Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Bug#763320: linux-image-3.16-2-amd64: intel_idle enabled for Intel Atom S1260, causes high CPU temperature when idle
41 views
Skip to first unread message
Christophe Thil
Sep 29, 2014, 6:10:01 AM9/29/14
to
Package: src:linux
Version: 3.16.3-2
Severity: normal
Dear Maintainer,
with Kernel 3.16, intel_idle is enabled for the Intel Atom S1260 CPU
(Centerton SoC). This leads to a +20°C temperature increase when the CPU
is idle, exceeding the 100°C alarm threshold for passive cooled systems
like the Supermicro X9SBAA-F.
With 3.14, intel_idle was blacklisted for this CPU, which runs fine. If
3.16 is booted with intel_idle.max_cstate=0 processor.max_cstate=0,
which disables the intel_idle, the CPU also stays cool.
-- Package-specific info:
** Version:
Linux version 3.16-2-amd64 (debian...@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16-2-amd64 root=UUID=7b7b22dd-1baa-4772-a734-03ffc40db914 ro quiet console=ttyS1,115200n8 console=tty0 intel_idle.max_cstate=0 processor.max_cstate=0
** Not tainted
** Kernel log:
[ 2.983325] ata8.00: configured for UDMA/66
[ 2.983820] ata3.00: ATA-8: ST2000DL003-9VT166, CC3C, max UDMA/133
[ 2.983825] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.984577] ata3.00: configured for UDMA/133
[ 3.011761] usb 1-4: New USB device found, idVendor=0557, idProduct=2221
[ 3.011767] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.011771] usb 1-4: Product: Hermon USB hidmouse Device
[ 3.011776] usb 1-4: Manufacturer: Winbond Electronics Corp
[ 3.012035] usb 1-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.012046] usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.019168] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.030160] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.030313] ata1.00: ATA-7: MARVELL Raid VD, MV.R00-0, max UDMA7
[ 3.030321] ata1.00: 3906865280 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.030471] ata1.00: configured for UDMA/133
[ 3.030722] scsi 0:0:0:0: Direct-Access ATA MARVELL Raid VD 00-0 PQ: 0 ANSI: 5
[ 3.031345] usbcore: registered new interface driver usbhid
[ 3.031351] usbhid: USB HID core driver
[ 3.031737] scsi 2:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC3C PQ: 0 ANSI: 5
[ 3.032928] scsi 7:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5
[ 3.033670] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:02.0/0000:02:00.0/usb1/1-4/1-4:1.0/0003:0557:2221.0001/input/input0
[ 3.033959] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:02:00.0-4/input0
[ 3.034460] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:02.0/0000:02:00.0/usb1/1-4/1-4:1.1/0003:0557:2221.0002/input/input1
[ 3.034625] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:02:00.0-4/input1
[ 3.046153] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 3.053518] ata8.00: irq_stat 0x40000001
[ 3.057990] scsi 7:0:0:0: CDB:
[ 3.057994] Inquiry: 12 01 00 00 ff 00
[ 3.058012] ata8.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 3 dma 16640 in
[ 3.058012] res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
[ 3.075126] ata8: hard resetting link
[ 3.401934] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.402158] ata8.00: configured for UDMA/66
[ 3.402241] ata8: EH complete
[ 3.410424] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.410654] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.410830] scsi 7:0:0:0: Attached scsi generic sg2 type 3
[ 3.415232] sd 0:0:0:0: [sda] 3906865280 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.415438] sd 0:0:0:0: [sda] Write Protect is off
[ 3.415446] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.415527] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.415633] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.415642] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 3.415805] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.415813] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.415884] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.460487] sdb: sdb1 sdb2
[ 3.461418] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 3.478857] sda: sda1 sda2
[ 3.479827] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.726640] PM: Starting manual resume from disk
[ 3.726652] PM: Hibernation image partition 8:17 present
[ 3.726655] PM: Looking for hibernation image.
