Bug#968188: linux-image-5.7.0-2-arm64: 4K display resolution is not recognized with Raspberry Pi 4B
Ryutaroh Matsumoto
Version: 5.7.10-1
Severity: important
Dear Maintainer,
My display has 3840x2160 resulution.
The kernel from Raspberry Pi Foundation can use 3840x2160.
But the debian kernel can only use 1920×1280.
By the lack of DRM reported at
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=968181
I can only use fbdev_backend in weston/wayland and
xserver-xorg-video-fbdev.
They only recognize 1920×1280. Relevant Debian kernel log is
[ 0.920977] simple-framebuffer 3e267000.framebuffer: framebuffer at 0x3e267000, 0x960000 bytes, mapped to 0x(____ptrval____)
[ 0.921003] simple-framebuffer 3e267000.framebuffer: format=a8r8g8b8, mode=1920x1280x32, linelength=7680
[ 0.946638] Console: switching to colour frame buffer device 240x80
[ 0.971786] simple-framebuffer 3e267000.framebuffer: fb0: simplefb registered!
Best regards, Ryutaroh Matsumoto
-- Package-specific info:
** Version:
Linux version 5.7.0-2-arm64 (debian...@lists.debian.org) (gcc version 9.3.0 (Debian 9.3.0-15), GNU ld (GNU Binutils for Debian) 2.35) #1 SMP Debian 5.7.10-1 (2020-07-26)
** Command line:
video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x71f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw elevator=bfq fsck.repair=yes net.ifnames=0 rootwait systemd.unified_cgroup_hierarchy=1
** Tainted: C (1024)
* staging driver was loaded
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
dmesg output is below:
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.7.0-2-arm64 (debian...@lists.debian.org) (gcc version 9.3.0 (Debian 9.3.0-15), GNU ld (GNU Binutils for Debian) 2.35) #1 SMP Debian 5.7.10-1 (2020-07-26)
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000029000000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x1ff0730c0-0x1ff074fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] On node 0 totalpages: 2015232
[ 0.000000] DMA zone: 3072 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:63
[ 0.000000] DMA32 zone: 12288 pages used for memmap
[ 0.000000] DMA32 zone: 770048 pages, LIFO batch:63
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:63
[ 0.000000] percpu: Embedded 32 pages/cpu s93720 r8192 d29160 u131072
[ 0.000000] pcpu-alloc: s93720 r8192 d29160 u131072 alloc=32*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: EL2 vector hardening
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[ 0.000000] CPU features: detected: ARM erratum 1319367
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1983488
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x71f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw elevator=bfq fsck.repair=yes net.ifnames=0 rootwait systemd.unified_cgroup_hierarchy=1
[ 0.000000] Kernel parameter elevator= does not have any effect anymore.
Please use sysfs to set IO scheduler for individual devices.
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x25000000-0x29000000] (64MB)
[ 0.000000] Memory: 4732836K/8060928K available (10684K kernel code, 1848K rwdata, 3808K rodata, 5184K init, 561K bss, 277044K reserved, 65536K cma-reserved)
[ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x48/0x5d0 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 36810 entries in 144 pages
[ 0.000000] ftrace: allocated 144 pages with 2 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000174] Console: colour dummy device 80x25
[ 0.000584] printk: console [tty0] enabled
[ 0.000718] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000742] pid_max: default: 32768 minimum: 301
[ 0.000904] LSM: Security Framework initializing
[ 0.000944] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.001036] AppArmor: AppArmor initialized
[ 0.001054] TOMOYO Linux initialized
[ 0.001226] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.001332] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.003385] rcu: Hierarchical SRCU implementation.
[ 0.005817] EFI services will not be available.
[ 0.006381] smp: Bringing up secondary CPUs ...
[ 0.007019] Detected PIPT I-cache on CPU1
[ 0.007084] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.007812] Detected PIPT I-cache on CPU2
[ 0.007851] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.008548] Detected PIPT I-cache on CPU3
[ 0.008588] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.008691] smp: Brought up 1 node, 4 CPUs
[ 0.008753] SMP: Total of 4 processors activated.
