Bug#991453: linux-image-5.10.0-8-amd64: Radeon 6800 XT: 100% GPU core usage & 74 Watts when idle
piorunz
Version: 5.10.46-2
Severity: important
X-Debbugs-Cc: pio...@gmx.com
Dear Maintainer,
I am using Bullseye 11 with Radeon 6800 XT and noticed higher
temperature and noise comparing to Windows, so I investigated this and
found the fault. GPU core works at 100% usage at all times, even at idle.
$ cat /sys/class/drm/card0/device/gpu_busy_percent
99
$ sensors
(...)
amdgpu-pci-0900
Adapter: PCI adapter
vddgfx: 1.14 V
fan1: 1098 RPM (min = 0 RPM, max = 3000 RPM)
edge: +51.0°C (crit = +100.0°C, hyst = -273.1°C)
(emerg = +105.0°C)
junction: +55.0°C (crit = +110.0°C, hyst = -273.1°C)
(emerg = +115.0°C)
mem: +56.0°C (crit = +100.0°C, hyst = -273.1°C)
(emerg = +105.0°C)
power1: 74.00 W (cap = 272.00 W)
radeontop - 100% GPU usage and full clocks:
Graphics pipe 100.00%
1.00G / 1.00G Memory Clock 100.00%
2.47G / 2.58G Shader Clock 95.92%
This card should be using 0% GPU time when idle, downclocking core to 10 MHz,
and using 9 to 34W depending on numbers of monitors connected.
On Debian 5.10 kernel, it's using 74W minimum, at all times.
This I believe has been fixed upstream:
https://gitlab.freedesktop.org/drm/amd/-/issues/1632
Can you please make sure this will be backported to Debian 5.10 kernel?
Thanks.
Kind regards,
piorunz
-- Package-specific info:
** Version:
Linux version 5.10.0-8-amd64 (debian...@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.46-2 (2021-07-20)
** Command line:
BOOT_IMAGE=/@rootfs/boot/vmlinuz-5.10.0-8-amd64 root=UUID=77ba5989-5d64-4929-9145-ede6751a4102 ro rootflags=subvol=@rootfs amdgpu.ppfeaturemask=0xfffd7fff
** Not tainted
** Kernel log:
[ 4256.341304] microcode: CPU13: patch_level=0x0a201016
[ 4256.343423] ACPI: \_SB_.PLTF.C00B: Found 2 idle states
[ 4256.345209] CPU13 is up
[ 4256.345219] smpboot: Booting Node 0 Processor 14 APIC 0xd
[ 4256.345313] microcode: CPU14: patch_level=0x0a201016
[ 4256.347435] ACPI: \_SB_.PLTF.C00D: Found 2 idle states
[ 4256.349222] CPU14 is up
[ 4256.349236] smpboot: Booting Node 0 Processor 15 APIC 0xf
[ 4256.349330] microcode: CPU15: patch_level=0x0a201016
[ 4256.351451] ACPI: \_SB_.PLTF.C00F: Found 2 idle states
[ 4256.353230] CPU15 is up
[ 4256.354126] ACPI: Waking up from system sleep state S3
[ 4256.453431] usb usb1: root hub lost power or was reset
[ 4256.453432] usb usb2: root hub lost power or was reset
[ 4256.453565] sd 0:0:0:0: [sda] Starting disk
[ 4256.453566] sd 1:0:0:0: [sdb] Starting disk
[ 4256.453568] sd 2:0:0:0: [sdc] Starting disk
[ 4256.453573] sd 3:0:0:0: [sdd] Starting disk
[ 4256.453577] sd 5:0:0:0: [sde] Starting disk
[ 4256.453768] [drm] PCIE GART of 512M enabled (table at 0x0000008000000000).
[ 4256.453786] [drm] PSP is resuming...
