Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Bug#875621: linux: ThinkPad X270 Synaptics touchpad: please enable CONFIG_RMI4_SMB
471 views
Skip to first unread message
Chris Boot
Sep 12, 2017, 2:40:02 PM9/12/17
to
Source: linux
Version: 4.12.6-1
Severity: wishlist
Dear Maintainer,
During boot, the 4.12 kernel suggests some additional kernel options
should be enabled to improve touchpad support:
Sep 8 14:18:15 muta kernel: [ 4.089833] psmouse serio1: synaptics:
queried max coordinates: x [..5712], y [..4780]
Sep 8 14:18:15 muta kernel: [ 4.121930] psmouse serio1: synaptics:
queried min coordinates: x [1232..], y [1074..]
Sep 8 14:18:15 muta kernel: [ 4.121939] psmouse serio1: synaptics:
The touchpad can support a better bus than the too old PS/2 protocol.
Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a
better touchpad experience.
Sep 8 14:18:15 muta kernel: [ 4.184718] psmouse serio1: synaptics:
Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps:
0xf407a3/0x943300/0x12e800/0x410000, board id: 3075, fw id: 2477413
Sep 8 14:18:15 muta kernel: [ 4.184735] psmouse serio1: synaptics:
serio: Synaptics pass-through port at isa0060/serio1/input0
Please consider enabling CONFIG_RMI4_SMB.
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS is already enabled:
bootc@muta ~ $ egrep 'MOUSE_PS2_SYNAPTICS_SMBUS|RMI4_SMB'
/boot/config-4.12.0-1-amd64
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
# CONFIG_RMI4_SMB is not set
Thanks,
Chris
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.12.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Version: 4.12.6-1
Severity: wishlist
Dear Maintainer,
During boot, the 4.12 kernel suggests some additional kernel options
should be enabled to improve touchpad support:
Sep 8 14:18:15 muta kernel: [ 4.089833] psmouse serio1: synaptics:
queried max coordinates: x [..5712], y [..4780]
Sep 8 14:18:15 muta kernel: [ 4.121930] psmouse serio1: synaptics:
queried min coordinates: x [1232..], y [1074..]
Sep 8 14:18:15 muta kernel: [ 4.121939] psmouse serio1: synaptics:
The touchpad can support a better bus than the too old PS/2 protocol.
Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a
better touchpad experience.
Sep 8 14:18:15 muta kernel: [ 4.184718] psmouse serio1: synaptics:
Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps:
0xf407a3/0x943300/0x12e800/0x410000, board id: 3075, fw id: 2477413
Sep 8 14:18:15 muta kernel: [ 4.184735] psmouse serio1: synaptics:
serio: Synaptics pass-through port at isa0060/serio1/input0
Please consider enabling CONFIG_RMI4_SMB.
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS is already enabled:
bootc@muta ~ $ egrep 'MOUSE_PS2_SYNAPTICS_SMBUS|RMI4_SMB'
/boot/config-4.12.0-1-amd64
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
# CONFIG_RMI4_SMB is not set
Thanks,
Chris
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.12.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Josh Triplett
Oct 28, 2017, 2:00:02 AM10/28/17
to
Package: src:linux
Version: 4.13.4-2
Followup-For: Bug #875621
Same issue here with the X1 Carbon 5th generation.
-- Package-specific info:
** Version:
Linux version 4.13.0-1-amd64 (debian...@lists.debian.org) (gcc version 6.4.0 20171010 (Debian 6.4.0-8)) #1 SMP Debian 4.13.4-2 (2017-10-15)
** Command line:
BOOT_IMAGE=/vmlinuz-4.13.0-1-amd64 root=UUID=121586a4-bf8c-49a4-9a72-ed70fcf72772 ro quiet
** Not tainted
** Model information
sys_vendor: LENOVO
product_name: 20HRCTO1WW
product_version: ThinkPad X1 Carbon 5th
chassis_vendor: LENOVO
chassis_version: None
bios_vendor: LENOVO
bios_version: N1MET37W (1.22 )
board_vendor: LENOVO
board_name: 20HRCTO1WW
board_version: SDK0J40709 WIN
** Loaded modules:
ctr
ccm
rfcomm
fuse
cmac
bnep
arc4
snd_hda_codec_hdmi
snd_hda_codec_conexant
snd_hda_codec_generic
wmi_bmof
intel_rapl
snd_soc_skl
x86_pkg_temp_thermal
intel_powerclamp
snd_soc_skl_ipc
snd_soc_sst_ipc
coretemp
snd_soc_sst_dsp
kvm_intel
snd_hda_ext_core
snd_soc_sst_match
snd_soc_core
snd_compress
kvm
irqbypass
intel_cstate
intel_uncore
intel_rapl_perf
iwlmvm
hci_uart
btqca
btusb
btrtl
mac80211
btbcm
btintel
bluetooth
evdev
joydev
serio_raw
uvcvideo
iwlwifi
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
snd_hda_intel
videobuf2_core
snd_hda_codec
videodev
snd_hda_core
snd_hwdep
iTCO_wdt
snd_pcm
iTCO_vendor_support
media
snd_timer
cfg80211
cdc_mbim
cdc_wdm
cdc_ncm
drbg
usbnet
ansi_cprng
rtsx_pci_ms
thinkpad_acpi
nvram
snd
memstick
qcserial
ucsi_acpi
mei_me
typec_ucsi
usb_wwan
soundcore
usbserial
ecdh_generic
mii
shpchp
intel_pch_thermal
mei
typec
battery
ac
i915
tpm_crb
rfkill
video
drm_kms_helper
intel_lpss_acpi
intel_lpss
drm
wmi
i2c_algo_bit
acpi_pad
button
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
algif_skcipher
af_alg
dm_crypt
dm_mod
crct10dif_pclmul
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
pcbc
rtsx_pci_sdmmc
mmc_core
aesni_intel
aes_x86_64
crypto_simd
glue_helper
cryptd
psmouse
e1000e
ptp
pps_core
i2c_i801
xhci_pci
nvme
xhci_hcd
nvme_core
rtsx_pci
mfd_core
usbcore
usb_common
thermal
i2c_hid
hid
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [8086:5904] (rev 02)
Subsystem: Lenovo Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (ThinkPad X1 Carbon 5th Gen) [17aa:224f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 620 [8086:5916] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Lenovo HD Graphics 620 (ThinkPad X1 Carbon 5th Gen) [17aa:224f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 129
Region 0: Memory at eb000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 60000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at e000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:08.0 System peripheral [0880]: Intel Corporation Skylake Gaussian Mixture Model [8086:1911]
Subsystem: Lenovo Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model (ThinkPad X1 Carbon 5th Gen) [17aa:224f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 255
Region 0: Memory at ec348000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21) (prog-if 30 [XHCI])
Subsystem: Lenovo Sunrise Point-LP USB 3.0 xHCI Controller [17aa:224f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 124
Region 0: Memory at ec320000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
Subsystem: Lenovo Sunrise Point-LP Thermal subsystem (ThinkPad X1 Carbon 5th Gen) [17aa:224f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at ec349000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
Subsystem: Lenovo Sunrise Point-LP CSME HECI [17aa:224f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 131
Region 0: Memory at ec34a000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port [8086:9d10] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: ec200000-ec2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port [8086:9d12] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: ec100000-ec1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 [8086:9d14] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: ec000000-ec0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 [8086:9d18] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=06, subordinate=70, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: bc000000-ea0fffff
Prefetchable memory behind bridge: 0000000070000000-00000000b9ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC Controller [8086:9d58] (rev 21)
Subsystem: Lenovo Sunrise Point-LP LPC Controller (ThinkPad X1 Carbon 5th Gen) [17aa:224f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
Subsystem: Lenovo Sunrise Point-LP PMC (ThinkPad X1 Carbon 5th Gen) [17aa:224f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at ec344000 (32-bit, non-prefetchable) [size=16K]
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d71] (rev 21)
Subsystem: Lenovo Sunrise Point-LP HD Audio [17aa:224f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 132
Region 0: Memory at ec340000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at ec330000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
Subsystem: Lenovo Sunrise Point-LP SMBus (ThinkPad X1 Carbon 5th Gen) [17aa:224f]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ec34b000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (4) I219-V [8086:15d8] (rev 21)
Subsystem: Lenovo Ethernet Connection (4) I219-V (ThinkPad X1 Carbon 5th Gen) [17aa:224f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 125
Region 0: Memory at ec300000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01)
Subsystem: Lenovo RTS525A PCI Express Card Reader (ThinkPad X1 Carbon 5th Gen) [17aa:224f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 122
Region 1: Memory at ec200000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
04:00.0 Network controller [0280]: Intel Corporation Wireless 8265 / 8275 [8086:24fd] (rev 88)
Subsystem: Intel Corporation Wireless 8265 / 8275 (Dual Band Wireless-AC 8265) [8086:1130]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 130
Region 0: Memory at ec100000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
05:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a804] (prog-if 02 [NVM Express])
Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a801]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at ec000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 138a:0097 Validity Sensors, Inc.
Bus 001 Device 004: ID 04f2:b5ce Chicony Electronics Co., Ltd
Bus 001 Device 003: ID 8087:0a2b Intel Corp.
Bus 001 Device 002: ID 1199:9079 Sierra Wireless, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: buster/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 4.13.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE=C.UTF-8 (charmap=UTF-8)
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 24-1
ii linux-base 4.5
Versions of packages linux-image-4.13.0-1-amd64 recommends:
ii firmware-linux-free 3.4
pn irqbalance <none>
Versions of packages linux-image-4.13.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02-2
pn linux-doc-4.13 <none>
Versions of packages linux-image-4.13.0-1-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20170823-1
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Version: 4.13.4-2
Followup-For: Bug #875621
Same issue here with the X1 Carbon 5th generation.