[ 0.008767] CPU features: detected: 32-bit EL0 Support
[ 0.008781] CPU features: detected: CRC32 instructions
[ 0.032573] CPU: All CPU(s) started at EL2
[ 0.032666] alternatives: patching kernel code
[ 0.173154] node 0 initialised, 746378 pages in 140ms
[ 0.175353] devtmpfs: initialized
[ 0.181491] Registered cp15_barrier emulation handler
[ 0.181524] Registered setend emulation handler
[ 0.181542] KASLR enabled
[ 0.181931] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.181963] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.184019] pinctrl core: initialized pinctrl subsystem
[ 0.184959] thermal_sys: Registered thermal governor 'fair_share'
[ 0.184964] thermal_sys: Registered thermal governor 'step_wise'
[ 0.185194] DMI not present or invalid.
[ 0.185842] NET: Registered protocol family 16
[ 0.187447] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.187469] audit: initializing netlink subsys (disabled)
[ 0.187702] audit: type=2000 audit(0.184:1): state=initialized audit_enabled=0 res=1
[ 0.188893] cpuidle: using governor ladder
[ 0.188931] cpuidle: using governor menu
[ 0.189221] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.189338] ASID allocator initialised with 32768 entries
[ 0.189667] Serial: AMBA PL011 UART driver
[ 0.205267] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.205295] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.205310] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.205324] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.855083] ACPI: Interpreter disabled.
[ 0.855352] iommu: Default domain type: Translated
[ 0.855625] vgaarb: loaded
[ 0.855950] EDAC MC: Ver: 3.0.0
[ 0.857244] NetLabel: Initializing
[ 0.857262] NetLabel: domain hash size = 128
[ 0.857273] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.857339] NetLabel: unlabeled traffic allowed by default
[ 0.857856] clocksource: Switched to clocksource arch_sys_counter
[ 0.919179] VFS: Disk quotas dquot_6.6.0
[ 0.919268] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.920030] AppArmor: AppArmor Filesystem Enabled
[ 0.920977] simple-framebuffer 3e267000.framebuffer: framebuffer at 0x3e267000, 0x960000 bytes, mapped to 0x(____ptrval____)
[ 0.921003] simple-framebuffer 3e267000.framebuffer: format=a8r8g8b8, mode=1920x1280x32, linelength=7680
[ 0.946638] Console: switching to colour frame buffer device 240x80
[ 0.971786] simple-framebuffer 3e267000.framebuffer: fb0: simplefb registered!
[ 0.971987] pnp: PnP ACPI: disabled
[ 0.980344] NET: Registered protocol family 2
[ 0.981055] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.981263] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.981764] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.982709] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.983125] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.983342] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.983789] NET: Registered protocol family 1
[ 0.983897] NET: Registered protocol family 44
[ 0.983986] PCI: CLS 0 bytes, default 64
[ 0.984284] Trying to unpack rootfs image as initramfs...
[ 3.074257] Freeing initrd memory: 29136K
[ 3.075619] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 3.076021] kvm [1]: IPA Size Limit: 44bits
[ 3.076824] kvm [1]: vgic interrupt IRQ1
[ 3.077064] kvm [1]: Hyp mode initialized successfully
[ 3.078842] Initialise system trusted keyrings
[ 3.078971] Key type blacklist registered
[ 3.079282] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[ 3.085749] zbud: loaded
[ 3.086577] integrity: Platform Keyring initialized
[ 3.086677] Key type asymmetric registered
[ 3.086753] Asymmetric key parser 'x509' registered
[ 3.086872] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 3.087273] io scheduler mq-deadline registered
[ 3.093008] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.093718] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 3.093883] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 3.094058] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
[ 3.094217] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000
[ 3.159936] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 3.160250] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 3.160367] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.160470] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 3.160668] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 3.160859] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 3.163286] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 3.163542] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 3.163681] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 3.163901] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 3.175946] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 3.176089] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff]
[ 3.176219] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 3.176359] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 3.176451] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 3.176725] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 3.176970] pcieport 0000:00:00.0: PME: Signaling with IRQ 40
[ 3.177398] pcieport 0000:00:00.0: AER: enabled with IRQ 40
[ 3.177673] pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 8.642324] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
