Bug#902966: pstore: crypto_comp_decompress failed

[Shengjing Zhu]

Package: src:linux
Version: 4.17.3-1
Severity: normal

Dear Maintainer,

Updating to 4.17, dmesg shows pstore: crypto_comp_decompress failed
I didn't know what's pstore used for, maybe efi?
Looking at config, maybe some pstore_*_compress should be set?

grep -i pstore /boot/config-4.17.0-1-amd64
CONFIG_CHROMEOS_PSTORE=m
CONFIG_EFI_VARS_PSTORE=m
# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m


-- Package-specific info:
** Version:
Linux version 4.17.0-1-amd64 (debian...@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-24)) #1 SMP Debian 4.17.3-1 (2018-07-02)

** Command line:
initrd=\EFI\debian\initrd.img root=PARTUUID=71249354-e7c1-4e69-bd05-608837ff5c42 rootfstype=ext4

** Tainted: C (1024)
* Module from drivers/staging has been loaded.

** Kernel log:
[ 3.979407] pstore: decompression failed: -22
[ 3.979479] pstore: crypto_comp_decompress failed, ret = -22!
[ 3.979479] pstore: decompression failed: -22
[ 3.979551] pstore: crypto_comp_decompress failed, ret = -22!
[ 3.979552] pstore: decompression failed: -22
[ 3.979624] pstore: crypto_comp_decompress failed, ret = -22!
[ 3.993509] intel_rapl: Found RAPL domain package
[ 3.994563] pstore: decompression failed: -22
[ 3.995407] intel_rapl: Found RAPL domain core
[ 3.996682] pstore: crypto_comp_decompress failed, ret = -22!
[ 3.997418] intel_rapl: Found RAPL domain uncore
[ 3.998554] pstore: decompression failed: -22
[ 3.998645] pstore: crypto_comp_decompress failed, ret = -22!
[ 3.999333] intel_rapl: Found RAPL domain dram
[ 4.000469] pstore: decompression failed: -22
[ 4.117259] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4350-pcie for chip BCM4350/8
[ 4.117743] pstore: Registered efi as persistent store backend
[ 4.118512] brcmfmac 0000:3a:00.0: firmware: failed to load brcm/brcmfmac4350-pcie.clm_blob (-2)
[ 4.319451] brcmfmac 0000:3a:00.0: Direct firmware load for brcm/brcmfmac4350-pcie.clm_blob failed with error -2
[ 4.319453] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 4.319926] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input13
[ 4.320113] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4350/8 wl0: Oct 22 2015 06:16:26 version 7.35.180.119 (r594535) FWID 01-e791c176
[ 4.342410] Adding 3906556k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:3906556k SSFS
[ 4.376820] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.378394] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 4.381003] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 4.381050] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 4.381093] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 4.381135] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 4.381177] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 4.381220] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 4.523423] brcmfmac 0000:3a:00.0 wlp58s0: renamed from wlan0
[ 4.552166] input: DLL0704:01 06CB:76AE Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0002/input/input21
[ 4.553357] hid-multitouch 0018:06CB:76AE.0002: input,hidraw1: I2C HID v1.00 Mouse [DLL0704:01 06CB:76AE] on i2c-DLL0704:01
[ 4.662333] media: Linux media interface: v0.10
[ 4.672019] Linux video capture interface: v2.00
[ 4.725124] tun: Universal TUN/TAP device driver, 1.6
[ 4.725831] Bluetooth: Core ver 2.22
[ 4.727165] NET: Registered protocol family 31
[ 4.728338] Bluetooth: HCI device and connection manager initialized
[ 4.729884] Bluetooth: HCI socket layer initialized
[ 4.731053] Bluetooth: L2CAP socket layer initialized
[ 4.731804] Bluetooth: SCO socket layer initialized
[ 4.735967] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
[ 4.769924] usbcore: registered new interface driver btusb
[ 4.787516] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 4.788399] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[ 4.789657] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 4.790470] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 4.791379] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input26
[ 4.792316] usbcore: registered new interface driver uvcvideo
[ 4.793357] USB Video Class driver (1.1.1)
[ 4.881632] Bluetooth: hci0: BCM: chip id 110
[ 4.883627] Bluetooth: hci0: BCM: features 0x2f
[ 4.900634] Bluetooth: hci0: zsj-debian
[ 4.902625] Bluetooth: hci0: BCM (003.006.007) build 1703
[ 4.904055] bluetooth hci0: firmware: direct-loading firmware brcm/BCM-0a5c-6412.hcd
[ 4.947906] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.950157] Bluetooth: BNEP filters: protocol multicast
[ 4.952791] Bluetooth: BNEP socket layer initialized
[ 5.154289] ashmem_linux: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.156239] ashmem: initialized
[ 5.256620] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 5.420723] Bluetooth: hci0: BCM (003.006.007) build 1703
[ 5.437664] Bluetooth: hci0: Dell DW1820A
[ 5.508113] loop: module loaded
[ 5.528104] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 5.828800] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 5.874916] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 6.409331] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 6.631124] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 11.202581] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 11.206533] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 11.278246] NET: Registered protocol family 15
[ 11.298641] Initializing XFRM netlink socket
[ 11.747299] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 12.040031] Bluetooth: RFCOMM TTY layer initialized
[ 12.040043] Bluetooth: RFCOMM socket layer initialized
[ 12.040049] Bluetooth: RFCOMM ver 1.11
[ 15.588427] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 15.635399] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 16.166861] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 19.910628] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 26.944286] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready
[ 154.327150] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 154.327169] Bluetooth: HIDP socket layer initialized
[ 154.329056] hid-generic 0005:046D:B00E.0003: unknown main item tag 0x0
[ 154.329446] input: Dell Travel Mouse WM524 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/bluetooth/hci0/hci0:11/0005:046D:B00E.0003/input/input27
[ 154.330175] hid-generic 0005:046D:B00E.0003: input,hidraw2: BLUETOOTH HID v8.00 Mouse [Dell Travel Mouse WM524] on 30:52:cb:e8:1d:3c
[ 163.663292] Bridge firewalling registered
[ 163.768102] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 254.460860] Bluetooth: hci0: advertising data len corrected
[ 791.473982] usb 1-1: new full-speed USB device number 5 using xhci_hcd
[ 791.624308] usb 1-1: New USB device found, idVendor=1050, idProduct=0407, bcdDevice= 4.28
[ 791.624319] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 791.624325] usb 1-1: Product: Yubikey 4 OTP+U2F+CCID
[ 791.624331] usb 1-1: Manufacturer: Yubico
[ 791.628102] input: Yubico Yubikey 4 OTP+U2F+CCID as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1050:0407.0004/input/input28
[ 791.686710] hid-generic 0003:1050:0407.0004: input,hidraw3: USB HID v1.10 Keyboard [Yubico Yubikey 4 OTP+U2F+CCID] on usb-0000:00:14.0-1/input0
[ 791.687775] hid-generic 0003:1050:0407.0005: hiddev0,hidraw4: USB HID v1.10 Device [Yubico Yubikey 4 OTP+U2F+CCID] on usb-0000:00:14.0-1/input1