[ 3.727413] PM: Image not found (code -22)
[ 3.727417] PM: Hibernation image not present or could not be loaded.
[ 3.838801] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.548055] random: nonblocking pool is initialized
[ 6.069726] systemd-udevd[348]: starting version 208
[ 6.604812] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.621429] ACPI: processor limited to max C-state 0
[ 6.626403] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 6.626417] ACPI: Power Button [PWRB]
[ 6.715825] ipmi message handler version 39.2
[ 6.870470] ismt_smbus 0000:00:13.0: enabling device (0140 -> 0142)
[ 6.870874] ismt_smbus 0000:00:13.0: irq 68 for MSI/MSI-X
[ 6.871180] ismt_smbus 0000:00:13.1: enabling device (0140 -> 0142)
[ 6.871507] ismt_smbus 0000:00:13.1: irq 69 for MSI/MSI-X
[ 6.873234] IPMI System Interface driver.
[ 6.873371] ipmi_si: probing via ACPI
[ 6.873452] ipmi_si 00:06: [io 0x0ca2] regsize 1 spacing 1 irq 0
[ 6.873459] ipmi_si: Adding ACPI-specified kcs state machine
[ 6.873520] ipmi_si: probing via SMBIOS
[ 6.873527] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 6.873530] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
[ 6.873538] ipmi_si: probing via SPMI
[ 6.873543] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
[ 6.873546] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
[ 6.873554] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 6.912088] EFI Variables Facility v0.08 2004-May-17
[ 7.017131] ipmi_si 00:06: Found new BMC (man_id: 0x002a7c, prod_id: 0x0651, dev_id: 0x20)
[ 7.017168] ipmi_si 00:06: IPMI kcs interface initialized
[ 7.079210] kvm: disabled by bios
[ 7.113730] kvm: disabled by bios
[ 7.207631] [drm] Initialized drm 1.1.0 20060810
[ 38.813195] Adding 8388604k swap on /dev/sdb1. Priority:-1 extents:1 across:8388604k FS
[ 38.882522] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 39.249950] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 40.279552] ipmi device interface
[ 40.346725] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[ 40.347523] IPMI poweroff: ATCA Detect mfg 0x2A7C prod 0x651
[ 40.347529] IPMI poweroff: Found a chassis style poweroff function
[ 40.417866] IPMI Watchdog: Unable to register misc device
[ 40.424022] IPMI Watchdog: set timeout error: -22
[ 40.424033] IPMI Watchdog: driver initialized
[ 40.655854] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 40.758328] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 42.304336] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 45.678974] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 45.679142] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 66.125526] perf interrupt took too long (2517 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
** Model information
sys_vendor: Supermicro
product_name: X9SBAA
product_version: 0123456789
chassis_vendor: Supermicro
chassis_version: 0123456789
bios_vendor: American Megatrends Inc.