-- Package-specific info:
** Version:
Linux version 4.13.0-1-amd64 (debian...@lists.debian.org) (gcc version 6.4.0 20171010 (Debian 6.4.0-8)) #1 SMP Debian 4.13.4-2 (2017-10-15)
** Command line:
BOOT_IMAGE=/vmlinuz-4.13.0-1-amd64 root=UUID=121586a4-bf8c-49a4-9a72-ed70fcf72772 ro quiet
** Not tainted
** Model information
sys_vendor: LENOVO
product_name: 20HRCTO1WW
product_version: ThinkPad X1 Carbon 5th
chassis_vendor: LENOVO
chassis_version: None
bios_vendor: LENOVO
bios_version: N1MET37W (1.22 )
board_vendor: LENOVO
board_name: 20HRCTO1WW
board_version: SDK0J40709 WIN
** Loaded modules:
ctr
ccm
rfcomm
fuse
cmac
bnep
arc4
snd_hda_codec_hdmi
snd_hda_codec_conexant
snd_hda_codec_generic
wmi_bmof
intel_rapl
snd_soc_skl
x86_pkg_temp_thermal
intel_powerclamp
snd_soc_skl_ipc
snd_soc_sst_ipc
coretemp
snd_soc_sst_dsp
kvm_intel
snd_hda_ext_core
snd_soc_sst_match
snd_soc_core
snd_compress
kvm
irqbypass
intel_cstate
intel_uncore
intel_rapl_perf
iwlmvm
hci_uart
btqca
btusb
btrtl
mac80211
btbcm
btintel
bluetooth
evdev
joydev
serio_raw
uvcvideo
iwlwifi
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
snd_hda_intel
videobuf2_core
snd_hda_codec
videodev
snd_hda_core
snd_hwdep
iTCO_wdt
snd_pcm
iTCO_vendor_support
media
snd_timer
cfg80211
cdc_mbim
cdc_wdm
cdc_ncm
drbg
usbnet
ansi_cprng
rtsx_pci_ms
thinkpad_acpi
nvram
snd
memstick
qcserial
ucsi_acpi
mei_me
typec_ucsi
usb_wwan
soundcore
usbserial
ecdh_generic
mii
shpchp
intel_pch_thermal
mei
typec
battery
ac
i915
tpm_crb
rfkill
video
drm_kms_helper
intel_lpss_acpi
intel_lpss
drm
wmi
i2c_algo_bit
acpi_pad
button
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
algif_skcipher
af_alg
dm_crypt
dm_mod
crct10dif_pclmul
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
pcbc
rtsx_pci_sdmmc
mmc_core
aesni_intel
aes_x86_64
crypto_simd
glue_helper
cryptd
psmouse
e1000e
ptp
pps_core
i2c_i801
xhci_pci
nvme
xhci_hcd
nvme_core
rtsx_pci
mfd_core
usbcore
usb_common
thermal
i2c_hid
hid
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [8086:5904] (rev 02)
Subsystem: Lenovo Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (ThinkPad X1 Carbon 5th Gen) [17aa:224f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 620 [8086:5916] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Lenovo HD Graphics 620 (ThinkPad X1 Carbon 5th Gen) [17aa:224f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 129
Region 0: Memory at eb000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 60000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at e000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:08.0 System peripheral [0880]: Intel Corporation Skylake Gaussian Mixture Model [8086:1911]
Subsystem: Lenovo Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model (ThinkPad X1 Carbon 5th Gen) [17aa:224f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 255
Region 0: Memory at ec348000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21) (prog-if 30 [XHCI])
Subsystem: Lenovo Sunrise Point-LP USB 3.0 xHCI Controller [17aa:224f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 124
Region 0: Memory at ec320000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
Subsystem: Lenovo Sunrise Point-LP Thermal subsystem (ThinkPad X1 Carbon 5th Gen) [17aa:224f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at ec349000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
Subsystem: Lenovo Sunrise Point-LP CSME HECI [17aa:224f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 131
Region 0: Memory at ec34a000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port [8086:9d10] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: ec200000-ec2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port [8086:9d12] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: ec100000-ec1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 [8086:9d14] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: ec000000-ec0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 [8086:9d18] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=06, subordinate=70, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: bc000000-ea0fffff
Prefetchable memory behind bridge: 0000000070000000-00000000b9ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC Controller [8086:9d58] (rev 21)
Subsystem: Lenovo Sunrise Point-LP LPC Controller (ThinkPad X1 Carbon 5th Gen) [17aa:224f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
Subsystem: Lenovo Sunrise Point-LP PMC (ThinkPad X1 Carbon 5th Gen) [17aa:224f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at ec344000 (32-bit, non-prefetchable) [size=16K]
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d71] (rev 21)
Subsystem: Lenovo Sunrise Point-LP HD Audio [17aa:224f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 132
Region 0: Memory at ec340000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at ec330000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
Subsystem: Lenovo Sunrise Point-LP SMBus (ThinkPad X1 Carbon 5th Gen) [17aa:224f]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ec34b000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (4) I219-V [8086:15d8] (rev 21)
Subsystem: Lenovo Ethernet Connection (4) I219-V (ThinkPad X1 Carbon 5th Gen) [17aa:224f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 125
Region 0: Memory at ec300000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01)
Subsystem: Lenovo RTS525A PCI Express Card Reader (ThinkPad X1 Carbon 5th Gen) [17aa:224f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 122
Region 1: Memory at ec200000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
04:00.0 Network controller [0280]: Intel Corporation Wireless 8265 / 8275 [8086:24fd] (rev 88)
Subsystem: Intel Corporation Wireless 8265 / 8275 (Dual Band Wireless-AC 8265) [8086:1130]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 130
Region 0: Memory at ec100000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
05:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a804] (prog-if 02 [NVM Express])
Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a801]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at ec000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 138a:0097 Validity Sensors, Inc.
Bus 001 Device 004: ID 04f2:b5ce Chicony Electronics Co., Ltd
Bus 001 Device 003: ID 8087:0a2b Intel Corp.
Bus 001 Device 002: ID 1199:9079 Sierra Wireless, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: buster/sid
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 4.13.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE=C.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.13.0-1-amd64 depends on:
Init: systemd (via /run/systemd/system)
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 24-1
ii linux-base 4.5
Versions of packages linux-image-4.13.0-1-amd64 recommends:
ii firmware-linux-free 3.4
pn irqbalance <none>
Versions of packages linux-image-4.13.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02-2
pn linux-doc-4.13 <none>
Versions of packages linux-image-4.13.0-1-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20170823-1
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Chris Boot
Oct 30, 2017, 6:50:02 PM10/30/17
to
Hi folks,
I have a Lenovo ThinkPad X270 and noticed that my kernel (Debian
buster/testing stock kernel) was suggesting that my Touchpad would
benefit from having CONFIG_RMI4_SMB enabled, so I raised this Debian bug:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=875621
This was closed today with an updated Debian kernel upload,
linux_4.13.10-1 (thanks Ben). The new kernel now says:
Oct 30 22:13:49 muta kernel: [ 3.557065] hid-generic
0003:1050:0407.0002: hiddev0,hidraw1: USB HID v1.10 Device [Yubico
Yubikey 4 OTP+U2F+CCID] on usb-0000:00:14.0-6/input1
Oct 30 22:13:49 muta kernel: [ 3.574540] psmouse serio1: synaptics:
Your touchpad (PNP: LEN2049 PNP0f13) says it can support a different
bus. If i2c-hid and hid-rmi are not used, you might want to try setting
psmouse.synaptics_intertouch to 1 and report this to
linux...@vger.kernel.org.
Oct 30 22:13:49 muta kernel: [ 3.674976] psmouse serio1: synaptics:
TouchPad as /devices/platform/i8042/serio1/input/input2
Oct 30 22:13:49 muta kernel: [ 4.393051] psmouse serio2: trackpoint:
IBM TrackPoint firmware: 0x0e, buttons: 3/3
Oct 30 22:13:49 muta kernel: [ 4.620327] input: TPPS/2 IBM TrackPoint
as /devices/platform/i8042/serio1/serio2/input/input4
So I enabled psmouse.synaptics_intertouch=1 on my kernel command line
and voila, rmi4_smbus is used and my Touchpad is apparently much better
off for it. Great! Except I can't use my TrackPoint now, it no longer
shows up at all:
Oct 30 22:17:20 muta kernel: [ 3.478867] psmouse serio1: synaptics:
Trying to set up SMBus access
Oct 30 22:17:20 muta kernel: [ 9.163140] rmi4_smbus 0-002c:
registering SMbus-connected sensor
Oct 30 22:17:20 muta kernel: [ 9.262824] rmi4_f01 rmi4-00.fn01: found
RMI device, manufacturer: Synaptics, product: TM3075-007, fw id: 2477413
Oct 30 22:17:20 muta kernel: [ 9.375014] input: Synaptics TM3075-007
as /devices/rmi4-00/input/input10
So I'm emailing both about having to enable synaptics_intertouch for my
Touchpad as instructed in dmesg, and also that enabling it makes my
TrackPoint disappear.
Please CC me on all replies, I'm not subscribed to linux...@v.k.o.
Thanks,
Chris
--
Chris Boot
bo...@boo.tc
I have a Lenovo ThinkPad X270 and noticed that my kernel (Debian
buster/testing stock kernel) was suggesting that my Touchpad would
benefit from having CONFIG_RMI4_SMB enabled, so I raised this Debian bug:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=875621
This was closed today with an updated Debian kernel upload,
linux_4.13.10-1 (thanks Ben). The new kernel now says:
Oct 30 22:13:49 muta kernel: [ 3.557065] hid-generic
0003:1050:0407.0002: hiddev0,hidraw1: USB HID v1.10 Device [Yubico
Yubikey 4 OTP+U2F+CCID] on usb-0000:00:14.0-6/input1
Oct 30 22:13:49 muta kernel: [ 3.574540] psmouse serio1: synaptics:
queried max coordinates: x [..5712], y [..4780]
Oct 30 22:13:49 muta kernel: [ 3.608224] psmouse serio1: synaptics:
queried min coordinates: x [1232..], y [1074..]
Oct 30 22:13:49 muta kernel: [ 3.608238] psmouse serio1: synaptics:
Your touchpad (PNP: LEN2049 PNP0f13) says it can support a different
bus. If i2c-hid and hid-rmi are not used, you might want to try setting
psmouse.synaptics_intertouch to 1 and report this to
linux...@vger.kernel.org.
Oct 30 22:13:49 muta kernel: [ 3.674976] psmouse serio1: synaptics:
Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps:
0xf407a3/0x943300/0x12e800/0x410000, board id: 3075, fw id: 2477413
Oct 30 22:13:49 muta kernel: [ 3.674997] psmouse serio1: synaptics:
0xf407a3/0x943300/0x12e800/0x410000, board id: 3075, fw id: 2477413
serio: Synaptics pass-through port at isa0060/serio1/input0
Oct 30 22:13:49 muta kernel: [ 3.717820] input: SynPS/2 Synaptics
TouchPad as /devices/platform/i8042/serio1/input/input2
Oct 30 22:13:49 muta kernel: [ 4.393051] psmouse serio2: trackpoint:
IBM TrackPoint firmware: 0x0e, buttons: 3/3
Oct 30 22:13:49 muta kernel: [ 4.620327] input: TPPS/2 IBM TrackPoint
as /devices/platform/i8042/serio1/serio2/input/input4
So I enabled psmouse.synaptics_intertouch=1 on my kernel command line
and voila, rmi4_smbus is used and my Touchpad is apparently much better
off for it. Great! Except I can't use my TrackPoint now, it no longer
shows up at all:
Oct 30 22:17:20 muta kernel: [ 3.478867] psmouse serio1: synaptics:
queried max coordinates: x [..5712], y [..4780]
Oct 30 22:17:20 muta kernel: [ 3.513094] psmouse serio1: synaptics:
queried min coordinates: x [1232..], y [1074..]
Oct 30 22:17:20 muta kernel: [ 3.513098] psmouse serio1: synaptics:
Trying to set up SMBus access
Oct 30 22:17:20 muta kernel: [ 9.163140] rmi4_smbus 0-002c:
registering SMbus-connected sensor
Oct 30 22:17:20 muta kernel: [ 9.262824] rmi4_f01 rmi4-00.fn01: found
RMI device, manufacturer: Synaptics, product: TM3075-007, fw id: 2477413
Oct 30 22:17:20 muta kernel: [ 9.375014] input: Synaptics TM3075-007
as /devices/rmi4-00/input/input10
So I'm emailing both about having to enable synaptics_intertouch for my
Touchpad as instructed in dmesg, and also that enabling it makes my
TrackPoint disappear.
Please CC me on all replies, I'm not subscribed to linux...@v.k.o.
Thanks,
Chris
--
Chris Boot
bo...@boo.tc
Damjan Georgievski
Oct 31, 2017, 7:30:02 AM10/31/17
to
you need to load the » rmi_smbus « module before loading psmouse
--
damjan
Chris Boot
Jan 2, 2018, 4:10:03 AM1/2/18
to
On 02/01/18 02:06, jus...@justin.sh wrote:
> I'm running Debian testing on an X1 Carbon 5th gen with the following kernel,
>
>> Linux debian 4.14.0-2-amd64 #1 SMP Debian 4.14.7-1 (2017-12-22) x86_64 GNU/Linux
>
> I'm experiencing latency issues with the trackpoint and I came across your messages regarding Debian Bug#875621
>
> Did you ever end up resolving your issues? If so, how? Please be specific as I don't have much experience dealing with hardware issues like this.
I didn't really have any latency issues on my X270 at all, I just
noticed the dmesg output because I routinely check dmesg when I upgrade
the kernel - I'm a bit sad like that. So I raised #875621 to have the
options enabled.
In fact with CONFIG_RMI4_SMB enabled and psmouse.synaptics_intertouch=1
(needed because my TouchPad isn't in the whitelist) I ran into issues
where my TrackPoint stopped working. I mailed
linux...@vger.kernel.org[1] and all I got was someone suggesting
loading the modules in a specific order to restore functionality. I
ended up just disabling psmouse.synaptics_intertouch again.
