Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Bug#656724: linux-image-3.2.0-1-amd64: After installing this kernel syslogd reports a call trace always the same: Code: c0 89 c5 ...

0 views
Skip to first unread message

Antonio-M. Corbi Bellot

unread,
Jan 21, 2012, 5:40:02 AM1/21/12
to
Package: linux-2.6
Version: 3.2.1-1
Severity: normal

Dear Maintainer,

After installing this kernel I repeatedly get this kind of messages on any terminal I use:

Message from syslogd@pbell-acb at Jan 21 11:31:32 ...
kernel:[ 1039.072638] Code: c0 89 c5 74 04 80 63 1c fb 48 83 c4 38 89 e8 5b 5d 41 5c 41 5d c3 90 0f 09 66 66 90 66 90 c3 fa 66 66 90 66 66 90 c3 fb 66 66 90 <66> 66 90 c3 48 8b 15 2d f1 56 e1 48 8d 42 fd 48 83 f8 01 0f 96

A more detailed explanation of the failure is in the log attached.

A. Corbi

-- Package-specific info:
** Version:
Linux version 3.2.0-1-amd64 (Debian 3.2.1-1) (b...@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-11) ) #1 SMP Thu Jan 19 09:46:46 UTC 2012

** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-1-amd64 root=/dev/mapper/acb--laptop-root ro quiet splash pcie_aspm=force