bios_version: 1.1
board_vendor: Supermicro
board_name: X9SBAA
board_version: 0123456789
** Loaded modules:
msr
cpufreq_userspace
cpufreq_stats
cpufreq_conservative
cpufreq_powersave
nls_utf8
nls_cp437
vfat
fat
ipmi_watchdog
ipmi_poweroff
ipmi_devintf
ttm
drm_kms_helper
i2c_isch
drm
efi_pstore
coretemp
ie6xx_wdt
evdev
lpc_sch
kvm
mfd_core
efivars
ipmi_si
tpm_tis
i2c_ismt
ipmi_msghandler
tpm
acpi_cpufreq
button
processor
shpchp
ext4
crc16
mbcache
jbd2
sd_mod
crc_t10dif
crct10dif_generic
sg
crct10dif_common
hid_generic
usbhid
hid
ahci
libahci
xhci_hcd
igb
i2c_algo_bit
i2c_core
dca
ptp
pps_core
libata
usbcore
usb_common
scsi_mod
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor S1200 Internal [8086:0c75] (rev 02)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 PCI bridge [0604]: Intel Corporation Atom Processor S1200 PCI Express Root Port 1 [8086:0c46] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fe460000 (64-bit, non-prefetchable) [size=128K]
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe300000-fe3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 PCI bridge [0604]: Intel Corporation Atom Processor S1200 PCI Express Root Port 2 [8086:0c47] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fe440000 (64-bit, non-prefetchable) [size=128K]
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fe200000-fe2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation Atom Processor S1200 PCI Express Root Port 3 [8086:0c48] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fe420000 (64-bit, non-prefetchable) [size=128K]
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
Memory behind bridge: fd800000-fe0fffff
Prefetchable memory behind bridge: 00000000fc000000-00000000fcffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Intel Corporation Atom Processor S1200 PCI Express Root Port 4 [8086:0c49] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=128K]
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe100000-fe1fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0e.0 IOMMU [0806]: Intel Corporation Atom Processor S1200 Internal [8086:0c54] (rev 02)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 5
Capabilities: <access denied>
00:13.0 System peripheral [0880]: Intel Corporation Atom Processor S1200 SMBus 2.0 Controller 0 [8086:0c59] (rev 02)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 68
Region 0: Memory at fe482000 (64-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ismt_smbus
00:13.1 System peripheral [0880]: Intel Corporation Atom Processor S1200 SMBus 2.0 Controller 1 [8086:0c5a] (rev 02)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 69
Region 0: Memory at fe481000 (64-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ismt_smbus
00:14.0 Serial controller [0700]: Intel Corporation Atom Processor S1200 UART [8086:0c5f] (rev 02) (prog-if 02 [16550])
Subsystem: Super Micro Computer Inc Device [15d9:0651]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at f000 [size=8]
Region 1: Memory at fe480000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: serial
00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor S1200 Integrated Legacy Bus [8086:0c60] (rev 02)
Subsystem: Super Micro Computer Inc Device [15d9:0651]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: lpc_sch
01:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller [1b4b:9230] (rev 10) (prog-if 01 [AHCI 1.0])
Subsystem: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller [1b4b:9230]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 53
Region 0: I/O ports at e050 [size=8]
Region 1: I/O ports at e040 [size=4]
Region 2: I/O ports at e030 [size=8]
Region 3: I/O ports at e020 [size=4]
Region 4: I/O ports at e000 [size=32]
Region 5: Memory at fe310000 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at fe300000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
02:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller [1912:0014] (rev 03) (prog-if 30 [XHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe200000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
03:00.0 PCI bridge [0604]: Tundra Semiconductor Corp. Device [10e3:8113] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=03, secondary=04, subordinate=04, sec-latency=64
Memory behind bridge: fd800000-fe0fffff
Prefetchable memory behind bridge: 00000000fc000000-00000000fcffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
04:03.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 [102b:0532] (rev 0a) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at fe000000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at fd800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
05:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)
Subsystem: Super Micro Computer Inc Device [15d9:1521]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe120000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d020 [size=32]
Region 3: Memory at fe144000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
05:00.1 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)
Subsystem: Super Micro Computer Inc Device [15d9:1521]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d000 [size=32]
Region 3: Memory at fe140000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 0557:2221 ATEN International Co., Ltd Winbond Hermon
Bus 001 Device 002: ID 04fa:2490 Dallas Semiconductor DS1490F 2-in-1 Fob, 1-Wire adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16-2-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16-2-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-2-amd64/prerm/removing-running-kernel-3.16-2-amd64: true
linux-image-3.16-2-amd64/postinst/depmod-error-initrd-3.16-2-amd64: false
linux-image-3.16-2-amd64/postinst/mips-initrd-3.16-2-amd64:
--
To UNSUBSCRIBE, email to debian-bugs-...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listm...@lists.debian.org
Version: 3.16.3-2
Severity: normal
Dear Maintainer,
with Kernel 3.16, intel_idle is enabled for the Intel Atom S1260 CPU
(Centerton SoC). This leads to a +20°C temperature increase when the CPU
is idle, exceeding the 100°C alarm threshold for passive cooled systems
like the Supermicro X9SBAA-F.