[ 8.642525] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x890 took 5336754 usecs
[ 8.651081] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 8.653068] printk: console [ttyS1] disabled
[ 8.659090] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 18, base_baud = 66805845) is a 16550
[ 10.781603] printk: console [ttyS1] enabled
[ 10.796911] Serial: AMBA driver
[ 10.809476] msm_serial: driver initialized
[ 10.824629] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 10.843717] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 10.865161] mousedev: PS/2 mouse device common for all mice
[ 10.884490] ledtrig-cpu: registered to indicate activity on CPUs
[ 10.903428] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 10.922421] NET: Registered protocol family 10
[ 10.975522] Segment Routing with IPv6
[ 10.989305] mip6: Mobile IPv6
[ 11.001497] NET: Registered protocol family 17
[ 11.016859] mpls_gso: MPLS GSO support
[ 11.031279] registered taskstats version 1
[ 11.045783] Loading compiled-in X.509 certificates
[ 11.210280] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 11.234290] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[ 11.254609] zswap: loaded using pool lzo/zbud
[ 11.270210] Key type ._fscrypt registered
[ 11.284518] Key type .fscrypt registered
[ 11.298553] Key type fscrypt-provisioning registered
[ 11.314853] AppArmor: AppArmor sha1 policy hashing enabled
[ 11.336800] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 16, base_baud = 0) is a PL011 rev2
[ 11.361165] serial serial0: tty port ttyAMA0 registered
[ 11.379716] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-06-01 13:23
[ 11.403145] raspberrypi-clk raspberrypi-clk: CPU frequency range: min 600000000, max 1500000000
[ 11.444383] Freeing unused kernel memory: 5184K
[ 11.569596] Checked W+X mappings: passed, no W+X pages found
[ 11.587215] Run /init as init process
[ 11.600663] with arguments:
[ 11.600667] /init
[ 11.600672] with environment:
[ 11.600676] HOME=/
[ 11.600680] TERM=linux
[ 11.914406] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 11.950923] sdhci: Secure Digital Host Controller Interface driver
[ 11.969763] sdhci: Copyright(c) Pierre Ossman
[ 11.990578] libphy: Fixed MDIO Bus: probed
[ 12.026850] sdhci-pltfm: SDHCI platform and OF driver helper
[ 12.048186] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 12.051062] usbcore: registered new interface driver usbfs
[ 12.066977] sdhci-iproc fe300000.sdhci: allocated mmc-pwrseq
[ 12.084334] usbcore: registered new interface driver hub
[ 12.118385] usbcore: registered new device driver usb
[ 12.129879] libphy: bcmgenet MII bus: probed
[ 12.138013] mmc0: SDHCI controller on fe300000.sdhci [fe300000.sdhci] using PIO
[ 12.179186] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 12.187483] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[ 12.196202] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 12.213332] mmc1: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[ 12.215696] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 12.217404] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 12.220438] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 12.222128] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 12.240683] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator
[ 12.345390] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator
[ 12.369999] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 12.380968] random: fast init done
[ 12.410921] mmc0: new high speed SDIO card at address 0001
[ 12.467952] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM
[ 12.500729] mmc1: new ultra high speed DDR50 SDHC card at address 5048
[ 12.520947] mmcblk1: mmc1:5048 SD32G 28.9 GiB
[ 12.538734] mmcblk1: p1 p2
[ 22.234559] xhci_hcd 0000:01:00.0: can't setup: -110
[ 22.250678] xhci_hcd 0000:01:00.0: USB bus 1 deregistered
[ 22.267623] xhci_hcd 0000:01:00.0: init 0000:01:00.0 fail, -110
[ 22.285557] xhci_hcd: probe of 0000:01:00.0 failed with error -110
[ 22.332017] io scheduler bfq registered
[ 22.433873] raid6: neonx8 gen() 1754 MB/s
[ 22.513854] raid6: neonx8 xor() 1306 MB/s
[ 22.593860] raid6: neonx4 gen() 1807 MB/s
[ 22.673848] raid6: neonx4 xor() 1383 MB/s
[ 22.753851] raid6: neonx2 gen() 1575 MB/s
[ 22.833856] raid6: neonx2 xor() 1225 MB/s
[ 22.913851] raid6: neonx1 gen() 1175 MB/s
[ 22.993847] raid6: neonx1 xor() 959 MB/s
[ 23.073848] raid6: int64x8 gen() 1028 MB/s
[ 23.153852] raid6: int64x8 xor() 590 MB/s
[ 23.233870] raid6: int64x4 gen() 1007 MB/s
[ 23.313846] raid6: int64x4 xor() 591 MB/s
[ 23.393850] raid6: int64x2 gen() 922 MB/s
[ 23.473863] raid6: int64x2 xor() 524 MB/s
[ 23.553856] raid6: int64x1 gen() 723 MB/s
[ 23.633861] raid6: int64x1 xor() 390 MB/s
[ 23.647565] raid6: using algorithm neonx4 gen() 1807 MB/s
[ 23.663533] raid6: .... xor() 1383 MB/s, rmw enabled
[ 23.678615] raid6: using neon recovery algorithm
[ 23.717995] xor: measuring software checksum speed
[ 23.769849] 8regs : 2391.000 MB/sec
[ 23.821849] 32regs : 2737.000 MB/sec
[ 23.873849] arm64_neon: 2502.000 MB/sec
[ 23.887157] xor: using function: 32regs (2737.000 MB/sec)
[ 24.130570] Btrfs loaded, crc32c=crc32c-generic
[ 24.450535] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[ 24.669958] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 25.102527] systemd[1]: System time before build time, advancing clock.