** Not tainted

** Kernel log:
[ 779.104584] [<ffffffffa01c2020>] ? acpi_idle_enter_simple+0xc6/0x102 [processor]
[ 779.104602] [<ffffffff812633c3>] ? cpuidle_idle_call+0xec/0x179
[ 779.104613] [<ffffffff8100d255>] ? cpu_idle+0xa1/0xe8
[ 779.104623] [<ffffffff810706b6>] ? arch_local_irq_restore+0x2/0x8
[ 779.104633] [<ffffffff81332861>] ? start_secondary+0x1d5/0x1db
[ 779.104638] Code: c0 89 c5 74 04 80 63 1c fb 48 83 c4 38 89 e8 5b 5d 41 5c 41 5d c3 90 0f 09 66 66 90 66 90 c3 fa 66 66 90 66 66 90 c3 fb 66 66 90 <66> 66 90 c3 48 8b 15 2d f1 56 e1 48 8d 42 fd 48 83 f8 01 0f 96
[ 779.104732] Call Trace:
[ 779.104746] [<ffffffffa01c2020>] ? acpi_idle_enter_simple+0xc6/0x102 [processor]
[ 779.104759] [<ffffffff812633c3>] ? cpuidle_idle_call+0xec/0x179
[ 779.104769] [<ffffffff8100d255>] ? cpu_idle+0xa1/0xe8
[ 779.104776] [<ffffffff810706b6>] ? arch_local_irq_restore+0x2/0x8
[ 779.104785] [<ffffffff81332861>] ? start_secondary+0x1d5/0x1db
[ 781.007261] sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 781.008783] sd 5:0:0:0: [sdb] Asking for cache data failed
[ 781.008793] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 831.200064] BUG: scheduling while atomic: swapper/1/0/0x10000100
[ 831.200073] Modules linked in: hidp hid cryptd aes_x86_64 aes_generic acpi_cpufreq mperf rfcomm cpufreq_powersave cpufreq_userspace bnep cpufreq_stats cpufreq_conservative binfmt_misc uinput microcode fuse joydev btusb bluetooth sbs sbshc coretemp loop kvm_intel kvm snd_hda_codec_realtek snd_hda_intel arc4 snd_hda_codec snd_usb_audio snd_pcm_oss snd_mixer_oss uvcvideo videodev snd_pcm media snd_hwdep snd_usbmidi_lib v4l2_compat_ioctl32 snd_seq_midi iwl4965 snd_rawmidi iwl_legacy mac80211 pcspkr psmouse serio_raw iTCO_wdt iTCO_vendor_support snd_seq_midi_event cfg80211 snd_seq snd_timer snd_seq_device battery snd ac power_supply asus_laptop sparse_keymap rfkill input_polldev soundcore snd_page_alloc evdev processor ext4 mbcache jbd2 crc16 dm_mod ums_realtek usb_storage uas i915 sd_mod crc_t10dif ata_generic drm_kms_helper drm i2c_algo_bit ata_piix uhci_hcd ahci libahci libata thermal ehci_hcd scsi_mod r8169 mii button i2c_core video thermal_sys usbcore usb_common [last unl!
oaded: scsi_wait_scan]
[ 831.200265] CPU 1
[ 831.200269] Modules linked in: hidp hid cryptd aes_x86_64 aes_generic acpi_cpufreq mperf rfcomm cpufreq_powersave cpufreq_userspace bnep cpufreq_stats cpufreq_conservative binfmt_misc uinput microcode fuse joydev btusb bluetooth sbs sbshc coretemp loop kvm_intel kvm snd_hda_codec_realtek snd_hda_intel arc4 snd_hda_codec snd_usb_audio snd_pcm_oss snd_mixer_oss uvcvideo videodev snd_pcm media snd_hwdep snd_usbmidi_lib v4l2_compat_ioctl32 snd_seq_midi iwl4965 snd_rawmidi iwl_legacy mac80211 pcspkr psmouse serio_raw iTCO_wdt iTCO_vendor_support snd_seq_midi_event cfg80211 snd_seq snd_timer snd_seq_device battery snd ac power_supply asus_laptop sparse_keymap rfkill input_polldev soundcore snd_page_alloc evdev processor ext4 mbcache jbd2 crc16 dm_mod ums_realtek usb_storage uas i915 sd_mod crc_t10dif ata_generic drm_kms_helper drm i2c_algo_bit ata_piix uhci_hcd ahci libahci libata thermal ehci_hcd scsi_mod r8169 mii button i2c_core video thermal_sys usbcore usb_common [last unl!
oaded: scsi_wait_scan]
[ 831.200429]
[ 831.200436] Pid: 0, comm: swapper/1 Not tainted 3.2.0-1-amd64 #1 Packard Bell BV EasyNote_BG46-P-001/EasyNote_BG46
[ 831.200449] RIP: 0010:[<ffffffffa01c1398>] [<ffffffffa01c1398>] arch_local_irq_enable+0x4/0x8 [processor]
[ 831.200472] RSP: 0018:ffff88013af17e90 EFLAGS: 00000246
[ 831.200479] RAX: 000000000000000e RBX: ffffffffa01c5240 RCX: 000000c18761bc93