With 3.14, intel_idle was blacklisted for this CPU, which runs fine. If
3.16 is booted with intel_idle.max_cstate=0 processor.max_cstate=0,
which disables the intel_idle, the CPU also stays cool.
-- Package-specific info:
** Version:
Linux version 3.16-2-amd64 (debian...@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16-2-amd64 root=UUID=7b7b22dd-1baa-4772-a734-03ffc40db914 ro quiet console=ttyS1,115200n8 console=tty0 intel_idle.max_cstate=0 processor.max_cstate=0
** Not tainted
** Kernel log:
[ 2.983325] ata8.00: configured for UDMA/66
[ 2.983820] ata3.00: ATA-8: ST2000DL003-9VT166, CC3C, max UDMA/133
[ 2.983825] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.984577] ata3.00: configured for UDMA/133
[ 3.011761] usb 1-4: New USB device found, idVendor=0557, idProduct=2221
[ 3.011767] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.011771] usb 1-4: Product: Hermon USB hidmouse Device
[ 3.011776] usb 1-4: Manufacturer: Winbond Electronics Corp
[ 3.012035] usb 1-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.012046] usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.019168] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.030160] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.030313] ata1.00: ATA-7: MARVELL Raid VD, MV.R00-0, max UDMA7
[ 3.030321] ata1.00: 3906865280 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.030471] ata1.00: configured for UDMA/133
[ 3.030722] scsi 0:0:0:0: Direct-Access ATA MARVELL Raid VD 00-0 PQ: 0 ANSI: 5
[ 3.031345] usbcore: registered new interface driver usbhid
[ 3.031351] usbhid: USB HID core driver
[ 3.031737] scsi 2:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC3C PQ: 0 ANSI: 5
[ 3.032928] scsi 7:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5
[ 3.033670] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:02.0/0000:02:00.0/usb1/1-4/1-4:1.0/0003:0557:2221.0001/input/input0
[ 3.033959] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:02:00.0-4/input0
[ 3.034460] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:02.0/0000:02:00.0/usb1/1-4/1-4:1.1/0003:0557:2221.0002/input/input1
[ 3.034625] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:02:00.0-4/input1
[ 3.046153] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 3.053518] ata8.00: irq_stat 0x40000001
[ 3.057990] scsi 7:0:0:0: CDB:
[ 3.057994] Inquiry: 12 01 00 00 ff 00
[ 3.058012] ata8.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 3 dma 16640 in
[ 3.058012] res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
[ 3.075126] ata8: hard resetting link
[ 3.401934] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.402158] ata8.00: configured for UDMA/66
[ 3.402241] ata8: EH complete
[ 3.410424] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.410654] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.410830] scsi 7:0:0:0: Attached scsi generic sg2 type 3
[ 3.415232] sd 0:0:0:0: [sda] 3906865280 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.415438] sd 0:0:0:0: [sda] Write Protect is off
[ 3.415446] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.415527] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.415633] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.415642] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 3.415805] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.415813] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.415884] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.460487] sdb: sdb1 sdb2
[ 3.461418] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 3.478857] sda: sda1 sda2
[ 3.479827] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.726640] PM: Starting manual resume from disk
[ 3.726652] PM: Hibernation image partition 8:17 present
[ 3.726655] PM: Looking for hibernation image.
[ 3.727413] PM: Image not found (code -22)
[ 3.727417] PM: Hibernation image not present or could not be loaded.