[ 25.177322] systemd[1]: Inserted module 'autofs4'
[ 25.236755] systemd[1]: systemd 246-2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 25.292986] systemd[1]: Detected architecture arm64.
[ 25.335294] systemd[1]: Set hostname to <rpi4-20200805>.
[ 25.887446] systemd[1]: /lib/systemd/system/lxc.service:17: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 25.931445] systemd[1]: /lib/systemd/system/lxc.service:18: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 26.009007] systemd[1]: tmp.mount: Cannot add dependency job, ignoring: Unit tmp.mount not found.
[ 26.033363] systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service not found.
[ 26.063961] systemd[1]: Queued start job for default target Graphical Interface.
[ 26.085942] random: systemd: uninitialized urandom read (16 bytes read)
[ 26.128175] systemd[1]: Created slice system-getty.slice.
[ 26.166068] random: systemd: uninitialized urandom read (16 bytes read)
[ 26.204251] systemd[1]: Created slice system-modprobe.slice.
[ 26.242029] random: systemd: uninitialized urandom read (16 bytes read)
[ 26.276591] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 26.320644] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 26.380134] systemd[1]: Created slice system-wpa_supplicant.slice.
[ 26.424407] systemd[1]: Created slice User and Session Slice.
[ 26.462539] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 26.510280] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 26.559159] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 26.610218] systemd[1]: Reached target Local Encrypted Volumes.
[ 26.650132] systemd[1]: Reached target Paths.
[ 26.682066] systemd[1]: Reached target Remote File Systems.
[ 26.722047] systemd[1]: Reached target Slices.
[ 26.754080] systemd[1]: Reached target Swap.
[ 26.786903] systemd[1]: Listening on Syslog Socket.
[ 26.822653] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 26.866305] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 26.910854] systemd[1]: Listening on Journal Audit Socket.
[ 26.950566] systemd[1]: Listening on Journal Socket (/dev/log).
[ 26.990610] systemd[1]: Listening on Journal Socket.
[ 27.026791] systemd[1]: Listening on Network Service Netlink Socket.
[ 27.070745] systemd[1]: Listening on udev Control Socket.
[ 27.110487] systemd[1]: Listening on udev Kernel Socket.
[ 27.170767] systemd[1]: Mounting Huge Pages File System...
[ 27.211835] systemd[1]: Mounting POSIX Message Queue File System...
[ 27.256355] systemd[1]: Mounting Kernel Debug File System...
[ 27.314390] systemd[1]: Mounting Kernel Trace File System...
[ 27.355718] systemd[1]: Starting Set the console keyboard layout...
[ 27.400754] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 27.466717] systemd[1]: Starting Load Kernel Module drm...
[ 27.509736] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 27.534062] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 27.617437] systemd[1]: Starting Journal Service...
[ 27.667138] systemd[1]: Starting Load Kernel Modules...
[ 27.708182] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 27.756761] EXT4-fs (mmcblk1p2): re-mounted. Opts: discard
[ 27.792088] systemd[1]: Starting Coldplug All udev Devices...
[ 27.864790] systemd[1]: Mounted Huge Pages File System.
[ 27.902798] systemd[1]: Mounted POSIX Message Queue File System.
[ 27.942764] systemd[1]: Mounted Kernel Debug File System.