[ 4256.648463] nvme nvme0: 8/0/0 default/read/poll queues
[ 4256.661079] [drm] reserve 0xa00000 from 0x83fe000000 for PSP TMR
[ 4256.768036] ata5: SATA link down (SStatus 0 SControl 330)
[ 4256.801229] usb 1-7: reset high-speed USB device number 8 using xhci_hcd
[ 4256.929094] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4256.929312] ata6.00: configured for UDMA/133
[ 4256.937100] amdgpu 0000:09:00.0: amdgpu: SMU is resuming...
[ 4256.937104] amdgpu 0000:09:00.0: amdgpu: smu driver if version = 0x00000039, smu fw if version = 0x0000003b, smu fw version = 0x003a3100 (58.49.0)
[ 4256.937105] amdgpu 0000:09:00.0: amdgpu: SMU driver if version not matched
[ 4257.005584] amdgpu 0000:09:00.0: amdgpu: SMU is resumed successfully!
[ 4257.006633] [drm] DMUB hardware initialized: version=0x02000001
[ 4257.081355] usb 1-6: reset full-speed USB device number 7 using xhci_hcd
[ 4257.445313] usb 1-9: reset high-speed USB device number 9 using xhci_hcd
[ 4257.737242] usb 1-10: reset full-speed USB device number 11 using xhci_hcd
[ 4258.093501] usb 1-2: reset full-speed USB device number 2 using xhci_hcd
[ 4258.108494] [drm] kiq ring mec 2 pipe 1 q 0
[ 4258.125155] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4258.134188] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[ 4258.134405] [drm] JPEG decode initialized successfully.
[ 4258.134427] amdgpu 0000:09:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[ 4258.134428] amdgpu 0000:09:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 4258.134428] amdgpu 0000:09:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 4258.134429] amdgpu 0000:09:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[ 4258.134429] amdgpu 0000:09:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[ 4258.134429] amdgpu 0000:09:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[ 4258.134429] amdgpu 0000:09:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[ 4258.134430] amdgpu 0000:09:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[ 4258.134430] amdgpu 0000:09:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[ 4258.134430] amdgpu 0000:09:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[ 4258.134431] amdgpu 0000:09:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
[ 4258.134431] amdgpu 0000:09:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0
[ 4258.134431] amdgpu 0000:09:00.0: amdgpu: ring sdma2 uses VM inv eng 14 on hub 0
[ 4258.134431] amdgpu 0000:09:00.0: amdgpu: ring sdma3 uses VM inv eng 15 on hub 0
[ 4258.134432] amdgpu 0000:09:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 1
[ 4258.134432] amdgpu 0000:09:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 1
[ 4258.134432] amdgpu 0000:09:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 1
[ 4258.134433] amdgpu 0000:09:00.0: amdgpu: ring vcn_dec_1 uses VM inv eng 5 on hub 1
[ 4258.134433] amdgpu 0000:09:00.0: amdgpu: ring vcn_enc_1.0 uses VM inv eng 6 on hub 1
[ 4258.134433] amdgpu 0000:09:00.0: amdgpu: ring vcn_enc_1.1 uses VM inv eng 7 on hub 1
[ 4258.134434] amdgpu 0000:09:00.0: amdgpu: ring jpeg_dec uses VM inv eng 8 on hub 1
[ 4258.268964] ata2.00: configured for UDMA/133
[ 4258.405282] usb 1-7.3: reset full-speed USB device number 10 using xhci_hcd
[ 4258.633132] OOM killer enabled.
[ 4258.633133] Restarting tasks ... done.
[ 4258.634486] PM: suspend exit
[ 4259.537440] usb usb1-port3: Cannot enable. Maybe the USB cable is bad?
[ 4260.069252] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4260.096110] ata3.00: configured for UDMA/133
[ 4260.285261] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4260.285265] ata1.00: link online but device misclassified
[ 4260.333251] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4260.367605] ata4.00: configured for UDMA/133
[ 4260.449270] usb usb1-port3: Cannot enable. Maybe the USB cable is bad?