[ 831.200486] RDX: ffff88013fd00000 RSI: 0000000000000078 RDI: 000000c18761f8bf
[ 831.200492] RBP: 0000000000000002 R08: ffff88013af17fd8 R09: 0000000000007c4c
[ 831.200499] R10: 0000000000000046 R11: ffff88013af17fd8 R12: 00000000ffffffff
[ 831.200505] R13: 0000000000000004 R14: ffff8801371e600c R15: 0000000000000000
[ 831.200513] FS: 0000000000000000(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000
[ 831.200520] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 831.200527] CR2: 00007f09182dec91 CR3: 0000000139d4e000 CR4: 00000000000006e0
[ 831.200534] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 831.200540] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 831.200548] Process swapper/1 (pid: 0, threadinfo ffff88013af16000, task ffff88013af080c0)
[ 831.200553] Stack:
[ 831.200558] ffffffffa01c2020 ffff8801371e6020 ffffffffa01c5190 00000000fffffff0
[ 831.200570] 0000000000000002 ffffffffa01c5240 ffffffff812633c3 ffff88013af17fd8
[ 831.200582] ffff88013af17fd8 ffffffff8168ca80 0000000000000000 0000000000000000
[ 831.200593] Call Trace:
[ 831.200610] [<ffffffffa01c2020>] ? acpi_idle_enter_simple+0xc6/0x102 [processor]
[ 831.200628] [<ffffffff812633c3>] ? cpuidle_idle_call+0xec/0x179
[ 831.200639] [<ffffffff8100d255>] ? cpu_idle+0xa1/0xe8
[ 831.200649] [<ffffffff810706b6>] ? arch_local_irq_restore+0x2/0x8
[ 831.200659] [<ffffffff81332861>] ? start_secondary+0x1d5/0x1db
[ 831.200664] Code: c0 89 c5 74 04 80 63 1c fb 48 83 c4 38 89 e8 5b 5d 41 5c 41 5d c3 90 0f 09 66 66 90 66 90 c3 fa 66 66 90 66 66 90 c3 fb 66 66 90 <66> 66 90 c3 48 8b 15 2d f1 56 e1 48 8d 42 fd 48 83 f8 01 0f 96
[ 831.200759] Call Trace:
[ 831.200773] [<ffffffffa01c2020>] ? acpi_idle_enter_simple+0xc6/0x102 [processor]
[ 831.200786] [<ffffffff812633c3>] ? cpuidle_idle_call+0xec/0x179
[ 831.200795] [<ffffffff8100d255>] ? cpu_idle+0xa1/0xe8
[ 831.200803] [<ffffffff810706b6>] ? arch_local_irq_restore+0x2/0x8
[ 831.200811] [<ffffffff81332861>] ? start_secondary+0x1d5/0x1db
[ 833.007279] sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 833.008778] sd 5:0:0:0: [sdb] Asking for cache data failed
[ 833.008788] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 855.120076] usb 1-4: reset high-speed USB device number 2 using ehci_hcd
[ 885.006050] sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 885.007151] sd 5:0:0:0: [sdb] Asking for cache data failed
[ 885.007161] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 937.005798] sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 937.006920] sd 5:0:0:0: [sdb] Asking for cache data failed
[ 937.006930] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 987.104045] BUG: scheduling while atomic: swapper/1/0/0x10000100
[ 987.104054] Modules linked in: hidp hid cryptd aes_x86_64 aes_generic acpi_cpufreq mperf rfcomm cpufreq_powersave cpufreq_userspace bnep cpufreq_stats cpufreq_conservative binfmt_misc uinput microcode fuse joydev btusb bluetooth sbs sbshc coretemp loop kvm_intel kvm snd_hda_codec_realtek snd_hda_intel arc4 snd_hda_codec snd_usb_audio snd_pcm_oss snd_mixer_oss uvcvideo videodev snd_pcm media snd_hwdep snd_usbmidi_lib v4l2_compat_ioctl32 snd_seq_midi iwl4965 snd_rawmidi iwl_legacy mac80211 pcspkr psmouse serio_raw iTCO_wdt iTCO_vendor_support snd_seq_midi_event cfg80211 snd_seq snd_timer snd_seq_device battery snd ac power_supply asus_laptop sparse_keymap rfkill input_polldev soundcore snd_page_alloc evdev processor ext4 mbcache jbd2 crc16 dm_mod ums_realtek usb_storage uas i915 sd_mod crc_t10dif ata_generic drm_kms_helper drm i2c_algo_bit ata_piix uhci_hcd ahci libahci libata thermal ehci_hcd scsi_mod r8169 mii button i2c_core video thermal_sys usbcore usb_common [last unl!