1. https://www.spinics.net/lists/linux-input/msg53749.html
Then #880471 comes along where enabling CONFIG_RMI4_SMB breaks the
TouchPad on the ThinkPad X11e. I noticed that bug and commented that
because nothing improved for me, the new config may as well just be
disabled to avoid further regressions.
Not sure what to suggest here unless someone who is actually involved in
maintaining this stuff (and who knows how it works) steps up to help.
HTH,
Chris
--
Chris Boot
bo...@debian.org
> I'm running Debian testing on an X1 Carbon 5th gen with the following kernel,
>
>> Linux debian 4.14.0-2-amd64 #1 SMP Debian 4.14.7-1 (2017-12-22) x86_64 GNU/Linux
>
> I'm experiencing latency issues with the trackpoint and I came across your messages regarding Debian Bug#875621
>
> Did you ever end up resolving your issues? If so, how? Please be specific as I don't have much experience dealing with hardware issues like this.
I didn't really have any latency issues on my X270 at all, I just
noticed the dmesg output because I routinely check dmesg when I upgrade
the kernel - I'm a bit sad like that. So I raised #875621 to have the
options enabled.
In fact with CONFIG_RMI4_SMB enabled and psmouse.synaptics_intertouch=1
(needed because my TouchPad isn't in the whitelist) I ran into issues
where my TrackPoint stopped working. I mailed
linux...@vger.kernel.org[1] and all I got was someone suggesting
loading the modules in a specific order to restore functionality. I
ended up just disabling psmouse.synaptics_intertouch again.
1. https://www.spinics.net/lists/linux-input/msg53749.html
Then #880471 comes along where enabling CONFIG_RMI4_SMB breaks the
TouchPad on the ThinkPad X11e. I noticed that bug and commented that
because nothing improved for me, the new config may as well just be
disabled to avoid further regressions.
Not sure what to suggest here unless someone who is actually involved in
maintaining this stuff (and who knows how it works) steps up to help.
HTH,
Chris
--
Chris Boot
bo...@debian.org
Tony Power
Jan 19, 2018, 8:30:02 AM1/19/18
to
Hi Chris,
Didn't the suggestion in reply to your question helo?
https://www.spinics.net/lists/linux-input/msg53757.html
Cheers,
Tony
Didn't the suggestion in reply to your question helo?
https://www.spinics.net/lists/linux-input/msg53757.html
Cheers,
Tony
Chris Boot
Jan 26, 2018, 12:40:02 PM1/26/18
to
On 19/01/18 13:20, Tony Power wrote:
> Hi Chris,
>
> Didn't the suggestion in reply to your question helo?
> https://www.spinics.net/lists/linux-input/msg53757.html
I didn't try it. I didn't feel like I was missing out by giving up and
> Hi Chris,
>
> Didn't the suggestion in reply to your question helo?
> https://www.spinics.net/lists/linux-input/msg53757.html
just disabling it.
As a user, I shouldn't have to care and the kernel should do the right
thing for me.
Han Boetes
Sep 14, 2018, 3:20:02 AM9/14/18
to
Source: linux
Source-Version: 4.13.10-1
We believe that the bug you reported is fixed in the latest version of
linux, which is due to be installed in the Debian FTP archive.
Dear maintainer,
With every new kernel release I hope these simple instructions from the dmesg are followed:
psmouse serio2: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
But every time I check I see:
% grep -i rmi4_smb /boot/config-4.18.0-1-amd64
# CONFIG_RMI4_SMB is not set
Why is it so hard to enable this kernel option?!
Ben Hutchings
Sep 15, 2018, 9:10:02 AM9/15/18
to
before we enable it again someone will need to investigate and check
that the regression won't happen again.
Ben.
--
Ben Hutchings
Computers are not intelligent. They only think they are.
Martin Garton
Sep 22, 2018, 10:10:03 AM9/22/18
to
As an additional data point, in case it's of any help, I can add that I
also have problems due to CONFIG_RMI4_SMB being disabled. I'm using a
Thinkpad X1 Carbon 6th generation machine.
I have rebuilt my kernel with CONFIG_RMI4_SMB enabled and everything is
fine.
If there are still machines that have issues with this option enabled,
isn't there a way to enable CONFIG_RMI4_SMB in the kernel and use module
blacklisting wherever that module causes problems?
This would seem to be a reasonable way to make things work for everyone
without anyone having to recompile kernels or kernel modules.
--
Martin.
also have problems due to CONFIG_RMI4_SMB being disabled. I'm using a
Thinkpad X1 Carbon 6th generation machine.
I have rebuilt my kernel with CONFIG_RMI4_SMB enabled and everything is
fine.
If there are still machines that have issues with this option enabled,
isn't there a way to enable CONFIG_RMI4_SMB in the kernel and use module
blacklisting wherever that module causes problems?
This would seem to be a reasonable way to make things work for everyone
without anyone having to recompile kernels or kernel modules.
--
Martin.
Brilliantov Kirill Vladimirovich
Oct 27, 2018, 11:50:03 AM10/27/18
to
Hello!
I confirm what problem present at current Debian testing.
$ uname -a
Linux lenovo 4.18.0-2-amd64 #1 SMP Debian 4.18.10-2 (2018-10-07) x86_64 GNU/Linux
$ dmidecode -t system
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present.
Handle 0x000C, DMI type 1, 27 bytes
System Information
Manufacturer: LENOVO
Product Name: 20KH006JRT
Version: ThinkPad X1 Carbon 6th
Serial Number: PF16V6R5
UUID: 4da8444c-2208-11b2-a85c-d6d0a20ce713
Wake-up Type: Power Switch
SKU Number: LENOVO_MT_20KH_BU_Think_FM_ThinkPad X1 Carbon 6th
Family: ThinkPad X1 Carbon 6th
Handle 0x0022, DMI type 12, 5 bytes
System Configuration Options
Handle 0x002E, DMI type 15, 31 bytes
System Event Log
Area Length: 34 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions
Access Address: 0x00F0
Status: Valid, Not Full
Change Token: 0x00000001
Header Format: Type 1
Supported Log Type Descriptors: 4
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: PCI system error
Data Format 2: None
Descriptor 3: System reconfigured
Data Format 3: None
Descriptor 4: Log area reset/cleared
Data Format 4: None
$ $ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (rev 07)
00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 08)
00:08.0 System peripheral: Intel Corporation Skylake Gaussian Mixture Model
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1c.2 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Intel(R) 100 Series Chipset Family LPC Controller/eSPI Controller - 9D4E (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (4) I219-V (rev 21)
02:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)
03:00.0 Wireless controller [0d40]: Intel Corporation Device 7360 (rev 01)
04:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981
$ $ lsusb
Bus 002 Device 002: ID 0bda:0328 Realtek Semiconductor Corp.
Bus 001 Device 003: ID 5986:2115 Acer, Inc
Bus 001 Device 002: ID 8087:0a2b Intel Corp.
Bus 001 Device 005: ID 89e5:101b
........
Bus 001 Device 004: ID 06cb:009a Synaptics, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 16
bDeviceProtocol 255
bMaxPacketSize0 8
idVendor 0x06cb Synaptics, Inc.
idProduct 0x009a
bcdDevice 1.64
iManufacturer 0
iProduct 0
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 53
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 10
I confirm what problem present at current Debian testing.
$ uname -a
Linux lenovo 4.18.0-2-amd64 #1 SMP Debian 4.18.10-2 (2018-10-07) x86_64 GNU/Linux
$ dmidecode -t system
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present.
Handle 0x000C, DMI type 1, 27 bytes
System Information
Manufacturer: LENOVO
Product Name: 20KH006JRT
Version: ThinkPad X1 Carbon 6th
Serial Number: PF16V6R5
UUID: 4da8444c-2208-11b2-a85c-d6d0a20ce713
Wake-up Type: Power Switch
SKU Number: LENOVO_MT_20KH_BU_Think_FM_ThinkPad X1 Carbon 6th
Family: ThinkPad X1 Carbon 6th
Handle 0x0022, DMI type 12, 5 bytes
System Configuration Options
Handle 0x002E, DMI type 15, 31 bytes
System Event Log
Area Length: 34 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions
Access Address: 0x00F0
Status: Valid, Not Full
Change Token: 0x00000001
Header Format: Type 1
Supported Log Type Descriptors: 4
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: PCI system error
Data Format 2: None
Descriptor 3: System reconfigured
Data Format 3: None
Descriptor 4: Log area reset/cleared
Data Format 4: None
$ $ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (rev 07)
00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 08)
00:08.0 System peripheral: Intel Corporation Skylake Gaussian Mixture Model
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1c.2 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Intel(R) 100 Series Chipset Family LPC Controller/eSPI Controller - 9D4E (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (4) I219-V (rev 21)
02:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)
03:00.0 Wireless controller [0d40]: Intel Corporation Device 7360 (rev 01)
04:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981
$ $ lsusb
Bus 002 Device 002: ID 0bda:0328 Realtek Semiconductor Corp.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 06cb:009a Synaptics, Inc.
Bus 001 Device 003: ID 5986:2115 Acer, Inc
Bus 001 Device 002: ID 8087:0a2b Intel Corp.
Bus 001 Device 005: ID 89e5:101b
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
$ lsusb -v
........
Bus 001 Device 004: ID 06cb:009a Synaptics, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 16
bDeviceProtocol 255
bMaxPacketSize0 8
idVendor 0x06cb Synaptics, Inc.
idProduct 0x009a
bcdDevice 1.64
iManufacturer 0
iProduct 0
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 53
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 10
Brilliantov Kirill Vladimirovich
Nov 4, 2018, 4:50:02 AM11/4/18
to
Hello!
Problem solved after enable all RMI4 options and switch to linux-4.19
$ uname -a
Linux lenovo 4.19.0-trunk-amd64 #1 SMP Debian 4.19-1~exp1 (2018-10-08) x86_64 GNU/Linux
$ grep rmi /proc/modules
rmi_smbus 16384 0 - Live 0x0000000000000000 (E)
rmi_core 90112 1 rmi_smbus, Live 0x0000000000000000 (E)
videobuf2_vmalloc 16384 2 uvcvideo,rmi_core, Live 0x0000000000000000 (E)
videobuf2_v4l2 28672 2 uvcvideo,rmi_core, Live 0x0000000000000000 (E)
videobuf2_common 53248 3 uvcvideo,rmi_core,videobuf2_v4l2, Live 0x0000000000000000 (E)
videodev 212992 4 uvcvideo,rmi_core,videobuf2_v4l2,videobuf2_common, Live 0x0000000000000000 (E)
$ cat /etc/modprobe.d/psmouse.conf
options psmouse synaptics_intertouch=1
$ grep RMI4 /boot/config-4.19.0-trunk-amd64
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SPI=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y
$ dmesg | grep psmouse
[ 2.547109] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4758]
[ 2.578804] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1094..]
[ 2.578807] psmouse serio1: synaptics: Trying to set up SMBus access
[ 3.023443] psmouse serio2: trackpoint: Elan TrackPoint firmware: 0x06, buttons: 3/3
Problem solved after enable all RMI4 options and switch to linux-4.19
$ uname -a
Linux lenovo 4.19.0-trunk-amd64 #1 SMP Debian 4.19-1~exp1 (2018-10-08) x86_64 GNU/Linux
$ grep rmi /proc/modules
rmi_smbus 16384 0 - Live 0x0000000000000000 (E)
rmi_core 90112 1 rmi_smbus, Live 0x0000000000000000 (E)
videobuf2_vmalloc 16384 2 uvcvideo,rmi_core, Live 0x0000000000000000 (E)
videobuf2_v4l2 28672 2 uvcvideo,rmi_core, Live 0x0000000000000000 (E)
videobuf2_common 53248 3 uvcvideo,rmi_core,videobuf2_v4l2, Live 0x0000000000000000 (E)
videodev 212992 4 uvcvideo,rmi_core,videobuf2_v4l2,videobuf2_common, Live 0x0000000000000000 (E)
$ cat /etc/modprobe.d/psmouse.conf
options psmouse synaptics_intertouch=1
$ grep RMI4 /boot/config-4.19.0-trunk-amd64
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SPI=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y
$ dmesg | grep psmouse
[ 2.547109] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4758]
[ 2.578804] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1094..]