[ 4260.449298] usb usb1-port3: attempt power cycle
[ 4261.497304] usb usb1-port3: Cannot enable. Maybe the USB cable is bad?
[ 4262.465370] usb usb1-port3: Cannot enable. Maybe the USB cable is bad?
[ 4262.465394] usb usb1-port3: unable to enumerate USB device
[ 4265.433498] ata1.00: qc timeout (cmd 0xec)
[ 4265.433507] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 4265.433509] ata1.00: revalidation failed (errno=-5)
[ 4265.913510] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4265.915729] ata1.00: configured for UDMA/133
[ 4266.133518] Generic FE-GE Realtek PHY r8169-600:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-600:00, irq=IGNORE)
[ 4266.310578] r8169 0000:06:00.0 enp6s0: Link is Down
[ 4270.027035] r8169 0000:06:00.0 enp6s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 4270.027045] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
[ 5471.634713] kauditd_printk_skb: 1 callbacks suppressed
[ 5471.634714] audit: type=1400 audit(1627081215.305:54): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=21007 comm="cupsd" capability=12 capname="net_admin"
[ 5471.641750] audit: type=1400 audit(1627081215.313:55): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=21010 comm="cups-browsed" capability=23 capname="sys_nice"
[ 6014.642430] audit: type=1400 audit(1627081758.303:56): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/hwdata/pnp.ids" pid=23316 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 6014.644141] audit: type=1400 audit(1627081758.303:57): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/hwdata/pnp.ids" pid=23316 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 6014.651975] audit: type=1400 audit(1627081758.311:58): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/libdrm/amdgpu.ids" pid=23317 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 6014.665002] audit: type=1400 audit(1627081758.323:59): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/sys/kernel/core_pattern" pid=23316 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 6014.751179] audit: type=1400 audit(1627081758.411:60): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/libdrm/amdgpu.ids" pid=23316 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 6014.925227] audit: type=1400 audit(1627081758.583:61): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/pioruns/.config/emaildefaults" pid=23316 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 6015.123873] audit: type=1400 audit(1627081758.783:62): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/pioruns/.thunderbird/profiles.ini" pid=23316 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 6015.125135] audit: type=1400 audit(1627081758.783:63): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/pioruns/.thunderbird/rtbdzrrd.default/cert9.db" pid=23316 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
[ 6015.125172] audit: type=1400 audit(1627081758.783:64): apparmor="ALLOWED" operation="file_lock" profile="libreoffice-soffice" name="/home/pioruns/.thunderbird/rtbdzrrd.default/cert9.db" pid=23316 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=1000 ouid=1000
[ 6015.125398] audit: type=1400 audit(1627081758.783:65): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/pioruns/.thunderbird/rtbdzrrd.default/key4.db" pid=23316 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
** Model information
sys_vendor: ASUS
product_name: System Product Name
product_version: System Version
chassis_vendor: Default string
chassis_version: Default string
bios_vendor: American Megatrends Inc.
bios_version: 2404
board_vendor: ASUSTeK COMPUTER INC.