oaded: scsi_wait_scan]
[ 987.104245] CPU 1
[ 987.104248] Modules linked in: hidp hid cryptd aes_x86_64 aes_generic acpi_cpufreq mperf rfcomm cpufreq_powersave cpufreq_userspace bnep cpufreq_stats cpufreq_conservative binfmt_misc uinput microcode fuse joydev btusb bluetooth sbs sbshc coretemp loop kvm_intel kvm snd_hda_codec_realtek snd_hda_intel arc4 snd_hda_codec snd_usb_audio snd_pcm_oss snd_mixer_oss uvcvideo videodev snd_pcm media snd_hwdep snd_usbmidi_lib v4l2_compat_ioctl32 snd_seq_midi iwl4965 snd_rawmidi iwl_legacy mac80211 pcspkr psmouse serio_raw iTCO_wdt iTCO_vendor_support snd_seq_midi_event cfg80211 snd_seq snd_timer snd_seq_device battery snd ac power_supply asus_laptop sparse_keymap rfkill input_polldev soundcore snd_page_alloc evdev processor ext4 mbcache jbd2 crc16 dm_mod ums_realtek usb_storage uas i915 sd_mod crc_t10dif ata_generic drm_kms_helper drm i2c_algo_bit ata_piix uhci_hcd ahci libahci libata thermal ehci_hcd scsi_mod r8169 mii button i2c_core video thermal_sys usbcore usb_common [last unl!
oaded: scsi_wait_scan]
[ 987.104408]
[ 987.104414] Pid: 0, comm: swapper/1 Not tainted 3.2.0-1-amd64 #1 Packard Bell BV EasyNote_BG46-P-001/EasyNote_BG46
[ 987.104427] RIP: 0010:[<ffffffffa01c1398>] [<ffffffffa01c1398>] arch_local_irq_enable+0x4/0x8 [processor]
[ 987.104451] RSP: 0018:ffff88013af17e90 EFLAGS: 00000246
[ 987.104458] RAX: 0000000000001036 RBX: ffffffffa01c5240 RCX: 000000e5d3bc72f5
[ 987.104465] RDX: ffff88013fd00000 RSI: 0000000000000083 RDI: 000000e5d3fbcf33
[ 987.104471] RBP: 0000000000000002 R08: ffff88013af17fd8 R09: 000000000000103b
[ 987.104478] R10: 000000000000463b R11: ffff88013af080c0 R12: 00000000ffffffff
[ 987.104484] R13: 0000000000000004 R14: ffff8801371e600c R15: 0000000000000000
[ 987.104492] FS: 0000000000000000(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000
[ 987.104499] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 987.104505] CR2: 00007fff5a2a6038 CR3: 0000000139040000 CR4: 00000000000006e0
[ 987.104512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 987.104519] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 987.104526] Process swapper/1 (pid: 0, threadinfo ffff88013af16000, task ffff88013af080c0)
[ 987.104532] Stack:
[ 987.104536] ffffffffa01c2020 ffff8801371e6020 ffffffffa01c5190 00000000fffffff0
[ 987.104549] 0000000000000002 ffffffffa01c5240 ffffffff812633c3 ffff88013af17fd8
[ 987.104561] ffff88013af17fd8 ffffffff8168ca80 0000000000000000 0000000000000000
[ 987.104572] Call Trace:
[ 987.104588] [<ffffffffa01c2020>] ? acpi_idle_enter_simple+0xc6/0x102 [processor]
[ 987.104606] [<ffffffff812633c3>] ? cpuidle_idle_call+0xec/0x179
[ 987.104618] [<ffffffff8100d255>] ? cpu_idle+0xa1/0xe8
[ 987.104627] [<ffffffff810706b6>] ? arch_local_irq_restore+0x2/0x8
[ 987.104637] [<ffffffff81332861>] ? start_secondary+0x1d5/0x1db
[ 987.104643] Code: c0 89 c5 74 04 80 63 1c fb 48 83 c4 38 89 e8 5b 5d 41 5c 41 5d c3 90 0f 09 66 66 90 66 90 c3 fa 66 66 90 66 66 90 c3 fb 66 66 90 <66> 66 90 c3 48 8b 15 2d f1 56 e1 48 8d 42 fd 48 83 f8 01 0f 96
[ 987.104737] Call Trace:
[ 987.104751] [<ffffffffa01c2020>] ? acpi_idle_enter_simple+0xc6/0x102 [processor]
[ 987.104764] [<ffffffff812633c3>] ? cpuidle_idle_call+0xec/0x179
[ 987.104773] [<ffffffff8100d255>] ? cpu_idle+0xa1/0xe8
[ 987.104781] [<ffffffff810706b6>] ? arch_local_irq_restore+0x2/0x8
[ 987.104789] [<ffffffff81332861>] ? start_secondary+0x1d5/0x1db
[ 989.006301] sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 989.007422] sd 5:0:0:0: [sdb] Asking for cache data failed
[ 989.007432] sd 5:0:0:0: [sdb] Assuming drive cache: write through

