Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Bug#844056: Missing brcmfmac43362-sdio.txt stops wireless working
31 views
Skip to first unread message
Wookey
Nov 11, 2016, 11:30:01 PM11/11/16
to
Package: firmware-brcm80211
Version: 20160824-1
Severity: normal
The firmware file brcm/brcmfmac43362-sdio.bin is available in the
package, but the driver brcmfmac (at least on cubietruck and maybe
always) does not work unless the file brcmfmac43362-sdio.txt is also
supplied.
See the thread here for details: https://groups.google.com/forum/#!topic/linux-sunxi/NngIhT-ELVc
That says that for the sdio version of this device the rom/nvram is
normally not fitted so the OS has to provide the config, from this
text file.
It also suggests that the best thing to do is put it in the firmware
package, next to the corresponding firmware.
There may well be more that one variant of this for different boards,
but this one covers several, probably everything using the ap6210.
The file is available from
http://dl.cubieboard.org/public/Cubieboard/benn/firmware/ap6210/nvram_ap6210.txt
and looks like this.
#AP6210_NVRAM_V1.2_03192013
manfid=0x2d0
prodid=0x492
vendid=0x14e4
devid=0x4343
boardtype=0x0598
# Board Revision is P307, same nvram file can be used for P304, P305, P306 and P
307 as the tssi pa params used are same
#Please force the automatic RX PER data to the respective board directory if not
using P307 board, for e.g. for P305 boards force the data into the following di
rectory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
boardrev=0x1307
boardnum=777
xtalfreq=26000
boardflags=0x80201
boardflags2=0x80
sromrev=3
wl0id=0x431b
macaddr=00:90:4c:07:71:12
aa2g=1
ag0=2
maxp2ga0=74
cck2gpo=0x2222
ofdm2gpo=0x44444444
mcs2gpo0=0x6666
mcs2gpo1=0x6666
pa0maxpwr=56
#P207 PA params
#pa0b0=5447
#pa0b1=-658
#pa0b2=-175<div></div>
#Same PA params for P304,P305, P306, P307
pa0b0=5447
pa0b1=-607
pa0b2=-160
pa0itssit=62
pa1itssit=62
cckPwrOffset=5
ccode=0
rssismf2g=0xa
rssismc2g=0x3
rssisav2g=0x7
triso2g=0
noise_cal_enable_2g=0
noise_cal_po_2g=0
swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
temp_add=29767
temp_mult=425
btc_flags=0x6
btc_params0=5000
btc_params1=1000
btc_params6=63
-- System Information:
Debian Release: 8.6
APT prefers stable
APT policy: (990, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386, arm64, armhf
Kernel: Linux 3.16.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Version: 20160824-1
Severity: normal
The firmware file brcm/brcmfmac43362-sdio.bin is available in the
package, but the driver brcmfmac (at least on cubietruck and maybe
always) does not work unless the file brcmfmac43362-sdio.txt is also
supplied.
See the thread here for details: https://groups.google.com/forum/#!topic/linux-sunxi/NngIhT-ELVc
That says that for the sdio version of this device the rom/nvram is
normally not fitted so the OS has to provide the config, from this
text file.
It also suggests that the best thing to do is put it in the firmware
package, next to the corresponding firmware.
There may well be more that one variant of this for different boards,
but this one covers several, probably everything using the ap6210.
The file is available from
http://dl.cubieboard.org/public/Cubieboard/benn/firmware/ap6210/nvram_ap6210.txt
and looks like this.