[ 2.578807] psmouse serio1: synaptics: Trying to set up SMBus access
[ 3.023443] psmouse serio2: trackpoint: Elan TrackPoint firmware: 0x06, buttons: 3/3
Josip Rodin
Nov 12, 2018, 9:10:03 AM11/12/18
to
Hi,
Without this kernel module shipped, users of X1 gen6 are forced to compile,
which is significantly more taxing than just having to unblacklist the
module.
Can't it be shipped, yet added to the default blacklist, until the Yoga X11e
issue is resolved?
(It goes without saying that it's already most annoying to have to fiddle
with anything at all to get basic mouse support on this machine, it's like
it's 1998 all over again and I'm too old for this...)
TIA.
--
2. That which causes joy or happiness.
Without this kernel module shipped, users of X1 gen6 are forced to compile,
which is significantly more taxing than just having to unblacklist the
module.
Can't it be shipped, yet added to the default blacklist, until the Yoga X11e
issue is resolved?
(It goes without saying that it's already most annoying to have to fiddle
with anything at all to get basic mouse support on this machine, it's like
it's 1998 all over again and I'm too old for this...)
TIA.
--
2. That which causes joy or happiness.
Duncan Findlay
Dec 3, 2018, 2:30:04 AM12/3/18
to
I can confirm that recompiling the kernel with CONFIG_RMI4_SMB=m (and only that change) is sufficient to make the Touchpad & TrackPoint usable on the X1 Carbon 6th gen. Without this, it's completely unusable.
This is a regression -- a Debian 9.6 (stretch) live CD does not have this problem with this hardware.
Thanks
Duncan
Felicia Pacifica
Jan 26, 2019, 12:50:02 PM1/26/19
to
I have a Thinkpad T550 and initially had a similar issue:
With the stock kernel in Sid:
dmesg |grep psmouse
psmouse serio1: synaptics: The touchpad can support a better bus than
the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and
RMI4_SMB are enabled to get a better touchpad experience.
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1,
caps: 0xf003a3/0x943300/0x12e800/0x10000, board id: 3053, fw id: 2560
egrep 'MOUSE_PS2_SYNAPTICS_SMBUS|RMI4_SMB' /boot/config-4.19.16
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_RMI4_SMB=y
dmesg |grep psmouse
[ 2.185730] psmouse serio1: synaptics: queried max coordinates: x
[..5676], y [..4758]
[ 2.213569] psmouse serio1: synaptics: queried min coordinates: x
[1266..], y [1096..]
[ 2.213572] psmouse serio1: synaptics: Trying to set up SMBus access
[ 2.717537] psmouse serio2: trackpoint: IBM TrackPoint firmware:
0x0e, buttons: 3/3
egrep -i "synap|alps|etps|elan" /proc/bus/input/devices
N: Name="Synaptics TM3053-003"
sudo dmesg | grep -i len00
[ 0.343154] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303
(active)
[ 0.343168] pnp 00:04: Plug and Play ACPI device, IDs LEN002c PNP0f13
(active)
sudo dmesg | egrep -i "touch|mouse|track"
[ 1.114322] mousedev: PS/2 mouse device common for all mice
[ 2.185730] psmouse serio1: synaptics: queried max coordinates: x
[..5676], y [..4758]
[ 2.213569] psmouse serio1: synaptics: queried min coordinates: x
[1266..], y [1096..]
[ 2.213572] psmouse serio1: synaptics: Trying to set up SMBus access
[ 2.717537] psmouse serio2: trackpoint: IBM TrackPoint firmware:
0x0e, buttons: 3/3
[ 2.790142] input: TPPS/2 IBM TrackPoint as
/devices/rmi4-00/rmi4-00.fn03/serio2/input/input9
That said, I don't really notice any different behavior with the
touchpad :-)
The touchpad and the trackpoint still work but I haven't figured out how
to enable edge scrolling, circular scrolling, nor to set features like
sensitivity.
Someone above stated that he installed xserver-xorg-input-synaptics.
That package has been depcrecated by xserver-xorg-input-libinput:
apt-cache show xserver-xorg-input-libinput
...
This package provides the driver for input devices using libinput library.
It can handle keyboards, mice and touchpads, and essentially replaces the
separate -evdev and -synaptics drivers.
With the stock kernel in Sid:
dmesg |grep psmouse
psmouse serio1: synaptics: The touchpad can support a better bus than
the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and
RMI4_SMB are enabled to get a better touchpad experience.
caps: 0xf003a3/0x943300/0x12e800/0x10000, board id: 3053, fw id: 2560
psmouse serio1: synaptics: serio: Synaptics pass-through port at
isa0060/serio1/input0
isa0060/serio1/input0
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
I built a new kernel 'the Debian way' and now everything looks good:
egrep 'MOUSE_PS2_SYNAPTICS_SMBUS|RMI4_SMB' /boot/config-4.19.16
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_RMI4_SMB=y
dmesg |grep psmouse
[ 2.185730] psmouse serio1: synaptics: queried max coordinates: x
[..5676], y [..4758]
[ 2.213569] psmouse serio1: synaptics: queried min coordinates: x
[1266..], y [1096..]
[ 2.213572] psmouse serio1: synaptics: Trying to set up SMBus access
[ 2.717537] psmouse serio2: trackpoint: IBM TrackPoint firmware:
0x0e, buttons: 3/3
egrep -i "synap|alps|etps|elan" /proc/bus/input/devices
N: Name="Synaptics TM3053-003"
sudo dmesg | grep -i len00
[ 0.343154] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303
(active)
[ 0.343168] pnp 00:04: Plug and Play ACPI device, IDs LEN002c PNP0f13
(active)
sudo dmesg | egrep -i "touch|mouse|track"
[ 1.114322] mousedev: PS/2 mouse device common for all mice
[ 2.185730] psmouse serio1: synaptics: queried max coordinates: x
[..5676], y [..4758]
[ 2.213569] psmouse serio1: synaptics: queried min coordinates: x
[1266..], y [1096..]
[ 2.213572] psmouse serio1: synaptics: Trying to set up SMBus access
[ 2.717537] psmouse serio2: trackpoint: IBM TrackPoint firmware:
0x0e, buttons: 3/3
[ 2.790142] input: TPPS/2 IBM TrackPoint as
/devices/rmi4-00/rmi4-00.fn03/serio2/input/input9
That said, I don't really notice any different behavior with the
touchpad :-)
The touchpad and the trackpoint still work but I haven't figured out how
to enable edge scrolling, circular scrolling, nor to set features like
sensitivity.
Someone above stated that he installed xserver-xorg-input-synaptics.
That package has been depcrecated by xserver-xorg-input-libinput:
apt-cache show xserver-xorg-input-libinput
...
This package provides the driver for input devices using libinput library.
It can handle keyboards, mice and touchpads, and essentially replaces the
separate -evdev and -synaptics drivers.
Felicia Pacifica
Jan 26, 2019, 1:40:02 PM1/26/19
to
Additional info for the kernel I compiled with Synaptics RMI4 bus
support -> RMI4 SMB Support enabled:
dmesg |grep -i smbus
[ 1.401103] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 1.401130] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
support -> RMI4 SMB Support enabled:
dmesg |grep -i smbus
[ 1.401103] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 1.401130] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.213572] psmouse serio1: synaptics: Trying to set up SMBus access
[ 2.216948] rmi4_smbus 0-002c: registering SMbus-connected sensor
Felicia Pacifica
Jan 26, 2019, 3:30:02 PM1/26/19
to
In contrast to what I wrote earlier it appears that
xserver-xorg-input-synaptics *does* need to be installed. I installed
it and now xinput list-props is listing more features such as circular
scrolling. In Plasma system settings touchpad features that were
previously not available are now available.
xinput list-props 12
Device 'Synaptics TM3053-003':
Device Enabled (153): 1
Coordinate Transformation Matrix (155): 1.000000, 0.000000,
0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Accel Profile (285): 1
Device Accel Constant Deceleration (286): 2.500000
Device Accel Adaptive Deceleration (287): 1.000000
Device Accel Velocity Scaling (288): 12.500000
Synaptics Edges (289): 77, 1863, 57, 1005
Synaptics Finger (290): 25, 48, 0
Synaptics Tap Time (291): 180
Synaptics Tap Move (292): 96
Synaptics Tap Durations (293): 180, 180, 100
Synaptics ClickPad (294): 1
Synaptics Middle Button Timeout (295): 0
Synaptics Two-Finger Pressure (296): 282
Synaptics Two-Finger Width (297): 7
Synaptics Scrolling Distance (298): 50, 50
Synaptics Edge Scrolling (299): 1, 0, 0
Synaptics Two-Finger Scrolling (300): 1, 0
Synaptics Move Speed (301): 1.000000, 1.750000, 0.537430,
0.000000
Synaptics Off (302): 2
Synaptics Locked Drags (303): 1
Synaptics Locked Drags Timeout (304): 30000
Synaptics Tap Action (305): 0, 0, 0, 0, 1, 3, 2
Synaptics Click Action (306): 1, 3, 2
Synaptics Circular Scrolling (307): 1
Synaptics Circular Scrolling Distance (308): 0.100007
Synaptics Circular Scrolling Trigger (309): 0
Synaptics Circular Pad (310): 0
Synaptics Palm Detection (311): 0
Synaptics Palm Dimensions (312): 10, 200
Synaptics Coasting Speed (313): 20.000000, 50.000000
Synaptics Pressure Motion (314): 92, 160
Synaptics Pressure Motion Factor (315): 1.000000, 1.000000
Synaptics Grab Event Device (316): 0
Synaptics Gestures (317): 1
Synaptics Capabilities (318): 1, 0, 0, 1, 1, 1, 0
Synaptics Pad Resolution (319): 20, 20
Synaptics Area (320): 0, 0, 0, 0
Synaptics Soft Button Areas (321): 970, 0, 870, 0, 0, 0, 0, 0
Synaptics Noise Cancellation (322): 13, 13
Device Product ID (277): 1739, 0
Device Node (276): "/dev/input/event4"
I did not have to change anything with xorg.conf. This is what was
generated by Xorg -configure after installing xserver-xorg-input-synaptics:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "built-ins"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "Backlight" # <str>
#Option "CustomEDID" # <str>
#Option "DRI" # <str>
#Option "Present" # [<bool>]
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "HWRotation" # [<bool>]
#Option "VSync" # [<bool>]
#Option "PageFlip" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "ReprobeOutputs" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "VirtualHeads" # <i>
#Option "TearFree" # [<bool>]
#Option "PerCrtcPixmaps" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
Identifier "Card0"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Here is the log:
[ 4.000] (--) Log file renamed from "/var/log/Xorg.pid-658.log" to
"/var/log/Xorg.0.log"
[ 4.001]
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[ 4.001] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[ 4.001] Current Operating System: Linux life 4.19.16 #1 SMP Fri Jan
25 13:48:13 MST 2019 x86_64
[ 4.001] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.16
root=UUID=e69a3027-d6b6-4620-8e05-8c8fb8f06b27 ro quiet
[ 4.001] Build Date: 25 October 2018 06:15:23PM
[ 4.001] xorg-server 2:1.20.3-1 (https://www.debian.org/support)
[ 4.001] Current version of pixman: 0.36.0
[ 4.001] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.001] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.001] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 26
12:24:21 2019
[ 4.002] (==) Using config file: "/etc/X11/xorg.conf"
[ 4.002] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.003] (==) ServerLayout "X.org Configured"
[ 4.003] (**) |-->Screen "Screen0" (0)
[ 4.003] (**) | |-->Monitor "Monitor0"
[ 4.003] (**) | |-->Device "Card0"
[ 4.003] (**) |-->Input Device "Mouse0"
[ 4.003] (**) |-->Input Device "Keyboard0"
[ 4.003] (==) Automatically adding devices
[ 4.003] (==) Automatically enabling devices
[ 4.003] (==) Automatically adding GPU devices
[ 4.003] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 4.005] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not
exist.
