TP Link TL-WN722N adapter & ath9k-htc driver.

[pe...@easthope.ca]

Hi,

An old Sharp Mebius here has 32 bit bullseye.

When booting, this message appears.
ath9k_htc: Device endpoint numbers are not the expected ones

In a console, these.

$ lsusb
Bus 001 Device 002: ID 0cf3:9271 Qualcomm Atheros Communications AR9271 802.11n
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

$ ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group debault qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp0s18: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether 00:40:d0:1b:01:6a brd ff:ff:ff:ff:ff:ff

$ lsmod | grep ath9k
ath9k_htc 61440 0
ath9k_common 16384 1 ath9k_htc
ath9k_hw 421888 2 ath9k_htc,ath9k_common

Can anyone explain "Device endpoint numbers are not the expected ones"?
Other ideas?

Thanks, ... P.

-
mobile: +1 778 951 5147
VoIP: +1 604 670 0140

[Charles Curley]

On 15 Jun 2023 07:43:01 -0700

pe...@easthope.ca wrote:

> An old Sharp Mebius here has 32 bit bullseye.
>
> When booting, this message appears.
> ath9k_htc: Device endpoint numbers are not the expected ones

Did you try searching on that exact language? That often produces
useful results.

https://duckduckgo.com/?q=ath9k_htc%3A+Device+endpoint+numbers+are+not+the+expected+ones

--
Does anybody read signatures any more?

https://charlescurley.com
https://charlescurley.com/blog/