[ 3.838801] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.548055] random: nonblocking pool is initialized
[ 6.069726] systemd-udevd[348]: starting version 208
[ 6.604812] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.621429] ACPI: processor limited to max C-state 0
[ 6.626403] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 6.626417] ACPI: Power Button [PWRB]
[ 6.715825] ipmi message handler version 39.2
[ 6.870470] ismt_smbus 0000:00:13.0: enabling device (0140 -> 0142)
[ 6.870874] ismt_smbus 0000:00:13.0: irq 68 for MSI/MSI-X
[ 6.871180] ismt_smbus 0000:00:13.1: enabling device (0140 -> 0142)
[ 6.871507] ismt_smbus 0000:00:13.1: irq 69 for MSI/MSI-X
[ 6.873234] IPMI System Interface driver.
[ 6.873371] ipmi_si: probing via ACPI
[ 6.873452] ipmi_si 00:06: [io 0x0ca2] regsize 1 spacing 1 irq 0
[ 6.873459] ipmi_si: Adding ACPI-specified kcs state machine
[ 6.873520] ipmi_si: probing via SMBIOS
[ 6.873527] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 6.873530] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
[ 6.873538] ipmi_si: probing via SPMI
[ 6.873543] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
[ 6.873546] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
[ 6.873554] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 6.912088] EFI Variables Facility v0.08 2004-May-17
[ 7.017131] ipmi_si 00:06: Found new BMC (man_id: 0x002a7c, prod_id: 0x0651, dev_id: 0x20)
[ 7.017168] ipmi_si 00:06: IPMI kcs interface initialized
[ 7.079210] kvm: disabled by bios
[ 7.113730] kvm: disabled by bios
[ 7.207631] [drm] Initialized drm 1.1.0 20060810
[ 38.813195] Adding 8388604k swap on /dev/sdb1. Priority:-1 extents:1 across:8388604k FS
[ 38.882522] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 39.249950] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 40.279552] ipmi device interface
[ 40.346725] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[ 40.347523] IPMI poweroff: ATCA Detect mfg 0x2A7C prod 0x651
[ 40.347529] IPMI poweroff: Found a chassis style poweroff function
[ 40.417866] IPMI Watchdog: Unable to register misc device
[ 40.424022] IPMI Watchdog: set timeout error: -22
[ 40.424033] IPMI Watchdog: driver initialized
[ 40.655854] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 40.758328] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 42.304336] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 45.678974] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 45.679142] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 66.125526] perf interrupt took too long (2517 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
** Model information
sys_vendor: Supermicro
product_name: X9SBAA
product_version: 0123456789
chassis_vendor: Supermicro
chassis_version: 0123456789
bios_vendor: American Megatrends Inc.
bios_version: 1.1
board_vendor: Supermicro
board_name: X9SBAA
board_version: 0123456789
** Loaded modules:
msr
cpufreq_userspace
cpufreq_stats
cpufreq_conservative
cpufreq_powersave
nls_utf8
nls_cp437
vfat
fat
ipmi_watchdog
ipmi_poweroff
ipmi_devintf
ttm
drm_kms_helper
i2c_isch
drm
efi_pstore
coretemp
ie6xx_wdt
evdev
lpc_sch
kvm
mfd_core
efivars
ipmi_si
tpm_tis
i2c_ismt
ipmi_msghandler
tpm
acpi_cpufreq
button
processor
shpchp
ext4
crc16
mbcache
jbd2
sd_mod
crc_t10dif
crct10dif_generic
sg
crct10dif_common
hid_generic
usbhid
hid
ahci
libahci
xhci_hcd
igb
i2c_algo_bit
i2c_core
dca
ptp
pps_core
libata
usbcore
usb_common
scsi_mod
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor S1200 Internal [8086:0c75] (rev 02)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 PCI bridge [0604]: Intel Corporation Atom Processor S1200 PCI Express Root Port 1 [8086:0c46] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fe460000 (64-bit, non-prefetchable) [size=128K]
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe300000-fe3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 PCI bridge [0604]: Intel Corporation Atom Processor S1200 PCI Express Root Port 2 [8086:0c47] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fe440000 (64-bit, non-prefetchable) [size=128K]
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fe200000-fe2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation Atom Processor S1200 PCI Express Root Port 3 [8086:0c48] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fe420000 (64-bit, non-prefetchable) [size=128K]
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
Memory behind bridge: fd800000-fe0fffff