** Model information
sys_vendor: Dell Inc.
product_name: XPS 13 9350
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: 1.6.1
board_vendor: Dell Inc.
board_name: 020NRM
board_version: A03

** Loaded modules:
nf_conntrack_netlink
nfnetlink
xt_addrtype
xt_conntrack
br_netfilter
hidp
rfcomm
xfrm_user
xfrm4_tunnel
tunnel4
ipcomp
xfrm_ipcomp
esp4
ah4
af_key
xfrm_algo
overlay
squashfs
zstd_decompress
xxhash
cmac
loop
xt_CHECKSUM
iptable_mangle
xt_tcpudp
xt_comment
bridge
stp
llc
iptable_filter
binder_linux
ashmem_linux(C)
bnep
ipt_MASQUERADE
nf_nat_masquerade_ipv4
iptable_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_nat_ipv4
nf_nat
nf_conntrack
libcrc32c
crc32c_generic
btusb
btrtl
btbcm
btintel
uvcvideo
tun
bluetooth
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_common
drbg
videodev
media
ansi_cprng
ecdh_generic
hid_multitouch
nls_ascii
nls_cp437
vfat
fat
snd_hda_codec_hdmi
wmi_bmof
dell_wmi
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
dell_laptop
dell_smbios
dcdbas
coretemp
dell_wmi_descriptor
snd_hda_codec_realtek
snd_hda_codec_generic
snd_soc_skl
snd_soc_skl_ipc
snd_hda_ext_core
snd_soc_sst_dsp
kvm_intel
snd_soc_sst_ipc
snd_soc_acpi
snd_soc_core
snd_compress
kvm
irqbypass
crct10dif_pclmul
crc32_pclmul
efi_pstore
ghash_clmulni_intel
brcmfmac
brcmutil
intel_cstate
cfg80211
rtsx_pci_ms
snd_hda_intel
memstick
rfkill
snd_hda_codec
intel_uncore
intel_rapl_perf
snd_hda_core
snd_hwdep
pcspkr
joydev
efivars
snd_pcm
serio_raw
idma64
iTCO_wdt
snd_timer
iTCO_vendor_support
snd
mei_me
soundcore
intel_lpss_pci
processor_thermal_device
mei
shpchp
intel_lpss
intel_pch_thermal
intel_soc_dts_iosf
wmi
battery
intel_hid
acpi_pad
sparse_keymap
int3400_thermal
int3403_thermal
acpi_thermal_rel
int340x_thermal_zone
ac
evdev
parport_pc
ppdev
lp
parport
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
fscrypto
hid_generic
usbhid
rtsx_pci_sdmmc
mmc_core
crc32c_intel
nvme
xhci_pci
aesni_intel
xhci_hcd
aes_x86_64
crypto_simd
i915
i2c_algo_bit
cryptd
glue_helper
drm_kms_helper
psmouse
i2c_i801
nvme_core
usbcore
rtsx_pci
drm
usb_common
i2c_hid
thermal
fan
hid
video
button