board_name: PRIME B550-PLUS
board_version: Rev X.0x
** Loaded modules:
xt_state
macvlan
xt_CHECKSUM
xt_MASQUERADE
xt_conntrack
ipt_REJECT
nf_reject_ipv4
xt_tcpudp
nft_compat
nft_chain_nat
nf_nat
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
nft_counter
nf_tables
nfnetlink
bridge
stp
llc
binfmt_misc
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_common
snd_usb_audio
videodev
snd_usbmidi_lib
snd_rawmidi
snd_seq_device
joydev
mc
edac_mce_amd
kvm_amd
snd_hda_codec_realtek
nls_ascii
nls_cp437
snd_hda_codec_generic
ledtrig_audio
kvm
snd_hda_codec_hdmi
vfat
snd_hda_intel
snd_intel_dspcfg
soundwire_intel
soundwire_generic_allocation
snd_soc_core
fat
irqbypass
snd_compress
soundwire_cadence
ghash_clmulni_intel
snd_hda_codec
aesni_intel
snd_hda_core
libaes
crypto_simd
eeepc_wmi
cryptd
snd_hwdep
glue_helper
asus_wmi
soundwire_bus
battery
snd_pcm
sparse_keymap
rapl
snd_timer
rfkill
video
snd
pcspkr
efi_pstore
sp5100_tco
wmi_bmof
ccp
k10temp
watchdog
soundcore
rng_core
sg
evdev
acpi_cpufreq
parport_pc
ppdev
lp
parport
fuse
configfs
sunrpc
efivarfs
ip_tables
x_tables
autofs4
btrfs
blake2b_generic
xor
raid6_pq
libcrc32c
crc32c_generic
sd_mod
hid_generic
usbhid
hid
amdgpu
gpu_sched
i2c_algo_bit
ttm
xhci_pci
xhci_hcd
drm_kms_helper
ahci
libahci
cec
libata
drm
nvme
r8169
usbcore
nvme_core
realtek
mdio_devres
crc32_pclmul
crc32c_intel
scsi_mod
t10_pi
libphy
i2c_piix4
crc_t10dif
crct10dif_generic
usb_common
crct10dif_pclmul
wmi
crct10dif_common
gpio_amdpt
gpio_generic
button
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Root Complex [1022:1480]
Subsystem: ASUSTeK Computer Inc. Starship/Matisse Root Complex [1043:8808]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse IOMMU [1022:1481]
Subsystem: ASUSTeK Computer Inc. Starship/Matisse IOMMU [1043:8808]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 25
Capabilities: <access denied>
00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 0
00:01.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge [1022:1483] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 26
IOMMU group: 1
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: fcf00000-fcffffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:01.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge [1022:1483] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 27
IOMMU group: 2
Bus: primary=00, secondary=02, subordinate=06, sec-latency=0
I/O behind bridge: 0000f000-0000ffff [size=4K]
Memory behind bridge: fcd00000-fcefffff [size=2M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
DeviceName: Onboard IGD
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 3
00:03.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 4
00:03.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge [1022:1483] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 28
IOMMU group: 5
Bus: primary=00, secondary=07, subordinate=09, sec-latency=0
I/O behind bridge: 0000e000-0000efff [size=4K]
Memory behind bridge: fca00000-fccfffff [size=3M]
Prefetchable memory behind bridge: 0000007800000000-0000007c0fffffff [size=16640M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 6
00:05.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 7
00:07.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 8
00:07.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Internal PCIe GPP Bridge 0 to bus[E:B] [1022:1484] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
IOMMU group: 9
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:08.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 10
00:08.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Internal PCIe GPP Bridge 0 to bus[E:B] [1022:1484] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
IOMMU group: 11
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: fc700000-fc9fffff [size=3M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 61)
Subsystem: ASUSTeK Computer Inc. FCH SMBus Controller [1043:87c0]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 12
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e] (rev 51)
Subsystem: ASUSTeK Computer Inc. FCH LPC Bridge [1043:87c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 12
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 0 [1022:1440]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 13
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 1 [1022:1441]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 13
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 2 [1022:1442]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 13
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 3 [1022:1443]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 13
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 4 [1022:1444]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 13