Prefetchable memory behind bridge: 00000000fc000000-00000000fcffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Intel Corporation Atom Processor S1200 PCI Express Root Port 4 [8086:0c49] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=128K]
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe100000-fe1fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0e.0 IOMMU [0806]: Intel Corporation Atom Processor S1200 Internal [8086:0c54] (rev 02)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 5
Capabilities: <access denied>
00:13.0 System peripheral [0880]: Intel Corporation Atom Processor S1200 SMBus 2.0 Controller 0 [8086:0c59] (rev 02)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 68
Region 0: Memory at fe482000 (64-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ismt_smbus
00:13.1 System peripheral [0880]: Intel Corporation Atom Processor S1200 SMBus 2.0 Controller 1 [8086:0c5a] (rev 02)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 69
Region 0: Memory at fe481000 (64-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ismt_smbus
00:14.0 Serial controller [0700]: Intel Corporation Atom Processor S1200 UART [8086:0c5f] (rev 02) (prog-if 02 [16550])
Subsystem: Super Micro Computer Inc Device [15d9:0651]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at f000 [size=8]
Region 1: Memory at fe480000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: serial
00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor S1200 Integrated Legacy Bus [8086:0c60] (rev 02)
Subsystem: Super Micro Computer Inc Device [15d9:0651]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: lpc_sch
01:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller [1b4b:9230] (rev 10) (prog-if 01 [AHCI 1.0])
Subsystem: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller [1b4b:9230]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 53
Region 0: I/O ports at e050 [size=8]
Region 1: I/O ports at e040 [size=4]
Region 2: I/O ports at e030 [size=8]
Region 3: I/O ports at e020 [size=4]
Region 4: I/O ports at e000 [size=32]
Region 5: Memory at fe310000 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at fe300000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
02:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller [1912:0014] (rev 03) (prog-if 30 [XHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe200000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
03:00.0 PCI bridge [0604]: Tundra Semiconductor Corp. Device [10e3:8113] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=03, secondary=04, subordinate=04, sec-latency=64
Memory behind bridge: fd800000-fe0fffff
Prefetchable memory behind bridge: 00000000fc000000-00000000fcffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
04:03.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 [102b:0532] (rev 0a) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at fe000000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at fd800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
05:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)
Subsystem: Super Micro Computer Inc Device [15d9:1521]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe120000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d020 [size=32]
Region 3: Memory at fe144000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
05:00.1 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)
Subsystem: Super Micro Computer Inc Device [15d9:1521]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d000 [size=32]
Region 3: Memory at fe140000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 0557:2221 ATEN International Co., Ltd Winbond Hermon
Bus 001 Device 002: ID 04fa:2490 Dallas Semiconductor DS1490F 2-in-1 Fob, 1-Wire adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16-2-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16-2-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-2-amd64/prerm/removing-running-kernel-3.16-2-amd64: true
linux-image-3.16-2-amd64/postinst/depmod-error-initrd-3.16-2-amd64: false
linux-image-3.16-2-amd64/postinst/mips-initrd-3.16-2-amd64:
--
To UNSUBSCRIBE, email to debian-bugs-...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listm...@lists.debian.org
Ben Hutchings
Sep 29, 2014, 8:20:02 PM9/29/14
to
On Mon, 2014-09-29 at 11:57 +0200, Christophe Thil wrote:
> Package: src:linux
> Version: 3.16.3-2
> Severity: normal
>
> Dear Maintainer,
>
> with Kernel 3.16, intel_idle is enabled for the Intel Atom S1260 CPU
> (Centerton SoC). This leads to a +20°C temperature increase when the CPU
> is idle, exceeding the 100°C alarm threshold for passive cooled systems
> like the Supermicro X9SBAA-F.