[ 4.005] Entry deleted from font path.
[ 4.007] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not
exist.
[ 4.007] Entry deleted from font path.
[ 4.007] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 4.007] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 4.007] (WW) Hotplugging is on, devices using drivers 'kbd',
'mouse' or 'vmmouse' will be disabled.
[ 4.007] (WW) Disabling Mouse0
[ 4.007] (WW) Disabling Keyboard0
[ 4.007] (II) Loader magic: 0x564da1d6fe20
[ 4.007] (II) Module ABI versions:
[ 4.007] X.Org ANSI C Emulation: 0.4
[ 4.007] X.Org Video Driver: 24.0
[ 4.007] X.Org XInput driver : 24.1
[ 4.007] X.Org Server Extension : 10.0
[ 4.007] (++) using VT number 7
[ 4.007] (II) systemd-logind: logind integration requires -keeptty
and -keeptty was not provided, disabling logind integration
[ 4.008] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.026] (--) PCI:*(0@0:2:0) 8086:1616:17aa:2223 rev 9, Mem @
0xe0000000/16777216, 0xc0000000/536870912, I/O @ 0x00003000/64, BIOS @
0x????????/131072
[ 4.026] (II) "glx" will be loaded. This was enabled by default and
also specified in the config file.
[ 4.026] (II) LoadModule: "glx"
[ 4.028] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.035] (II) Module glx: vendor="X.Org Foundation"
[ 4.035] compiled for 1.20.3, module version = 1.0.0
[ 4.035] ABI class: X.Org Server Extension, version 10.0
[ 4.035] (II) LoadModule: "intel"
[ 4.036] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4.038] (II) Module intel: vendor="X.Org Foundation"
[ 4.038] compiled for 1.20.1, module version = 2.99.917
[ 4.038] Module class: X.Org Video Driver
[ 4.038] ABI class: X.Org Video Driver, version 24.0
[ 4.038] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 4.038] (II) intel: Driver for Intel(R) HD Graphics
[ 4.038] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 4.038] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 4.045] (II) intel(0): Using Kernel Mode Setting driver: i915,
version 1.6.0 20180719
[ 4.045] (II) intel(0): SNA compiled: xserver-xorg-video-intel
2:2.99.917+git20180925-2 (Andreas Boll <ab...@debian.org>)
[ 4.045] (II) intel(0): SNA compiled for use with valgrind
[ 4.046] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD
Graphics 5500
[ 4.046] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1,
sse4.2, avx, avx2; using a maximum of 2 threads
[ 4.046] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4.046] (==) intel(0): RGB weight 888
[ 4.046] (==) intel(0): Default visual is TrueColor
[ 4.046] (II) intel(0): Output eDP1 using monitor section Monitor0
[ 4.047] (**) intel(0): Found backlight control interface
intel_backlight (type 'raw') for output eDP1
[ 4.047] (II) intel(0): Enabled output eDP1
[ 4.047] (II) intel(0): Output DP1 has no monitor section
[ 4.047] (II) intel(0): Enabled output DP1
[ 4.047] (II) intel(0): Output HDMI1 has no monitor section
[ 4.047] (II) intel(0): Enabled output HDMI1
[ 4.047] (II) intel(0): Output DP2 has no monitor section
[ 4.047] (II) intel(0): Enabled output DP2
[ 4.047] (II) intel(0): Output HDMI2 has no monitor section
[ 4.047] (II) intel(0): Enabled output HDMI2
[ 4.047] (--) intel(0): Using a maximum size of 256x256 for hardware
cursors
[ 4.047] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 4.047] (II) intel(0): Enabled output VIRTUAL1
[ 4.047] (--) intel(0): Output eDP1 using initial mode 1920x1080 on
pipe 0
[ 4.047] (==) intel(0): TearFree enabled
[ 4.047] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.047] (==) intel(0): DPI set to (96, 96)
[ 4.047] (II) Loading sub module "dri3"
[ 4.047] (II) LoadModule: "dri3"
[ 4.047] (II) Module "dri3" already built-in
[ 4.047] (II) Loading sub module "dri2"
[ 4.047] (II) LoadModule: "dri2"
[ 4.047] (II) Module "dri2" already built-in
[ 4.047] (II) Loading sub module "present"
[ 4.047] (II) LoadModule: "present"
[ 4.047] (II) Module "present" already built-in
[ 4.049] (II) intel(0): SNA initialized with Broadwell (gen8) backend
[ 4.049] (==) intel(0): Backing store enabled
[ 4.049] (==) intel(0): Silken mouse enabled
[ 4.050] (II) intel(0): HW Cursor enabled
[ 4.050] (==) intel(0): DPMS enabled
[ 4.050] (==) intel(0): Display hotplug detection enabled
[ 4.051] (II) intel(0): [DRI2] Setup complete
[ 4.051] (II) intel(0): [DRI2] DRI driver: i965
[ 4.051] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 4.051] (II) intel(0): direct rendering: DRI2 enabled
[ 4.051] (II) intel(0): hardware support for Present enabled
[ 4.051] (II) Initializing extension Generic Event Extension
[ 4.051] (II) Initializing extension SHAPE
[ 4.051] (II) Initializing extension MIT-SHM
[ 4.051] (II) Initializing extension XInputExtension
[ 4.051] (II) Initializing extension XTEST
[ 4.051] (II) Initializing extension BIG-REQUESTS
[ 4.051] (II) Initializing extension SYNC
[ 4.052] (II) Initializing extension XKEYBOARD
[ 4.052] (II) Initializing extension XC-MISC
[ 4.052] (II) Initializing extension SECURITY
[ 4.052] (II) Initializing extension XFIXES
[ 4.052] (II) Initializing extension RENDER
[ 4.052] (II) Initializing extension RANDR
[ 4.052] (II) Initializing extension COMPOSITE
[ 4.052] (II) Initializing extension DAMAGE
[ 4.052] (II) Initializing extension MIT-SCREEN-SAVER
[ 4.053] (II) Initializing extension DOUBLE-BUFFER
[ 4.053] (II) Initializing extension RECORD
[ 4.053] (II) Initializing extension DPMS
[ 4.053] (II) Initializing extension Present
[ 4.053] (II) Initializing extension DRI3
[ 4.053] (II) Initializing extension X-Resource
[ 4.053] (II) Initializing extension XVideo
[ 4.053] (II) Initializing extension XVideo-MotionCompensation
[ 4.053] (II) Initializing extension SELinux
[ 4.053] (II) SELinux: Disabled on system
[ 4.053] (II) Initializing extension GLX
[ 4.078] (II) AIGLX: Loaded and initialized i965
[ 4.078] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4.078] (II) Initializing extension XFree86-VidModeExtension
[ 4.078] (II) Initializing extension XFree86-DGA
[ 4.078] (II) Initializing extension XFree86-DRI
[ 4.078] (II) Initializing extension DRI2
[ 4.081] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using
pipe 0, position (0, 0), rotation normal, reflection none
[ 4.090] (II) intel(0): Setting screen physical size to 508 x 285
[ 4.139] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[ 4.139] (**) Power Button: Applying InputClass "libinput keyboard
catchall"
[ 4.139] (II) LoadModule: "libinput"
[ 4.139] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 4.144] (II) Module libinput: vendor="X.Org Foundation"
[ 4.144] compiled for 1.20.1, module version = 0.28.1
[ 4.144] Module class: X.Org XInput Driver
[ 4.144] ABI class: X.Org XInput driver, version 24.1
[ 4.144] (II) Using input driver 'libinput' for 'Power Button'
[ 4.144] (**) Power Button: always reports core events
[ 4.144] (**) Option "Device" "/dev/input/event3"
[ 4.144] (**) Option "_source" "server/udev"
[ 4.147] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 4.147] (II) event3 - Power Button: device is a keyboard
[ 4.147] (II) event3 - Power Button: device removed
[ 4.164] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event3"
[ 4.164] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[ 4.164] (**) Option "xkb_model" "pc105"
[ 4.164] (**) Option "xkb_layout" "us"
[ 4.165] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 4.165] (II) event3 - Power Button: device is a keyboard
[ 4.166] (II) config/udev: Adding input device Video Bus
(/dev/input/event13)
[ 4.166] (**) Video Bus: Applying InputClass "libinput keyboard
catchall"
[ 4.166] (II) Using input driver 'libinput' for 'Video Bus'
[ 4.166] (**) Video Bus: always reports core events
[ 4.166] (**) Option "Device" "/dev/input/event13"
[ 4.166] (**) Option "_source" "server/udev"
[ 4.167] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 4.167] (II) event13 - Video Bus: device is a keyboard
[ 4.167] (II) event13 - Video Bus: device removed
[ 4.200] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event13"
[ 4.200] (II) XINPUT: Adding extended input device "Video Bus"
(type: KEYBOARD, id 7)
[ 4.200] (**) Option "xkb_model" "pc105"
[ 4.200] (**) Option "xkb_layout" "us"
[ 4.203] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 4.203] (II) event13 - Video Bus: device is a keyboard
[ 4.204] (II) config/udev: Adding input device Lid Switch
(/dev/input/event1)
[ 4.204] (II) No input driver specified, ignoring this device.
[ 4.204] (II) This device may have been added with another device file.
[ 4.205] (II) config/udev: Adding input device Sleep Button
(/dev/input/event2)
[ 4.205] (**) Sleep Button: Applying InputClass "libinput keyboard
catchall"
[ 4.205] (II) Using input driver 'libinput' for 'Sleep Button'
[ 4.205] (**) Sleep Button: always reports core events
[ 4.205] (**) Option "Device" "/dev/input/event2"
[ 4.205] (**) Option "_source" "server/udev"
[ 4.206] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 4.206] (II) event2 - Sleep Button: device is a keyboard
[ 4.207] (II) event2 - Sleep Button: device removed
[ 4.228] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event2"
[ 4.228] (II) XINPUT: Adding extended input device "Sleep Button"
(type: KEYBOARD, id 8)
[ 4.228] (**) Option "xkb_model" "pc105"
[ 4.228] (**) Option "xkb_layout" "us"
[ 4.229] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 4.229] (II) event2 - Sleep Button: device is a keyboard
[ 4.230] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=3 (/dev/input/event14)
[ 4.231] (II) No input driver specified, ignoring this device.
[ 4.231] (II) This device may have been added with another device file.
[ 4.231] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=7 (/dev/input/event15)
[ 4.231] (II) No input driver specified, ignoring this device.
[ 4.231] (II) This device may have been added with another device file.
[ 4.231] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=8 (/dev/input/event16)
[ 4.231] (II) No input driver specified, ignoring this device.
[ 4.231] (II) This device may have been added with another device file.
[ 4.232] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=9 (/dev/input/event17)
[ 4.232] (II) No input driver specified, ignoring this device.
[ 4.232] (II) This device may have been added with another device file.
[ 4.232] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=10 (/dev/input/event18)
[ 4.232] (II) No input driver specified, ignoring this device.
[ 4.232] (II) This device may have been added with another device file.