[ 27.982959] systemd[1]: Mounted Kernel Trace File System.
[ 28.023994] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 28.079146] systemd[1]: modp...@drm.service: Succeeded.
[ 28.097062] systemd[1]: Finished Load Kernel Module drm.
[ 28.136109] systemd[1]: Finished Load Kernel Modules.
[ 28.183893] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 28.235815] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 28.259302] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 28.286144] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 28.309758] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 28.342362] systemd[1]: Starting Load/Save Random Seed...
[ 28.423530] systemd[1]: Starting Apply Kernel Variables...
[ 28.469586] systemd[1]: Starting Create System Users...
[ 28.508762] systemd[1]: Finished Coldplug All udev Devices.
[ 28.568022] systemd[1]: Finished Apply Kernel Variables.
[ 28.622226] systemd[1]: Started Journal Service.
[ 29.890560] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 29.949349] iproc-rng200 fe104000.rng: hwrng registered
[ 30.062162] vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 30.093977] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 30.174779] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 30.198039] cfg80211: Loaded X.509 cert 'be...@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 30.236325] cfg80211: Loaded X.509 cert 'romain...@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 30.265218] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 30.289959] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 30.319645] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 30.448841] Bluetooth: Core ver 2.22
[ 30.462797] NET: Registered protocol family 31
[ 30.478081] Bluetooth: HCI device and connection manager initialized
[ 30.497123] Bluetooth: HCI socket layer initialized
[ 30.515858] Bluetooth: L2CAP socket layer initialized
[ 30.599261] Bluetooth: SCO socket layer initialized
[ 30.606399] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 30.645722] usbcore: registered new interface driver brcmfmac
[ 30.694535] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.bin
[ 30.735320] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt
[ 30.779365] random: crng init done
[ 30.788728] random: 7 urandom warning(s) missed due to ratelimiting
[ 30.858470] mc: Linux media interface: v0.10
[ 30.901881] Bluetooth: HCI UART driver ver 2.3
[ 30.913342] Bluetooth: HCI UART protocol H4 registered
[ 30.914267] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 30.925679] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 30.927852] Bluetooth: HCI UART protocol LL registered
[ 30.947600] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43455-sdio.clm_blob (-2)
[ 30.951055] videodev: Linux video capture interface: v2.00
[ 30.968354] Bluetooth: HCI UART protocol ATH3K registered
[ 30.968478] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 30.981917] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 30.982051] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 31.002799] Bluetooth: HCI UART protocol Intel registered
[ 31.017943] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 31.030458] Bluetooth: HCI UART protocol Broadcom registered
[ 31.047931] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
[ 31.048071] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 31.048137] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 31.069690] Bluetooth: HCI UART protocol QCA registered
[ 31.166054] uart-pl011 fe201000.serial: no DMA platform data
[ 31.182884] Bluetooth: HCI UART protocol AG6XX registered
[ 31.182976] Bluetooth: HCI UART protocol Marvell registered
[ 31.209448] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 31.438510] Bluetooth: hci0: BCM: chip id 107
[ 31.451366] Bluetooth: hci0: BCM: features 0x2f
[ 31.466280] Bluetooth: hci0: BCM4345C0
[ 31.476762] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 31.491598] bluetooth hci0: firmware: failed to load brcm/BCM4345C0.hcd (-2)
[ 31.509987] bluetooth hci0: Direct firmware load for brcm/BCM4345C0.hcd failed with error -2
[ 31.529969] Bluetooth: hci0: BCM: Patch brcm/BCM4345C0.hcd not found
[ 31.780299] audit: type=1400 audit(1596440793.671:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=393 comm="apparmor_parser"
[ 31.815952] audit: type=1400 audit(1596440793.671:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=398 comm="apparmor_parser"
[ 31.850262] audit: type=1400 audit(1596440793.671:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=396 comm="apparmor_parser"
[ 31.885490] audit: type=1400 audit(1596440793.671:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=396 comm="apparmor_parser"
[ 31.920499] audit: type=1400 audit(1596440793.671:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=400 comm="apparmor_parser"
[ 31.953898] audit: type=1400 audit(1596440793.671:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=400 comm="apparmor_parser"
[ 31.986923] audit: type=1400 audit(1596440793.671:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=400 comm="apparmor_parser"
[ 32.019775] audit: type=1400 audit(1596440793.711:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=395 comm="apparmor_parser"
[ 32.054839] audit: type=1400 audit(1596440793.711:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=395 comm="apparmor_parser"
[ 32.090932] audit: type=1400 audit(1596440793.711:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=395 comm="apparmor_parser"
[ 33.429351] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 33.495290] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.510228] Bluetooth: BNEP filters: protocol multicast
[ 33.525519] Bluetooth: BNEP socket layer initialized
[ 33.555398] NET: Registered protocol family 38
[ 38.967931] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1410.920377] systemd-xdg-autostart-generator[541]: Not generating service for XDG autostart app-xdg\x2duser\x2ddirs-autostart.service, startup phases are not supported.
