't matter too much).
I haven't found an exact match to the installed ADAPTEC 2940 A PCI
Controller in the kernel config options, the closest one was an 1740
controller.
Which option should I enable prior to recompiling the kernel?
lspci shows:(among others, of course)
00:0c.0 SCSI storage controller: Adaptec AIC-7881U
Any help would be appreciated.
Dirk
0 new messages