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Skylake Host Bridge/DRAM Registers [8086:1904] (rev 08)
Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers [1028:0704]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: skl_uncore

00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 520 [8086:1916] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Dell Skylake GT2 [HD Graphics 520] [1028:0704]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 124
Region 0: Memory at db000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 90000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915

00:04.0 Signal processing controller [1180]: Intel Corporation Skylake Processor Thermal Subsystem [8086:1903] (rev 08)
Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [1028:0704]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dc720000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device

00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21) (prog-if 30 [XHCI])
Subsystem: Dell Sunrise Point-LP USB 3.0 xHCI Controller [1028:0704]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 125
Region 0: Memory at dc710000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci

00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
Subsystem: Dell Sunrise Point-LP Thermal subsystem [1028:0704]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at dc734000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal

00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21)
Subsystem: Dell Sunrise Point-LP Serial IO I2C Controller [1028:0704]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dc733000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci

00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21)
Subsystem: Dell Sunrise Point-LP Serial IO I2C Controller [1028:0704]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at dc732000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci

00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
Subsystem: Dell Sunrise Point-LP CSME HECI [1028:0704]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 130
Region 0: Memory at dc731000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me

00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port [8086:9d10] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=39, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c4000000-da0fffff
Prefetchable memory behind bridge: 00000000a0000000-00000000c1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 [8086:9d14] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=3a, subordinate=3a, sec-latency=0
Memory behind bridge: dc000000-dc4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.5 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 [8086:9d15] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=3b, subordinate=3b, sec-latency=0
Memory behind bridge: dc600000-dc6fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 [8086:9d18] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=3c, subordinate=3c, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: dc500000-dc5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC Controller [8086:9d48] (rev 21)
Subsystem: Dell Sunrise Point-LP LPC Controller [1028:0704]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
Subsystem: Dell Sunrise Point-LP PMC [1028:0704]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at dc72c000 (32-bit, non-prefetchable) [disabled] [size=16K]

00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d70] (rev 21) (prog-if 80)
Subsystem: Dell Sunrise Point-LP HD Audio [1028:0704]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 131
Region 0: Memory at dc728000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at dc700000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl

00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
Subsystem: Dell Sunrise Point-LP SMBus [1028:0704]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dc730000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801

3a:00.0 Network controller [0280]: Broadcom Limited BCM4350 802.11ac Wireless Network Adapter [14e4:43a3] (rev 08)
Subsystem: Dell BCM4350 802.11ac Wireless Network Adapter [1028:0021]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 132
Region 0: Memory at dc400000 (64-bit, non-prefetchable) [size=32K]
Region 2: Memory at dc000000 (64-bit, non-prefetchable) [size=4M]
Capabilities: <access denied>
Kernel driver in use: brcmfmac
Kernel modules: brcmfmac

3b:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01)
Subsystem: Dell RTS525A PCI Express Card Reader [1028:0704]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 122
Region 1: Memory at dc600000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci

3c:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller [144d:a802] (rev 01) (prog-if 02 [NVM Express])
Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM951/PM951 [144d:a801]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at dc500000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at e000 [size=256]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme


** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0c45:670c Microdia
Bus 001 Device 003: ID 0a5c:6412 Broadcom Corp.
Bus 001 Device 002: ID 0853:0111 Topre Corporation
Bus 001 Device 005: ID 1050:0407 Yubico.com
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (500, 'testing'), (100, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.17.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=zh_CN.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.17.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 25-1
ii linux-base 4.5