[ 1423.305481] systemd-xdg-autostart-generator[576]: Not generating service for XDG autostart app-xdg\x2duser\x2ddirs-autostart.service, startup phases are not supported.
** Model information
Device Tree model: Raspberry Pi 4 Model B Rev 1.4
** Loaded modules:
cmac
algif_hash
xt_CHECKSUM
nft_chain_nat
xt_MASQUERADE
nf_nat
nf_conntrack
nf_defrag_ipv6
algif_skcipher
nf_defrag_ipv4
af_alg
nft_counter
bnep
xt_tcpudp
nft_compat
bridge
stp
llc
nf_tables
nfnetlink
nls_ascii
nls_cp437
vfat
fat
bcm2835_v4l2(C)
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
snd_bcm2835(C)
videobuf2_common
snd_pcm
videodev
btsdio
snd_timer
snd
brcmfmac
mc
soundcore
hci_uart
brcmutil
btqca
btrtl
btbcm
btintel
bluetooth
cpufreq_dt
cfg80211
vchiq(C)
raspberrypi_cpufreq
bcm2711_thermal
jitterentropy_rng
drbg
bcm2835_wdt
ansi_cprng
iproc_rng200
ecdh_generic
pwm_bcm2835
ecc
rng_core
rfkill
leds_gpio
drm
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
btrfs
blake2b_generic
xor
xor_neon
zstd_decompress
zstd_compress
raid6_pq
libcrc32c
crc32c_generic
bfq
xhci_pci
xhci_hcd
dwc2
broadcom
udc_core
bcm_phy_lib
mdio_bcm_unimac
usbcore
genet
of_mdio
sdhci_iproc
sdhci_pltfm
i2c_bcm2835
usb_common
fixed_phy
sdhci
libphy
gpio_regulator
phy_generic
** Network interface configuration:
*** /etc/network/interfaces:
source-directory /etc/network/interfaces.d
*** /etc/network/interfaces.d/eth0:
auto eth0
iface eth0 inet dhcp
*** /etc/network/interfaces.d/wlan0:
auto wlan0
iface wlan0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether dc:a6:32:bb:99:d9 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether dc:a6:32:bb:99:da brd ff:ff:ff:ff:ff:ff
inet 192.168.1.9/24 brd 192.168.1.255 scope global wlan0
valid_lft forever preferred_lft forever
inet6 2400:4050:2ba1:ac00:dea6:32ff:febb:99da/64 scope global dynamic mngtmpaddr noprefixroute
valid_lft 14295sec preferred_lft 12495sec
inet6 fe80::dea6:32ff:febb:99da/64 scope link
valid_lft forever preferred_lft forever
4: lxcbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
link/ether 00:16:3e:00:00:00 brd ff:ff:ff:ff:ff:ff
inet 10.0.3.1/24 scope global lxcbr0
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 200 4 0 0 0 0 0 0 200 4 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 31475 339 0 0 0 0 0 2 47373 269 0 0 0 0 0 0
lxcbr0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
** PCI devices:
00:00.0 PCI bridge [0604]: Broadcom Inc. and subsidiaries Device [14e4:2711] (rev 10) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00000000-00000fff [size=4K]
Memory behind bridge: f8000000-f80fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [ac] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <2us
ClockPM+ Surprise- LLActRep- BwNot+ ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+
RootCap: CRSVisible+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Via WAKE#, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd-
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ OBFF Disabled, ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS+
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported, DRS-
DownstreamComp: Link Down - Not Determined
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
RootCmd: CERptEn+ NFERptEn+ FERptEn+
RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
Capabilities: [180 v1] Vendor Specific Information: ID=0000 Rev=0 Len=028 <?>
Capabilities: [240 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=8us PortTPowerOnTime=10us
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
T_CommonMode=1us LTR1.2_Threshold=0ns
L1SubCtl2: T_PwrOn=10us
Kernel driver in use: pcieport
01:00.0 USB controller [0c03]: VIA Technologies, Inc. VL805 USB 3.0 Host Controller [1106:3483] (rev 01) (prog-if 30 [XHCI])
Subsystem: VIA Technologies, Inc. VL805 USB 3.0 Host Controller [1106:3483]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 40