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 5 [1022:1445]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 13
00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 6 [1022:1446]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 13
00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 7 [1022:1447]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 13
01:00.0 Non-Volatile memory controller [0108]: Micron/Crucial Technology P2 NVMe PCIe SSD [c0a9:540a] (rev 01) (prog-if 02 [NVM Express])
Subsystem: Micron/Crucial Technology P2 NVMe PCIe SSD [c0a9:540a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
NUMA node: 0
IOMMU group: 14
Region 0: Memory at fcf00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
02:00.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Device [1022:43ee] (prog-if 30 [XHCI])
Subsystem: ASMedia Technology Inc. Device [1b21:1142]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 34
IOMMU group: 15
Region 0: Memory at fcea0000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
02:00.1 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] Device [1022:43eb] (prog-if 01 [AHCI 1.0])
Subsystem: ASMedia Technology Inc. Device [1b21:1062]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 44
IOMMU group: 15
Region 5: Memory at fce80000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at fce00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
02:00.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43e9] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 33
IOMMU group: 15
Bus: primary=02, secondary=03, subordinate=06, sec-latency=0
I/O behind bridge: 0000f000-0000ffff [size=4K]
Memory behind bridge: fcd00000-fcdfffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
03:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43ea] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
IOMMU group: 15
Bus: primary=03, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
03:08.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43ea] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 36
IOMMU group: 15
Bus: primary=03, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
03:09.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43ea] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 38
IOMMU group: 15
Bus: primary=03, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000f000-0000ffff [size=4K]
Memory behind bridge: fcd00000-fcdfffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Subsystem: ASUSTeK Computer Inc. PRIME B450M-A Motherboard [1043:8677]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 37
IOMMU group: 15
Region 0: I/O ports at f000 [size=256]
Region 2: Memory at fcd04000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at fcd00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
07:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Upstream Port of PCI Express Switch [1002:1478] (rev c1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
IOMMU group: 16
Region 0: Memory at fcc00000 (32-bit, non-prefetchable) [size=16K]
Bus: primary=07, secondary=08, subordinate=09, sec-latency=0
I/O behind bridge: 0000e000-0000efff [size=4K]
Memory behind bridge: fca00000-fcbfffff [size=2M]
Prefetchable memory behind bridge: 0000007800000000-0000007c0fffffff [size=16640M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
08:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Downstream Port of PCI Express Switch [1002:1479] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
IOMMU group: 17
Bus: primary=08, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 0000e000-0000efff [size=4K]
Memory behind bridge: fca00000-fcbfffff [size=2M]
Prefetchable memory behind bridge: 0000007800000000-0000007c0fffffff [size=16640M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
09:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [1002:73bf] (rev c1) (prog-if 00 [VGA controller])
Subsystem: Tul Corporation / PowerColor Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] [148c:2406]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 71
IOMMU group: 18
Region 0: Memory at 7800000000 (64-bit, prefetchable) [size=16G]
Region 2: Memory at 7c00000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at e000 [size=256]
Region 5: Memory at fca00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at fcb00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: amdgpu
Kernel modules: amdgpu
09:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT] [1002:ab28]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT] [1002:ab28]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 78
IOMMU group: 19
Region 0: Memory at fcb20000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