[ 4.233] (II) config/udev: Adding input device Integrated Camera:
Integrated C (/dev/input/event7)
[ 4.233] (**) Integrated Camera: Integrated C: Applying InputClass
"libinput keyboard catchall"
[ 4.233] (II) Using input driver 'libinput' for 'Integrated Camera:
Integrated C'
[ 4.233] (**) Integrated Camera: Integrated C: always reports core
events
[ 4.233] (**) Option "Device" "/dev/input/event7"
[ 4.233] (**) Option "_source" "server/udev"
[ 4.235] (II) event7 - Integrated Camera: Integrated C: is tagged
by udev as: Keyboard
[ 4.235] (II) event7 - Integrated Camera: Integrated C: device is a
keyboard
[ 4.235] (II) event7 - Integrated Camera: Integrated C: device removed
[ 4.284] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input11/event7"
[ 4.284] (II) XINPUT: Adding extended input device "Integrated
Camera: Integrated C" (type: KEYBOARD, id 9)
[ 4.284] (**) Option "xkb_model" "pc105"
[ 4.284] (**) Option "xkb_layout" "us"
[ 4.287] (II) event7 - Integrated Camera: Integrated C: is tagged
by udev as: Keyboard
[ 4.287] (II) event7 - Integrated Camera: Integrated C: device is a
keyboard
[ 4.288] (II) config/udev: Adding input device HDA Digital PCBeep
(/dev/input/event8)
[ 4.288] (II) No input driver specified, ignoring this device.
[ 4.288] (II) This device may have been added with another device file.
[ 4.289] (II) config/udev: Adding input device HDA Intel PCH Dock
Mic (/dev/input/event9)
[ 4.289] (II) No input driver specified, ignoring this device.
[ 4.289] (II) This device may have been added with another device file.
[ 4.289] (II) config/udev: Adding input device HDA Intel PCH Mic
(/dev/input/event10)
[ 4.289] (II) No input driver specified, ignoring this device.
[ 4.289] (II) This device may have been added with another device file.
[ 4.290] (II) config/udev: Adding input device HDA Intel PCH Dock
Headphone (/dev/input/event11)
[ 4.290] (II) No input driver specified, ignoring this device.
[ 4.290] (II) This device may have been added with another device file.
[ 4.291] (II) config/udev: Adding input device HDA Intel PCH
Headphone (/dev/input/event12)
[ 4.291] (II) No input driver specified, ignoring this device.
[ 4.291] (II) This device may have been added with another device file.
[ 4.292] (II) config/udev: Adding input device AT Translated Set 2
keyboard (/dev/input/event0)
[ 4.292] (**) AT Translated Set 2 keyboard: Applying InputClass
"libinput keyboard catchall"
[ 4.292] (II) Using input driver 'libinput' for 'AT Translated Set 2
keyboard'
[ 4.292] (**) AT Translated Set 2 keyboard: always reports core events
[ 4.292] (**) Option "Device" "/dev/input/event0"
[ 4.292] (**) Option "_source" "server/udev"
[ 4.293] (II) event0 - AT Translated Set 2 keyboard: is tagged by
udev as: Keyboard
[ 4.293] (II) event0 - AT Translated Set 2 keyboard: device is a
keyboard
[ 4.293] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 4.316] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4.316] (II) XINPUT: Adding extended input device "AT Translated
Set 2 keyboard" (type: KEYBOARD, id 10)
[ 4.316] (**) Option "xkb_model" "pc105"
[ 4.316] (**) Option "xkb_layout" "us"
[ 4.318] (II) event0 - AT Translated Set 2 keyboard: is tagged by
udev as: Keyboard
[ 4.318] (II) event0 - AT Translated Set 2 keyboard: device is a
keyboard
[ 4.320] (II) config/udev: Adding input device PC Speaker
(/dev/input/event5)
[ 4.320] (II) No input driver specified, ignoring this device.
[ 4.320] (II) This device may have been added with another device file.
[ 4.321] (II) config/udev: Adding input device ThinkPad Extra
Buttons (/dev/input/event6)
[ 4.321] (**) ThinkPad Extra Buttons: Applying InputClass "libinput
keyboard catchall"
[ 4.321] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[ 4.321] (**) ThinkPad Extra Buttons: always reports core events
[ 4.321] (**) Option "Device" "/dev/input/event6"
[ 4.321] (**) Option "_source" "server/udev"
[ 4.323] (II) event6 - ThinkPad Extra Buttons: is tagged by udev
as: Keyboard Switch
[ 4.323] (II) event6 - ThinkPad Extra Buttons: device is a keyboard
[ 4.323] (II) event6 - ThinkPad Extra Buttons: device removed
[ 4.340] (**) Option "config_info"
"udev:/sys/devices/platform/thinkpad_acpi/input/input7/event6"
[ 4.340] (II) XINPUT: Adding extended input device "ThinkPad Extra
Buttons" (type: KEYBOARD, id 11)
[ 4.340] (**) Option "xkb_model" "pc105"
[ 4.340] (**) Option "xkb_layout" "us"
[ 4.342] (II) event6 - ThinkPad Extra Buttons: is tagged by udev
as: Keyboard Switch
[ 4.342] (II) event6 - ThinkPad Extra Buttons: device is a keyboard
[ 4.342] (II) config/udev: Adding input device Synaptics TM3053-003
(/dev/input/event4)
[ 4.342] (**) Synaptics TM3053-003: Applying InputClass "libinput
touchpad catchall"
[ 4.342] (**) Synaptics TM3053-003: Applying InputClass "touchpad
catchall"
[ 4.342] (**) Synaptics TM3053-003: Applying InputClass "Default
clickpad buttons"
[ 4.342] (II) LoadModule: "synaptics"
[ 4.343] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4.344] (II) Module synaptics: vendor="X.Org Foundation"
[ 4.344] compiled for 1.20.1, module version = 1.9.1
[ 4.344] Module class: X.Org XInput Driver
[ 4.344] ABI class: X.Org XInput driver, version 24.1
[ 4.344] (II) Using input driver 'synaptics' for 'Synaptics TM3053-003'
[ 4.344] (**) Synaptics TM3053-003: always reports core events
[ 4.344] (**) Option "Device" "/dev/input/event4"
[ 4.380] (II) synaptics: Synaptics TM3053-003: found clickpad property
[ 4.380] (--) synaptics: Synaptics TM3053-003: x-axis range 0 - 1940
(res 20)
[ 4.380] (--) synaptics: Synaptics TM3053-003: y-axis range 0 - 1062
(res 20)
[ 4.380] (--) synaptics: Synaptics TM3053-003: pressure range 0 - 255
[ 4.380] (II) synaptics: Synaptics TM3053-003: device does not
report finger width.
[ 4.380] (--) synaptics: Synaptics TM3053-003: buttons: left double
triple
[ 4.381] (--) synaptics: Synaptics TM3053-003: Vendor 0x6cb Product 0
[ 4.381] (--) synaptics: Synaptics TM3053-003: invalid finger width
range. defaulting to 0 - 15
[ 4.381] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 4.381] (--) synaptics: Synaptics TM3053-003: touchpad found
[ 4.381] (**) Synaptics TM3053-003: always reports core events
[ 4.412] (**) Option "config_info"
"udev:/sys/devices/rmi4-00/input/input3/event4"
[ 4.412] (II) XINPUT: Adding extended input device "Synaptics
TM3053-003" (type: TOUCHPAD, id 12)
[ 4.412] (**) synaptics: Synaptics TM3053-003: (accel) MinSpeed is
now constant deceleration 2.5
[ 4.412] (**) synaptics: Synaptics TM3053-003: (accel) MaxSpeed is
now 1.75
[ 4.412] (**) synaptics: Synaptics TM3053-003: (accel) AccelFactor
is now 0.090
[ 4.413] (**) Synaptics TM3053-003: (accel) keeping acceleration
scheme 1
[ 4.413] (**) Synaptics TM3053-003: (accel) acceleration profile 1
[ 4.413] (**) Synaptics TM3053-003: (accel) acceleration factor: 2.000
[ 4.413] (**) Synaptics TM3053-003: (accel) acceleration threshold: 4
[ 4.413] (--) synaptics: Synaptics TM3053-003: touchpad found
[ 4.414] (II) config/udev: Adding input device Synaptics TM3053-003
(/dev/input/mouse0)
[ 4.414] (**) Synaptics TM3053-003: Ignoring device from InputClass
"touchpad ignore duplicates"
[ 4.415] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint
(/dev/input/event19)
[ 4.415] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput
pointer catchall"
[ 4.415] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[ 4.415] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 4.415] (**) Option "Device" "/dev/input/event19"
[ 4.415] (**) Option "_source" "server/udev"
[ 4.417] (II) event19 - TPPS/2 IBM TrackPoint: is tagged by udev as:
Mouse Pointingstick
[ 4.417] (II) event19 - TPPS/2 IBM TrackPoint: device is a pointer
[ 4.419] (II) event19 - TPPS/2 IBM TrackPoint: device removed
[ 4.460] (**) Option "config_info"
"udev:/sys/devices/rmi4-00/rmi4-00.fn03/serio2/input/input8/event19"
[ 4.460] (II) XINPUT: Adding extended input device "TPPS/2 IBM
TrackPoint" (type: MOUSE, id 13)
[ 4.461] (**) Option "AccelerationScheme" "none"
[ 4.461] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[ 4.461] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 4.461] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 4.463] (II) event19 - TPPS/2 IBM TrackPoint: is tagged by udev as:
Mouse Pointingstick
[ 4.463] (II) event19 - TPPS/2 IBM TrackPoint: device is a pointer
[ 4.466] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint
(/dev/input/mouse1)
[ 4.466] (II) No input driver specified, ignoring this device.
[ 4.466] (II) This device may have been added with another device file.
[ 6.048] (II) intel(0): EDID vendor "CMN", prod id 5571
[ 6.048] (II) intel(0): Printing DDC gathered Modelines:
[ 6.049] (II) intel(0): Modeline "1920x1080"x0.0 136.62 1920 1964
1992 2070 1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)
xserver-xorg-input-synaptics *does* need to be installed. I installed
it and now xinput list-props is listing more features such as circular
scrolling. In Plasma system settings touchpad features that were
previously not available are now available.
xinput list-props 12
Device 'Synaptics TM3053-003':
Device Enabled (153): 1
Coordinate Transformation Matrix (155): 1.000000, 0.000000,
0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Accel Profile (285): 1
Device Accel Constant Deceleration (286): 2.500000
Device Accel Adaptive Deceleration (287): 1.000000
Device Accel Velocity Scaling (288): 12.500000
Synaptics Edges (289): 77, 1863, 57, 1005
Synaptics Finger (290): 25, 48, 0
Synaptics Tap Time (291): 180
Synaptics Tap Move (292): 96
Synaptics Tap Durations (293): 180, 180, 100
Synaptics ClickPad (294): 1
Synaptics Middle Button Timeout (295): 0
Synaptics Two-Finger Pressure (296): 282
Synaptics Two-Finger Width (297): 7
Synaptics Scrolling Distance (298): 50, 50
Synaptics Edge Scrolling (299): 1, 0, 0
Synaptics Two-Finger Scrolling (300): 1, 0
Synaptics Move Speed (301): 1.000000, 1.750000, 0.537430,
0.000000
Synaptics Off (302): 2
Synaptics Locked Drags (303): 1
Synaptics Locked Drags Timeout (304): 30000
Synaptics Tap Action (305): 0, 0, 0, 0, 1, 3, 2
Synaptics Click Action (306): 1, 3, 2
Synaptics Circular Scrolling (307): 1
Synaptics Circular Scrolling Distance (308): 0.100007
Synaptics Circular Scrolling Trigger (309): 0
Synaptics Circular Pad (310): 0
Synaptics Palm Detection (311): 0
Synaptics Palm Dimensions (312): 10, 200
Synaptics Coasting Speed (313): 20.000000, 50.000000
Synaptics Pressure Motion (314): 92, 160
Synaptics Pressure Motion Factor (315): 1.000000, 1.000000
Synaptics Grab Event Device (316): 0
Synaptics Gestures (317): 1
Synaptics Capabilities (318): 1, 0, 0, 1, 1, 1, 0
Synaptics Pad Resolution (319): 20, 20
Synaptics Area (320): 0, 0, 0, 0
Synaptics Soft Button Areas (321): 970, 0, 870, 0, 0, 0, 0, 0
Synaptics Noise Cancellation (322): 13, 13
Device Product ID (277): 1739, 0
Device Node (276): "/dev/input/event4"
I did not have to change anything with xorg.conf. This is what was
generated by Xorg -configure after installing xserver-xorg-input-synaptics:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "built-ins"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "Backlight" # <str>
#Option "CustomEDID" # <str>
#Option "DRI" # <str>
#Option "Present" # [<bool>]
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "HWRotation" # [<bool>]
#Option "VSync" # [<bool>]
#Option "PageFlip" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "ReprobeOutputs" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "VirtualHeads" # <i>
#Option "TearFree" # [<bool>]
#Option "PerCrtcPixmaps" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
Identifier "Card0"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Here is the log:
[ 4.000] (--) Log file renamed from "/var/log/Xorg.pid-658.log" to
"/var/log/Xorg.0.log"
[ 4.001]
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[ 4.001] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[ 4.001] Current Operating System: Linux life 4.19.16 #1 SMP Fri Jan
25 13:48:13 MST 2019 x86_64
[ 4.001] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.16
root=UUID=e69a3027-d6b6-4620-8e05-8c8fb8f06b27 ro quiet
[ 4.001] Build Date: 25 October 2018 06:15:23PM
[ 4.001] xorg-server 2:1.20.3-1 (https://www.debian.org/support)
[ 4.001] Current version of pixman: 0.36.0
[ 4.001] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.001] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.001] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 26
12:24:21 2019
[ 4.002] (==) Using config file: "/etc/X11/xorg.conf"
[ 4.002] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.003] (==) ServerLayout "X.org Configured"
[ 4.003] (**) |-->Screen "Screen0" (0)
[ 4.003] (**) | |-->Monitor "Monitor0"
[ 4.003] (**) | |-->Device "Card0"
[ 4.003] (**) |-->Input Device "Mouse0"
[ 4.003] (**) |-->Input Device "Keyboard0"
[ 4.003] (==) Automatically adding devices
[ 4.003] (==) Automatically enabling devices
[ 4.003] (==) Automatically adding GPU devices
[ 4.003] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 4.005] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not
exist.