Versions of packages linux-image-4.17.0-1-amd64 recommends:
pn apparmor <none>
ii firmware-linux-free 3.4
ii irqbalance 1.3.0-0.1+b1

Versions of packages linux-image-4.17.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02+dfsg1-4
pn linux-doc-4.17 <none>

Versions of packages linux-image-4.17.0-1-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 20170823-1
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20170823-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>

-- no debconf information

[Debian Bug Tracking System]

Your message dated Fri, 6 Jul 2018 10:19:32 +0800
with message-id <CAG+qr1Hkc8qsRZ7svd11sfCWfxP2=1rNnoiioPD...@mail.gmail.com>
and subject line Re: Bug#902966: pstore: crypto_comp_decompress failed
has caused the Debian Bug report #902966,
regarding pstore: crypto_comp_decompress failed
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)


--
902966: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=902966
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems

[Sedat Dilek]

Hi,

I can confirm to see this on Debian/buster AMD64 with...

linux-image-4.17.0-1-amd64 (4.17.8-1)

...and removing all dmesg-efi-*.enc.z files in /sys/fs/pstore/...

...and rebooting made the failures in dmesg go away.

Not sure what 'gzip: stdin: unexpected end of file' means exactly in
this context (see below).

I can send all relevant files if needed.

Thanks,
- Sedat -

P.S.: CSI pstore-deflate failures

root# egrep -i 'pstore|deflate' /boot/config-4.17.0-1-amd64
CONFIG_PPP_DEFLATE=m

CONFIG_CHROMEOS_PSTORE=m
CONFIG_EFI_VARS_PSTORE=m
# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m

CONFIG_CRYPTO_DEFLATE=y
CONFIG_ZLIB_DEFLATE=y

root# printf "\x1f\x8b\x08\x00\x00\x00\x00\x00" | cat -
dmesg-efi-152896783215001.enc.z | gzip -dc
Oops#1 Part15
<6>[ 2.324428] async_tx: api initialized (async)
<6>[ 2.338058] device-mapper: uevent: version 1.0.3
<6>[ 2.339096] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20)
initialised: dm-d...@redhat.com
<5>[ 2.366740] random: fast init done
<6>[ 2.416909] usb 1-2: New USB device found, idVendor=046d, idProduct=c077
<6>[ 2.416913] usb 1-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
<6>[ 2.416916] usb 1-2: Product: USB Optical Mouse
<6>[ 2.416918] usb 1-2: Manufacturer: Logitech
<6>[ 2.419553] input: Logitech USB Optical Mouse as
/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C077.0003/input/input5
<6>[ 2.419852] hid-generic 0003:046D:C077.0003: input,hidraw2: USB
HID v1.11 Mouse [Logitech USB Optical Mouse] on
usb-0000:00:14.0-2/input0
<6>[ 2.548486] usb 1-3: new full-speed USB device number 4 using xhci_hcd
<6>[ 2.684147] psmouse serio1: synaptics: queried max coordinates:
x [..5676], y [..4690]
<6>[ 2.707942] usb 1-3: New USB device found, idVendor=058f, idProduct=9540
<6>[ 2.707947] usb 1-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
<6>[ 2.707951] usb 1-3: Product: EMV Smartcard Reader
<6>[ 2.707954] usb 1-3: Manufacturer: Generic
<6>[ 2.720069] psmouse serio1: synaptics: queried min coordinates:
x [1266..], y [1162..]
<4>[ 2.720079] psmouse serio1: synaptics: The touchpad can support
a better bus than the too old PS/2 protocol. Make sure
MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better
touchpad experience.
<6>[ 2.792567] psmouse serio1: synaptics: Touchpad model: 1, fw:
8.2, id: 0x1e2b1, caps: 0xf002a3/0x940300/0x12e800/0x400000, board id:
3276, fw id: 2491725
<6>[ 2.792582] psmouse serio1: synaptics: serio: Synaptics
pass-through port at isa0060/serio1/input0

gzip: stdin: unexpected end of file

- EOT -

[Esokrates]

I confirm this for 4.17.0-2-amd64 #1 SMP Debian 4.17.14-1 (2018-08-13 on
a XPS 13 9360.

[Vincas Dargis]

Why is this bug marked as Done?

Issue still persists with 4.17.0-2-amd64 on ASUS N551JM laptop.

If users (upgrading from Strech) are expected to execute these workarounds, maybe there should be
NEWS entry of some sort?