0a:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Function [1022:148a]
Subsystem: ASUSTeK Computer Inc. Starship/Matisse PCIe Dummy Function [1043:8808]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 20
Capabilities: <access denied>
0b:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Reserved SPP [1022:1485]
Subsystem: ASUSTeK Computer Inc. Starship/Matisse Reserved SPP [1043:8808]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 21
Capabilities: <access denied>
0b:00.1 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Cryptographic Coprocessor PSPCPP [1022:1486]
Subsystem: ASUSTeK Computer Inc. Starship/Matisse Cryptographic Coprocessor PSPCPP [1043:8808]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 72
IOMMU group: 22
Region 2: Memory at fc800000 (32-bit, non-prefetchable) [size=1M]
Region 5: Memory at fc908000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ccp
Kernel modules: ccp
0b:00.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Matisse USB 3.0 Host Controller [1022:149c] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Matisse USB 3.0 Host Controller [1043:87c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 54
IOMMU group: 23
Region 0: Memory at fc700000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
0b:00.4 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse HD Audio Controller [1022:1487]
Subsystem: ASUSTeK Computer Inc. Starship/Matisse HD Audio Controller [1043:87e3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 43
IOMMU group: 24
Region 0: Memory at fc900000 (32-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
** USB devices:
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 009: ID 046d:09a5 Logitech, Inc. Quickcam 3000 For Business
Bus 001 Device 010: ID 1b1c:0c04 Corsair Link Cooling Node
Bus 001 Device 008: ID 05e3:0610 Genesys Logic, Inc. Hub
Bus 001 Device 007: ID 0b05:1939 ASUSTek Computer, Inc. AURA LED Controller
Bus 001 Device 002: ID 1b1c:1b36 Corsair Corsair Gaming K70 LUX Keyboard
Bus 001 Device 011: ID 09da:9066 A4Tech Co., Ltd. F3 V-Track Gaming Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 11.0
APT prefers testing
APT policy: (1000, 'testing'), (500, 'testing-security'), (400, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.10.0-8-amd64 (SMP w/16 CPU threads)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.10.0-8-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.140
ii kmod 28-1
ii linux-base 4.6
Versions of packages linux-image-5.10.0-8-amd64 recommends:
ii apparmor 2.13.6-10
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.10.0-8-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.04-19
pn linux-doc-5.10 <none>
Versions of packages linux-image-5.10.0-8-amd64 is related to:
ii firmware-amd-graphics 20210315-2
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20210315-2
ii firmware-misc-nonfree 20210315-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20210315-2
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Diederik de Haas
On zaterdag 24 juli 2021 01:29:55 CEST piorunz wrote:
> GPU core works at 100% usage at all times, even at idle.
>
> $ cat /sys/class/drm/card0/device/gpu_busy_percent
> 99
>
> $ sensors
> (...)
> amdgpu-pci-0900
> Adapter: PCI adapter
> vddgfx: 1.14 V
> fan1: 1098 RPM (min = 0 RPM, max = 3000 RPM)
> edge: +51.0°C (crit = +100.0°C, hyst = -273.1°C)
> (emerg = +105.0°C)
> junction: +55.0°C (crit = +110.0°C, hyst = -273.1°C)
> (emerg = +115.0°C)
> mem: +56.0°C (crit = +100.0°C, hyst = -273.1°C)
> (emerg = +105.0°C)
> power1: 74.00 W (cap = 272.00 W)
>
> radeontop - 100% GPU usage and full clocks:
> Graphics pipe 100.00%
> 1.00G / 1.00G Memory Clock 100.00%
> 2.47G / 2.58G Shader Clock 95.92%
99
$ sensors
Adapter: PCI adapter
Composite: +43.9°C (low = -273.1°C, high = +72.8°C)
(crit = +75.8°C)
Sensor 1: +43.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +49.9°C (low = -273.1°C, high = +65261.8°C)
amdgpu-pci-0c00
Adapter: PCI adapter
vddgfx: 1.09 V
fan1: 1240 RPM (min = 0 RPM, max = 3500 RPM)
edge: +50.0°C (crit = +85.0°C, hyst = -273.1°C)
(emerg = +90.0°C)
junction: +63.0°C (crit = +105.0°C, hyst = -273.1°C)
(emerg = +110.0°C)
mem: +51.0°C (crit = +95.0°C, hyst = -273.1°C)
(emerg = +100.0°C)
power1: 74.00 W (cap = 260.00 W)
k10temp-pci-00c3
Adapter: PCI adapter
Tctl: +66.0°C
Tdie: +46.0°C
And also for radeontop.
> This I believe has been fixed upstream:
> https://gitlab.freedesktop.org/drm/amd/-/issues/1632
>
> Can you please make sure this will be backported to Debian 5.10 kernel?
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=fea853aca3210c21dfcf07bb82d501b7fd1900a7
tv.d...@googlemail.com
Polaris (RX 570) is affected too. So it's not only an issue with Navi 2X
. Is it worth opening a separate bug report for each card?