[ 4.005] Entry deleted from font path.
[ 4.007] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not
exist.
[ 4.007] Entry deleted from font path.
[ 4.007] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 4.007] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 4.007] (WW) Hotplugging is on, devices using drivers 'kbd',
'mouse' or 'vmmouse' will be disabled.
[ 4.007] (WW) Disabling Mouse0
[ 4.007] (WW) Disabling Keyboard0
[ 4.007] (II) Loader magic: 0x564da1d6fe20
[ 4.007] (II) Module ABI versions:
[ 4.007] X.Org ANSI C Emulation: 0.4
[ 4.007] X.Org Video Driver: 24.0
[ 4.007] X.Org XInput driver : 24.1
[ 4.007] X.Org Server Extension : 10.0
[ 4.007] (++) using VT number 7
[ 4.007] (II) systemd-logind: logind integration requires -keeptty
and -keeptty was not provided, disabling logind integration
[ 4.008] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.026] (--) PCI:*(0@0:2:0) 8086:1616:17aa:2223 rev 9, Mem @
0xe0000000/16777216, 0xc0000000/536870912, I/O @ 0x00003000/64, BIOS @
0x????????/131072
[ 4.026] (II) "glx" will be loaded. This was enabled by default and
also specified in the config file.
[ 4.026] (II) LoadModule: "glx"
[ 4.028] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.035] (II) Module glx: vendor="X.Org Foundation"
[ 4.035] compiled for 1.20.3, module version = 1.0.0
[ 4.035] ABI class: X.Org Server Extension, version 10.0
[ 4.035] (II) LoadModule: "intel"
[ 4.036] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4.038] (II) Module intel: vendor="X.Org Foundation"
[ 4.038] compiled for 1.20.1, module version = 2.99.917
[ 4.038] Module class: X.Org Video Driver
[ 4.038] ABI class: X.Org Video Driver, version 24.0
[ 4.038] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 4.038] (II) intel: Driver for Intel(R) HD Graphics
[ 4.038] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 4.038] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 4.045] (II) intel(0): Using Kernel Mode Setting driver: i915,
version 1.6.0 20180719
[ 4.045] (II) intel(0): SNA compiled: xserver-xorg-video-intel
2:2.99.917+git20180925-2 (Andreas Boll <ab...@debian.org>)
[ 4.045] (II) intel(0): SNA compiled for use with valgrind
[ 4.046] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD
Graphics 5500
[ 4.046] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1,
sse4.2, avx, avx2; using a maximum of 2 threads
[ 4.046] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4.046] (==) intel(0): RGB weight 888
[ 4.046] (==) intel(0): Default visual is TrueColor
[ 4.046] (II) intel(0): Output eDP1 using monitor section Monitor0
[ 4.047] (**) intel(0): Found backlight control interface
intel_backlight (type 'raw') for output eDP1
[ 4.047] (II) intel(0): Enabled output eDP1
[ 4.047] (II) intel(0): Output DP1 has no monitor section
[ 4.047] (II) intel(0): Enabled output DP1
[ 4.047] (II) intel(0): Output HDMI1 has no monitor section
[ 4.047] (II) intel(0): Enabled output HDMI1
[ 4.047] (II) intel(0): Output DP2 has no monitor section
[ 4.047] (II) intel(0): Enabled output DP2
[ 4.047] (II) intel(0): Output HDMI2 has no monitor section
[ 4.047] (II) intel(0): Enabled output HDMI2
[ 4.047] (--) intel(0): Using a maximum size of 256x256 for hardware
cursors
[ 4.047] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 4.047] (II) intel(0): Enabled output VIRTUAL1
[ 4.047] (--) intel(0): Output eDP1 using initial mode 1920x1080 on
pipe 0
[ 4.047] (==) intel(0): TearFree enabled
[ 4.047] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.047] (==) intel(0): DPI set to (96, 96)
[ 4.047] (II) Loading sub module "dri3"
[ 4.047] (II) LoadModule: "dri3"
[ 4.047] (II) Module "dri3" already built-in
[ 4.047] (II) Loading sub module "dri2"
[ 4.047] (II) LoadModule: "dri2"
[ 4.047] (II) Module "dri2" already built-in
[ 4.047] (II) Loading sub module "present"
[ 4.047] (II) LoadModule: "present"
[ 4.047] (II) Module "present" already built-in
[ 4.049] (II) intel(0): SNA initialized with Broadwell (gen8) backend
[ 4.049] (==) intel(0): Backing store enabled
[ 4.049] (==) intel(0): Silken mouse enabled
[ 4.050] (II) intel(0): HW Cursor enabled
[ 4.050] (==) intel(0): DPMS enabled
[ 4.050] (==) intel(0): Display hotplug detection enabled
[ 4.051] (II) intel(0): [DRI2] Setup complete
[ 4.051] (II) intel(0): [DRI2] DRI driver: i965
[ 4.051] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 4.051] (II) intel(0): direct rendering: DRI2 enabled
[ 4.051] (II) intel(0): hardware support for Present enabled
[ 4.051] (II) Initializing extension Generic Event Extension
[ 4.051] (II) Initializing extension SHAPE
[ 4.051] (II) Initializing extension MIT-SHM
[ 4.051] (II) Initializing extension XInputExtension
[ 4.051] (II) Initializing extension XTEST
[ 4.051] (II) Initializing extension BIG-REQUESTS
[ 4.051] (II) Initializing extension SYNC
[ 4.052] (II) Initializing extension XKEYBOARD
[ 4.052] (II) Initializing extension XC-MISC
[ 4.052] (II) Initializing extension SECURITY
[ 4.052] (II) Initializing extension XFIXES
[ 4.052] (II) Initializing extension RENDER
[ 4.052] (II) Initializing extension RANDR
[ 4.052] (II) Initializing extension COMPOSITE
[ 4.052] (II) Initializing extension DAMAGE
[ 4.052] (II) Initializing extension MIT-SCREEN-SAVER
[ 4.053] (II) Initializing extension DOUBLE-BUFFER
[ 4.053] (II) Initializing extension RECORD
[ 4.053] (II) Initializing extension DPMS
[ 4.053] (II) Initializing extension Present
[ 4.053] (II) Initializing extension DRI3
[ 4.053] (II) Initializing extension X-Resource
[ 4.053] (II) Initializing extension XVideo
[ 4.053] (II) Initializing extension XVideo-MotionCompensation
[ 4.053] (II) Initializing extension SELinux
[ 4.053] (II) SELinux: Disabled on system
[ 4.053] (II) Initializing extension GLX
[ 4.078] (II) AIGLX: Loaded and initialized i965
[ 4.078] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4.078] (II) Initializing extension XFree86-VidModeExtension
[ 4.078] (II) Initializing extension XFree86-DGA
[ 4.078] (II) Initializing extension XFree86-DRI
[ 4.078] (II) Initializing extension DRI2
[ 4.081] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using
pipe 0, position (0, 0), rotation normal, reflection none
[ 4.090] (II) intel(0): Setting screen physical size to 508 x 285
[ 4.139] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[ 4.139] (**) Power Button: Applying InputClass "libinput keyboard
catchall"
[ 4.139] (II) LoadModule: "libinput"
[ 4.139] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 4.144] (II) Module libinput: vendor="X.Org Foundation"
[ 4.144] compiled for 1.20.1, module version = 0.28.1
[ 4.144] Module class: X.Org XInput Driver
[ 4.144] ABI class: X.Org XInput driver, version 24.1
[ 4.144] (II) Using input driver 'libinput' for 'Power Button'
[ 4.144] (**) Power Button: always reports core events
[ 4.144] (**) Option "Device" "/dev/input/event3"
[ 4.144] (**) Option "_source" "server/udev"
[ 4.147] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 4.147] (II) event3 - Power Button: device is a keyboard
[ 4.147] (II) event3 - Power Button: device removed
[ 4.164] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event3"
[ 4.164] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[ 4.164] (**) Option "xkb_model" "pc105"
[ 4.164] (**) Option "xkb_layout" "us"
[ 4.165] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 4.165] (II) event3 - Power Button: device is a keyboard
[ 4.166] (II) config/udev: Adding input device Video Bus
(/dev/input/event13)
[ 4.166] (**) Video Bus: Applying InputClass "libinput keyboard
catchall"
[ 4.166] (II) Using input driver 'libinput' for 'Video Bus'
[ 4.166] (**) Video Bus: always reports core events
[ 4.166] (**) Option "Device" "/dev/input/event13"
[ 4.166] (**) Option "_source" "server/udev"
[ 4.167] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 4.167] (II) event13 - Video Bus: device is a keyboard
[ 4.167] (II) event13 - Video Bus: device removed
[ 4.200] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event13"
[ 4.200] (II) XINPUT: Adding extended input device "Video Bus"
(type: KEYBOARD, id 7)
[ 4.200] (**) Option "xkb_model" "pc105"
[ 4.200] (**) Option "xkb_layout" "us"
[ 4.203] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 4.203] (II) event13 - Video Bus: device is a keyboard
[ 4.204] (II) config/udev: Adding input device Lid Switch
(/dev/input/event1)
[ 4.204] (II) No input driver specified, ignoring this device.
[ 4.204] (II) This device may have been added with another device file.
[ 4.205] (II) config/udev: Adding input device Sleep Button
(/dev/input/event2)
[ 4.205] (**) Sleep Button: Applying InputClass "libinput keyboard
catchall"
[ 4.205] (II) Using input driver 'libinput' for 'Sleep Button'
[ 4.205] (**) Sleep Button: always reports core events
[ 4.205] (**) Option "Device" "/dev/input/event2"
[ 4.205] (**) Option "_source" "server/udev"
[ 4.206] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 4.206] (II) event2 - Sleep Button: device is a keyboard
[ 4.207] (II) event2 - Sleep Button: device removed
[ 4.228] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event2"
[ 4.228] (II) XINPUT: Adding extended input device "Sleep Button"
(type: KEYBOARD, id 8)
[ 4.228] (**) Option "xkb_model" "pc105"
[ 4.228] (**) Option "xkb_layout" "us"
[ 4.229] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 4.229] (II) event2 - Sleep Button: device is a keyboard
[ 4.230] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=3 (/dev/input/event14)
[ 4.231] (II) No input driver specified, ignoring this device.