#AP6210_NVRAM_V1.2_03192013
manfid=0x2d0
prodid=0x492
vendid=0x14e4
devid=0x4343
boardtype=0x0598
# Board Revision is P307, same nvram file can be used for P304, P305, P306 and P
307 as the tssi pa params used are same
#Please force the automatic RX PER data to the respective board directory if not
using P307 board, for e.g. for P305 boards force the data into the following di
rectory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
boardrev=0x1307
boardnum=777
xtalfreq=26000
boardflags=0x80201
boardflags2=0x80
sromrev=3
wl0id=0x431b
macaddr=00:90:4c:07:71:12
aa2g=1
ag0=2
maxp2ga0=74
cck2gpo=0x2222
ofdm2gpo=0x44444444
mcs2gpo0=0x6666
mcs2gpo1=0x6666
pa0maxpwr=56
#P207 PA params
#pa0b0=5447
#pa0b1=-658
#pa0b2=-175<div></div>
#Same PA params for P304,P305, P306, P307
pa0b0=5447
pa0b1=-607
pa0b2=-160
pa0itssit=62
pa1itssit=62
cckPwrOffset=5
ccode=0
rssismf2g=0xa
rssismc2g=0x3
rssisav2g=0x7
triso2g=0
noise_cal_enable_2g=0
noise_cal_po_2g=0
swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
temp_add=29767
temp_mult=425
btc_flags=0x6
btc_params0=5000
btc_params1=1000
btc_params6=63
-- System Information:
Debian Release: 8.6
APT prefers stable
APT policy: (990, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386, arm64, armhf
Kernel: Linux 3.16.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Debian Bug Tracking System
Jun 5, 2017, 7:40:02 PM6/5/17
to
Processing control commands:
> tag -1 wontfix
Bug #844056 [firmware-brcm80211] Missing brcmfmac43362-sdio.txt stops wireless working
Added tag(s) wontfix.
--
844056: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=844056
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
> tag -1 wontfix
Bug #844056 [firmware-brcm80211] Missing brcmfmac43362-sdio.txt stops wireless working
Added tag(s) wontfix.
--
844056: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=844056
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
Ben Hutchings
Jun 5, 2017, 7:40:02 PM6/5/17
to
On Sat, 12 Nov 2016 04:23:18 +0000 Wookey <woo...@debian.org> wrote:
[...]
...as long as you don't ever use two of the same network, right? :-)
Ben.
--
Ben Hutchings
Every program is either trivial or else contains at least one bug
[...]
> There may well be more that one variant of this for different boards,
> but this one covers several, probably everything using the ap6210.
[...]
> but this one covers several, probably everything using the ap6210.
> macaddr=00:90:4c:07:71:12
[...]
...as long as you don't ever use two of the same network, right? :-)
Ben.
--
Ben Hutchings
Every program is either trivial or else contains at least one bug
Ben Hutchings
Jun 5, 2017, 7:40:02 PM6/5/17
to
Control: tag -1 wontfix
This file is machine-specific, so we should not just install a version
that's known to work on one particular machine.
In theory we could collect versions for different machines and symlink
the right one into place at install time based on machine ID. But I
think that's beyond the scope of this package.
> Package: firmware-brcm80211
> Version: 20160824-1
> Severity: normal
>
> The firmware file brcm/brcmfmac43362-sdio.bin is available in the
> package, but the driver brcmfmac (at least on cubietruck and maybe
> always) does not work unless the file brcmfmac43362-sdio.txt is also
> supplied.
[...]
> Version: 20160824-1
> Severity: normal
>
> The firmware file brcm/brcmfmac43362-sdio.bin is available in the
> package, but the driver brcmfmac (at least on cubietruck and maybe
> always) does not work unless the file brcmfmac43362-sdio.txt is also
> supplied.
This file is machine-specific, so we should not just install a version
that's known to work on one particular machine.
In theory we could collect versions for different machines and symlink
the right one into place at install time based on machine ID. But I
think that's beyond the scope of this package.
Debian Bug Tracking System
Mar 27, 2021, 8:40:03 AM3/27/21
to
Your message dated Sat, 27 Mar 2021 12:34:06 +0000
with message-id <E1lQ88k-...@fasolo.debian.org>
and subject line Bug#844056: fixed in firmware-nonfree 20210315-2
has caused the Debian Bug report #844056,
regarding Missing brcmfmac43362-sdio.txt stops wireless working
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
844056: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=844056
with message-id <E1lQ88k-...@fasolo.debian.org>
and subject line Bug#844056: fixed in firmware-nonfree 20210315-2
has caused the Debian Bug report #844056,
regarding Missing brcmfmac43362-sdio.txt stops wireless working
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
844056: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=844056
0 new messages