** Model information
sys_vendor: Packard Bell BV
product_name: EasyNote_BG46-P-001
product_version: PC12E00004
chassis_vendor: PACKARD BELL BV
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: 203
board_vendor: PACKARD BELL BV
board_name: EasyNote_BG46
board_version: 1.0

** Loaded modules:
hidp
hid
cryptd
aes_x86_64
aes_generic
acpi_cpufreq
mperf
rfcomm
cpufreq_powersave
cpufreq_userspace
bnep
cpufreq_stats
cpufreq_conservative
binfmt_misc
uinput
microcode
fuse
joydev
btusb
bluetooth
sbs
sbshc
coretemp
loop
kvm_intel
kvm
snd_hda_codec_realtek
snd_hda_intel
arc4
snd_hda_codec
snd_usb_audio
snd_pcm_oss
snd_mixer_oss
uvcvideo
videodev
snd_pcm
media
snd_hwdep
snd_usbmidi_lib
v4l2_compat_ioctl32
snd_seq_midi
iwl4965
snd_rawmidi
iwl_legacy
mac80211
pcspkr
psmouse
serio_raw
iTCO_wdt
iTCO_vendor_support
snd_seq_midi_event
cfg80211
snd_seq
snd_timer
snd_seq_device
battery
snd
ac
power_supply
asus_laptop
sparse_keymap
rfkill
input_polldev
soundcore
snd_page_alloc
evdev
processor
ext4
mbcache
jbd2
crc16
dm_mod
ums_realtek
usb_storage
uas
i915
sd_mod
crc_t10dif
ata_generic
drm_kms_helper
drm
i2c_algo_bit
ata_piix
uhci_hcd
ahci
libahci
libata
thermal
ehci_hcd
scsi_mod
r8169
mii
button
i2c_core
video
thermal_sys
usbcore
usb_common

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
Subsystem: Packard Bell B.V. Device [1631:c10a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Packard Bell B.V. Device [1631:c10a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ec00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 03)
Subsystem: Packard Bell B.V. Device [1631:c10a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>

00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
Subsystem: Packard Bell B.V. Device [1631:c10a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
Subsystem: Packard Bell B.V. Device [1631:c10a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at dc00 [size=32]
Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Packard Bell B.V. Device [1631:c10a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at feaff400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
Subsystem: Packard Bell B.V. Device [1631:c10a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at feaf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe500000-fe5fffff
Prefetchable memory behind bridge: 00000000d0200000-00000000d03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fe600000-fe6fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
Subsystem: Packard Bell B.V. Device [1631:c10a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
Subsystem: Packard Bell B.V. Device [1631:c10a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
Subsystem: Packard Bell B.V. Device [1631:c10a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
Subsystem: Packard Bell B.V. Device [1631:c10a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
Subsystem: Packard Bell B.V. Device [1631:c10a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Packard Bell B.V. Device [1631:c10a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix

00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Packard Bell B.V. Device [1631:c10a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at e880 [size=8]
Region 1: I/O ports at e800 [size=4]
Region 2: I/O ports at e480 [size=8]
Region 3: I/O ports at e400 [size=4]
Region 4: I/O ports at e080 [size=32]
Region 5: Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci

01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at fe5ff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fe5c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169

02:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection [8086:4229] (rev 61)
Subsystem: Intel Corporation Device [8086:1001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fe6fe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwl4965


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 002 Device 002: ID 0424:2504 Standard Microsystems Corp. USB 2.0 Hub
Bus 002 Device 003: ID 04f2:b012 Chicony Electronics Co., Ltd 1.3 MPixel UVC Webcam
Bus 002 Device 004: ID 04f2:b10a Chicony Electronics Co., Ltd
Bus 004 Device 002: ID 0b05:1712 ASUSTek Computer, Inc. BT-183 Bluetooth 2.0+EDR adapter


-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=es_ES.utf8, LC_CTYPE=es_ES.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1

Versions of packages linux-image-3.2.0-1-amd64 recommends:
ii firmware-linux-free 3

Versions of packages linux-image-3.2.0-1-amd64 suggests:
pn grub-pc 1.99-14
pn linux-doc-3.2 <none>

Versions of packages linux-image-3.2.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi 0.35
pn firmware-libertas <none>
pn firmware-linux 0.35
pn firmware-linux-nonfree 0.35
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>

-- debconf information:
linux-image-3.2.0-1-amd64/postinst/depmod-error-initrd-3.2.0-1-amd64: false
* linux-image-3.2.0-1-amd64/postinst/missing-firmware-3.2.0-1-amd64:
linux-image-3.2.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-1-amd64/prerm/removing-running-kernel-3.2.0-1-amd64: true



--
To UNSUBSCRIBE, email to debian-bugs-...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listm...@lists.debian.org

Ben Hutchings

unread,
Jan 21, 2012, 9:30:02 PM1/21/12
to
On Sat, 2012-01-21 at 11:37 +0100, Antonio-M. Corbi Bellot wrote:
> Package: linux-2.6
> Version: 3.2.1-1
> Severity: normal
>
> Dear Maintainer,
>
> After installing this kernel I repeatedly get this kind of messages on any terminal I use:
>
> Message from syslogd@pbell-acb at Jan 21 11:31:32 ...
> kernel:[ 1039.072638] Code: c0 89 c5 74 04 80 63 1c fb 48 83 c4 38 89 e8 5b 5d 41 5c 41 5d c3 90 0f 09 66 66 90 66 90 c3 fa 66 66 90 66 66 90 c3 fb 66 66 90 <66> 66 90 c3 48 8b 15 2d f1 56 e1 48 8d 42 fd 48 83 f8 01 0f 96
>
> A more detailed explanation of the failure is in the log attached.
[...]

Can you send the kernel log from boot up to and including the first such
error? You can probably find this in /var/log/dmesg.

Ben.

--
Ben Hutchings
Knowledge is power. France is bacon.
signature.asc

Antonio-M. Corbi Bellot

unread,
Jan 22, 2012, 6:20:02 AM1/22/12
to
El Sun, 22 Jan 2012 02:22:55 +0000
Ben Hutchings <b...@decadent.org.uk> escribio:
Yes, I also attach a kernel-3.1 log in case you want to compare the boot
process between 3.1 and 3.2 kernels.

I didn't say it but with kernel-3.1 I didn't have this problem.

A. Corbi
dmesg-3.1.txt
dmesg-3.2.txt

Debian Bug Tracking System

unread,
Feb 5, 2012, 2:00:02 PM2/5/12
to
Your message dated Sun, 05 Feb 2012 18:49:29 +0000
with message-id <E1Ru79V-...@franck.debian.org>
and subject line Bug#656724: fixed in linux-2.6 3.2.4-1
has caused the Debian Bug report #656724,
regarding linux-image-3.2.0-1-amd64: After installing this kernel syslogd reports a call trace always the same: Code: c0 89 c5 ...
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)


--
656724: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=656724
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
0 new messages