[ 4.231] (II) This device may have been added with another device file.
[ 4.231] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=7 (/dev/input/event15)
[ 4.231] (II) No input driver specified, ignoring this device.
[ 4.231] (II) This device may have been added with another device file.
[ 4.231] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=8 (/dev/input/event16)
[ 4.231] (II) No input driver specified, ignoring this device.
[ 4.231] (II) This device may have been added with another device file.
[ 4.232] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=9 (/dev/input/event17)
[ 4.232] (II) No input driver specified, ignoring this device.
[ 4.232] (II) This device may have been added with another device file.
[ 4.232] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=10 (/dev/input/event18)
[ 4.232] (II) No input driver specified, ignoring this device.
[ 4.232] (II) This device may have been added with another device file.
[ 4.233] (II) config/udev: Adding input device Integrated Camera:
Integrated C (/dev/input/event7)
[ 4.233] (**) Integrated Camera: Integrated C: Applying InputClass
"libinput keyboard catchall"
[ 4.233] (II) Using input driver 'libinput' for 'Integrated Camera:
Integrated C'
[ 4.233] (**) Integrated Camera: Integrated C: always reports core
events
[ 4.233] (**) Option "Device" "/dev/input/event7"
[ 4.233] (**) Option "_source" "server/udev"
[ 4.235] (II) event7 - Integrated Camera: Integrated C: is tagged
by udev as: Keyboard
[ 4.235] (II) event7 - Integrated Camera: Integrated C: device is a
keyboard
[ 4.235] (II) event7 - Integrated Camera: Integrated C: device removed
[ 4.284] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input11/event7"
[ 4.284] (II) XINPUT: Adding extended input device "Integrated
Camera: Integrated C" (type: KEYBOARD, id 9)
[ 4.284] (**) Option "xkb_model" "pc105"
[ 4.284] (**) Option "xkb_layout" "us"
[ 4.287] (II) event7 - Integrated Camera: Integrated C: is tagged
by udev as: Keyboard
[ 4.287] (II) event7 - Integrated Camera: Integrated C: device is a
keyboard
[ 4.288] (II) config/udev: Adding input device HDA Digital PCBeep
(/dev/input/event8)
[ 4.288] (II) No input driver specified, ignoring this device.
[ 4.288] (II) This device may have been added with another device file.
[ 4.289] (II) config/udev: Adding input device HDA Intel PCH Dock
Mic (/dev/input/event9)
[ 4.289] (II) No input driver specified, ignoring this device.
[ 4.289] (II) This device may have been added with another device file.
[ 4.289] (II) config/udev: Adding input device HDA Intel PCH Mic
(/dev/input/event10)
[ 4.289] (II) No input driver specified, ignoring this device.
[ 4.289] (II) This device may have been added with another device file.
[ 4.290] (II) config/udev: Adding input device HDA Intel PCH Dock
Headphone (/dev/input/event11)
[ 4.290] (II) No input driver specified, ignoring this device.
[ 4.290] (II) This device may have been added with another device file.
[ 4.291] (II) config/udev: Adding input device HDA Intel PCH
Headphone (/dev/input/event12)
[ 4.291] (II) No input driver specified, ignoring this device.
[ 4.291] (II) This device may have been added with another device file.
[ 4.292] (II) config/udev: Adding input device AT Translated Set 2
keyboard (/dev/input/event0)
[ 4.292] (**) AT Translated Set 2 keyboard: Applying InputClass
"libinput keyboard catchall"
[ 4.292] (II) Using input driver 'libinput' for 'AT Translated Set 2
keyboard'
[ 4.292] (**) AT Translated Set 2 keyboard: always reports core events
[ 4.292] (**) Option "Device" "/dev/input/event0"
[ 4.292] (**) Option "_source" "server/udev"
[ 4.293] (II) event0 - AT Translated Set 2 keyboard: is tagged by
udev as: Keyboard
[ 4.293] (II) event0 - AT Translated Set 2 keyboard: device is a
keyboard
[ 4.293] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 4.316] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4.316] (II) XINPUT: Adding extended input device "AT Translated
Set 2 keyboard" (type: KEYBOARD, id 10)
[ 4.316] (**) Option "xkb_model" "pc105"
[ 4.316] (**) Option "xkb_layout" "us"
[ 4.318] (II) event0 - AT Translated Set 2 keyboard: is tagged by
udev as: Keyboard
[ 4.318] (II) event0 - AT Translated Set 2 keyboard: device is a
keyboard
[ 4.320] (II) config/udev: Adding input device PC Speaker
(/dev/input/event5)
[ 4.320] (II) No input driver specified, ignoring this device.
[ 4.320] (II) This device may have been added with another device file.
[ 4.321] (II) config/udev: Adding input device ThinkPad Extra
Buttons (/dev/input/event6)
[ 4.321] (**) ThinkPad Extra Buttons: Applying InputClass "libinput
keyboard catchall"
[ 4.321] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[ 4.321] (**) ThinkPad Extra Buttons: always reports core events
[ 4.321] (**) Option "Device" "/dev/input/event6"
[ 4.321] (**) Option "_source" "server/udev"
[ 4.323] (II) event6 - ThinkPad Extra Buttons: is tagged by udev
as: Keyboard Switch
[ 4.323] (II) event6 - ThinkPad Extra Buttons: device is a keyboard
[ 4.323] (II) event6 - ThinkPad Extra Buttons: device removed
[ 4.340] (**) Option "config_info"
"udev:/sys/devices/platform/thinkpad_acpi/input/input7/event6"
[ 4.340] (II) XINPUT: Adding extended input device "ThinkPad Extra
Buttons" (type: KEYBOARD, id 11)
[ 4.340] (**) Option "xkb_model" "pc105"
[ 4.340] (**) Option "xkb_layout" "us"
[ 4.342] (II) event6 - ThinkPad Extra Buttons: is tagged by udev
as: Keyboard Switch
[ 4.342] (II) event6 - ThinkPad Extra Buttons: device is a keyboard
[ 4.342] (II) config/udev: Adding input device Synaptics TM3053-003
(/dev/input/event4)
[ 4.342] (**) Synaptics TM3053-003: Applying InputClass "libinput
touchpad catchall"
[ 4.342] (**) Synaptics TM3053-003: Applying InputClass "touchpad
catchall"
[ 4.342] (**) Synaptics TM3053-003: Applying InputClass "Default
clickpad buttons"
[ 4.342] (II) LoadModule: "synaptics"
[ 4.343] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4.344] (II) Module synaptics: vendor="X.Org Foundation"
[ 4.344] compiled for 1.20.1, module version = 1.9.1
[ 4.344] Module class: X.Org XInput Driver
[ 4.344] ABI class: X.Org XInput driver, version 24.1
[ 4.344] (II) Using input driver 'synaptics' for 'Synaptics TM3053-003'
[ 4.344] (**) Synaptics TM3053-003: always reports core events
[ 4.344] (**) Option "Device" "/dev/input/event4"
[ 4.380] (II) synaptics: Synaptics TM3053-003: found clickpad property
[ 4.380] (--) synaptics: Synaptics TM3053-003: x-axis range 0 - 1940
(res 20)
[ 4.380] (--) synaptics: Synaptics TM3053-003: y-axis range 0 - 1062
(res 20)
[ 4.380] (--) synaptics: Synaptics TM3053-003: pressure range 0 - 255
[ 4.380] (II) synaptics: Synaptics TM3053-003: device does not
report finger width.
[ 4.380] (--) synaptics: Synaptics TM3053-003: buttons: left double
triple
[ 4.381] (--) synaptics: Synaptics TM3053-003: Vendor 0x6cb Product 0
[ 4.381] (--) synaptics: Synaptics TM3053-003: invalid finger width
range. defaulting to 0 - 15
[ 4.381] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 4.381] (--) synaptics: Synaptics TM3053-003: touchpad found
[ 4.381] (**) Synaptics TM3053-003: always reports core events
[ 4.412] (**) Option "config_info"
"udev:/sys/devices/rmi4-00/input/input3/event4"
[ 4.412] (II) XINPUT: Adding extended input device "Synaptics
TM3053-003" (type: TOUCHPAD, id 12)
[ 4.412] (**) synaptics: Synaptics TM3053-003: (accel) MinSpeed is
now constant deceleration 2.5
[ 4.412] (**) synaptics: Synaptics TM3053-003: (accel) MaxSpeed is
now 1.75
[ 4.412] (**) synaptics: Synaptics TM3053-003: (accel) AccelFactor
is now 0.090
[ 4.413] (**) Synaptics TM3053-003: (accel) keeping acceleration
scheme 1
[ 4.413] (**) Synaptics TM3053-003: (accel) acceleration profile 1
[ 4.413] (**) Synaptics TM3053-003: (accel) acceleration factor: 2.000
[ 4.413] (**) Synaptics TM3053-003: (accel) acceleration threshold: 4
[ 4.413] (--) synaptics: Synaptics TM3053-003: touchpad found
[ 4.414] (II) config/udev: Adding input device Synaptics TM3053-003
(/dev/input/mouse0)
[ 4.414] (**) Synaptics TM3053-003: Ignoring device from InputClass
"touchpad ignore duplicates"
[ 4.415] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint
(/dev/input/event19)
[ 4.415] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput
pointer catchall"
[ 4.415] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[ 4.415] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 4.415] (**) Option "Device" "/dev/input/event19"
[ 4.415] (**) Option "_source" "server/udev"
[ 4.417] (II) event19 - TPPS/2 IBM TrackPoint: is tagged by udev as:
Mouse Pointingstick
[ 4.417] (II) event19 - TPPS/2 IBM TrackPoint: device is a pointer
[ 4.419] (II) event19 - TPPS/2 IBM TrackPoint: device removed
[ 4.460] (**) Option "config_info"
"udev:/sys/devices/rmi4-00/rmi4-00.fn03/serio2/input/input8/event19"
[ 4.460] (II) XINPUT: Adding extended input device "TPPS/2 IBM
TrackPoint" (type: MOUSE, id 13)
[ 4.461] (**) Option "AccelerationScheme" "none"
[ 4.461] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[ 4.461] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 4.461] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 4.463] (II) event19 - TPPS/2 IBM TrackPoint: is tagged by udev as:
Mouse Pointingstick
[ 4.463] (II) event19 - TPPS/2 IBM TrackPoint: device is a pointer
[ 4.466] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint
(/dev/input/mouse1)
[ 4.466] (II) No input driver specified, ignoring this device.
[ 4.466] (II) This device may have been added with another device file.
[ 6.048] (II) intel(0): EDID vendor "CMN", prod id 5571
[ 6.048] (II) intel(0): Printing DDC gathered Modelines:
[ 6.049] (II) intel(0): Modeline "1920x1080"x0.0 136.62 1920 1964
1992 2070 1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)
Debian Bug Tracking System
Feb 12, 2019, 4:10:02 AM2/12/19
to
Your message dated Tue, 12 Feb 2019 09:07:11 +0000
with message-id <E1gtU23-...@fasolo.debian.org>
and subject line Bug#875621: fixed in linux 4.19.20-1
has caused the Debian Bug report #875621,
regarding linux: ThinkPad X270 Synaptics touchpad: please enable CONFIG_RMI4_SMB
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
875621: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=875621
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
with message-id <E1gtU23-...@fasolo.debian.org>
and subject line Bug#875621: fixed in linux 4.19.20-1
has caused the Debian Bug report #875621,
regarding linux: ThinkPad X270 Synaptics touchpad: please enable CONFIG_RMI4_SMB
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
875621: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=875621
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
0 new messages