Region 0: Memory at 600000000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable- Count=1/4 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [c4] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <16us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR-
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
AtomicOpsCtl: ReqEn-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis+
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Kernel modules: xhci_pci
** USB devices:
not available
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'stable-updates'), (500, 'stable'), (1, 'experimental')
Architecture: arm64 (aarch64)
Kernel: Linux 5.7.0-2-arm64 (SMP w/4 CPU threads)
Kernel taint flags: TAINT_CRAP
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.7.0-2-arm64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.137
ii kmod 27+20200310-2
ii linux-base 4.6
Versions of packages linux-image-5.7.0-2-arm64 recommends:
ii apparmor 2.13.4-3
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.7.0-2-arm64 suggests:
pn debian-kernel-handbook <none>
pn linux-doc-5.7 <none>
Versions of packages linux-image-5.7.0-2-arm64 is related to:
ii firmware-amd-graphics 20200619-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 20200619-1
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20200619-1
ii firmware-misc-nonfree 20200619-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Ryutaroh Matsumoto
I compiled the upstream kernel 5.10.8 and it can use 4K resolution. Ryutaroh
Debian Bug Tracking System
> tags -1 + fixed-upstream
Bug #968188 [src:linux] linux-image-5.7.0-2-arm64: 4K display resolution is not recognized with Raspberry Pi 4B
Added tag(s) fixed-upstream.
--
968188: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=968188
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
Debian Bug Tracking System
> close 968181 5.10.5-1
Bug #968181 {Done: Ryutaroh Matsumoto <ryut...@ict.e.titech.ac.jp>} [src:linux] missing DRI/DRM support on Raspberry Pi
Ignoring request to alter fixed versions of bug #968181 to the same values previously set
Bug #968181 {Done: Ryutaroh Matsumoto <ryut...@ict.e.titech.ac.jp>} [src:linux] missing DRI/DRM support on Raspberry Pi
Bug 968181 is already marked as done; not doing anything.
> close 968188 5.10.5-1
Bug #968188 {Done: Ryutaroh Matsumoto <ryut...@ict.e.titech.ac.jp>} [src:linux] linux-image-5.7.0-2-arm64: 4K display resolution is not recognized with Raspberry Pi 4B
Ignoring request to alter fixed versions of bug #968188 to the same values previously set
Bug #968188 {Done: Ryutaroh Matsumoto <ryut...@ict.e.titech.ac.jp>} [src:linux] linux-image-5.7.0-2-arm64: 4K display resolution is not recognized with Raspberry Pi 4B
Bug 968188 is already marked as done; not doing anything.
--
968181: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=968181
Debian Bug Tracking System
> reopen 968181
Bug #968181 [src:linux] missing DRI/DRM support on Raspberry Pi
Bug 968181 is not marked as done; doing nothing.
> reopen 968188
Bug #968188 [src:linux] linux-image-5.7.0-2-arm64: 4K display resolution is not recognized with Raspberry Pi 4B
Bug 968188 is not marked as done; doing nothing.
> found 968181 5.10.9-1
Bug #968181 [src:linux] missing DRI/DRM support on Raspberry Pi
Ignoring request to alter found versions of bug #968181 to the same values previously set
> found 968188 5.10.9-1
Bug #968188 [src:linux] linux-image-5.7.0-2-arm64: 4K display resolution is not recognized with Raspberry Pi 4B
Ignoring request to alter found versions of bug #968188 to the same values previously set
Debian Bug Tracking System
with message-id <E1l67o9-...@fasolo.debian.org>
and subject line Bug#968188: fixed in linux 5.10.12-1
has caused the Debian Bug report #968188,
regarding linux-image-5.7.0-2-arm64: 4K display resolution is not recognized with Raspberry Pi 4B
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--