>
> With 3.14, intel_idle was blacklisted for this CPU, which runs fine. If
> 3.16 is booted with intel_idle.max_cstate=0 processor.max_cstate=0,
> which disables the intel_idle, the CPU also stays cool.
[...]
> Package: src:linux
> Version: 3.16.3-2
> Severity: normal
>
> Dear Maintainer,
>
> with Kernel 3.16, intel_idle is enabled for the Intel Atom S1260 CPU
> (Centerton SoC). This leads to a +20°C temperature increase when the CPU
> is idle, exceeding the 100°C alarm threshold for passive cooled systems
> like the Supermicro X9SBAA-F.
>
> With 3.14, intel_idle was blacklisted for this CPU, which runs fine. If
> 3.16 is booted with intel_idle.max_cstate=0 processor.max_cstate=0,
> which disables the intel_idle, the CPU also stays cool.
It looks like the relevant change is:
commit acead1b0fac5b10d0ae3f1cc5f7820b9f9f924f5
Author: Jan Kiszka <jan.k...@siemens.com>
Date: Sat Jan 25 22:24:22 2014 +0100
intel_idle: Add CPU model 54 (Atom N2000 series)
Add CPU ID for Atom N2600/N2800 processors. Datasheets indicate support
for this, detailed information about potential quirks or limitations are
missing, though. So we just reuse the definition for the previous ATOM
series. [...]
as those processors are part of the same Atom generation as Centerton.
I think that more specific ID matching is required here.
Ben.
--
Ben Hutchings
The two most common things in the universe are hydrogen and stupidity.
Jan Kiszka
Sep 30, 2014, 2:20:01 AM9/30/14
to
model ID (0x36) as the Cedarview. If they do, what other means of
differentiation do we have?
Jan
--
Siemens AG, Corporate Technology, CT RTC ITP SES-DE
Corporate Competence Center Embedded Linux
Jan Kiszka
Oct 1, 2014, 9:10:02 AM10/1/14
to
On 2014-10-01 14:42, Christophe Thil wrote:
> I have attached the output of /proc/cpuinfo (kernel 3.16-2-amd64) and cpuid (20140123).
This is from my N2800:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 54
model name : Intel(R) Atom(TM) CPU N2800 @ 1.86GHz
stepping : 1
microcode : 0x10d
cpu MHz : 798.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm arat dtherm
bogomips : 3733.68
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
Comparing it to your cpuinfo, the stepping may make the difference -
hope it's not just the name... Suggestions?
> I have attached the output of /proc/cpuinfo (kernel 3.16-2-amd64) and cpuid (20140123).
This is from my N2800:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 54
model name : Intel(R) Atom(TM) CPU N2800 @ 1.86GHz
stepping : 1
microcode : 0x10d
cpu MHz : 798.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm arat dtherm
bogomips : 3733.68
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
Comparing it to your cpuinfo, the stepping may make the difference -
hope it's not just the name... Suggestions?
Brown, Len
Oct 9, 2014, 1:00:02 AM10/9/14
to
okay, so they are both model 0x36...
please send me the output from
grep . /sys/devices/system/cpu/cpu*/cpuidle/*/*
which will show the states being used in both the ACPI and the intel_idle scenarios.
thanks,
-Len
please send me the output from
grep . /sys/devices/system/cpu/cpu*/cpuidle/*/*
which will show the states being used in both the ACPI and the intel_idle scenarios.
thanks,
-Len
Debian Bug Tracking System
May 1, 2021, 3:30:03 PM5/1/21
to
Your message dated Sat, 01 May 2021 12:24:17 -0700 (PDT)
with message-id <608daae1.1c69f...@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #763320,
regarding linux-image-3.16-2-amd64: intel_idle enabled for Intel Atom S1260, causes high CPU temperature when idle
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
763320: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=763320
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
with message-id <608daae1.1c69f...@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #763320,
regarding linux-image-3.16-2-amd64: intel_idle enabled for Intel Atom S1260, causes high CPU temperature when idle
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
763320: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=763320
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
0 new messages