Diederik de Haas
> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=l
> inux-5.10.y&id=fea853aca3210c21dfcf07bb82d501b7fd1900a7
was created, which should mean that any version before 5.10.46 should NOT
have this problem. The version uploaded to the Debian archive before that
was 5.10.40-1, which in my case was linux-image-5.10.0-7-amd64.
I no longer had that installed, so added the following line to /e/a/sources.list:
deb [check-valid-until=no] https://snapshot.debian.org/archive/debian/20210529T204006Z/ sid main
Installed linux-image-5.10.0-7-amd64 and rebooted into that ...
0
nvme-pci-0100
Adapter: PCI adapter
(crit = +75.8°C)
Sensor 1: +32.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +41.9°C (low = -273.1°C, high = +65261.8°C)
amdgpu-pci-0c00
Adapter: PCI adapter
vddgfx: 750.00 mV
fan1: 1182 RPM (min = 0 RPM, max = 3500 RPM)
edge: +37.0°C (crit = +85.0°C, hyst = -273.1°C)
(emerg = +90.0°C)
junction: +38.0°C (crit = +105.0°C, hyst = -273.1°C)
(emerg = +110.0°C)
mem: +39.0°C (crit = +95.0°C, hyst = -273.1°C)
(emerg = +100.0°C)
power1: 7.00 W (cap = 260.00 W)
k10temp-pci-00c3
Adapter: PCI adapter
Tctl: +65.6°C
Tdie: +45.6°C
# radeontop
Graphics pipe 0.83%
0.17G / 0.94G Memory Clock 17.67%
0.03G / 1.63G Shader Clock 1.81%
So running a kernel != 5.10.46 does not have this problem :)
Diederik de Haas
> > It's already backported to 5.10, just after 5.10.46 was released:
> > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h
> > =l inux-5.10.y&id=fea853aca3210c21dfcf07bb82d501b7fd1900a7
>
> Just found out the reverted commit was introduced just before the 5.10.46
> tag was created, which should mean that any version before 5.10.46 should
> NOT have this problem.
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=1bd81429d53ded4e111616c755a64fad80849354
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=fea853aca3210c21dfcf07bb82d501b7fd1900a7
The first one I saved (and attached) as 'fix-bug991453-part1.patch' and the
second one as 'fix-bug991453-part1.patch'
Then I followed step 4.2.1 and 4.2.2 of the kernel handbook:
https://kernel-team.pages.debian.net/kernel-handbook/ch-common-tasks.html#s-common-official
That resulted in 'linux-image-5.10.0-8-amd64-unsigned_5.10.46-2a~test_amd64.deb'
which I then installed on my system and rebooted into that.
$ uname -a
Linux bagend 5.10.0-8-amd64 #1 SMP Debian 5.10.46-2a~test (2021-07-24) x86_64 GNU/Linux
0
$ sensors
nvme-pci-0100
Adapter: PCI adapter
(crit = +75.8°C)
Sensor 1: +40.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +51.9°C (low = -273.1°C, high = +65261.8°C)
amdgpu-pci-0c00
Adapter: PCI adapter
vddgfx: 750.00 mV
edge: +42.0°C (crit = +85.0°C, hyst = -273.1°C)
(emerg = +90.0°C)
junction: +42.0°C (crit = +105.0°C, hyst = -273.1°C)
(emerg = +110.0°C)
mem: +43.0°C (crit = +95.0°C, hyst = -273.1°C)
power1: 7.00 W (cap = 260.00 W)
k10temp-pci-00c3
Adapter: PCI adapter
Tdie: +56.5°C
# radeontop
Graphics pipe 0.83%
0.17G / 0.94G Memory Clock 17.67%
These are the same 'scores' as I had with the 5.10.0-7-amd64 kernel.
So applying the mentioned/attached patches on top of the current kernel
as available in Debian Testing/Bullseye and Sid, fixes the problem.
In the last year I've spend considerable time to bring down my energy
usage/needs and I never expected that (reverting) 2 kernel commits
would save me 67W (continuously), so thank you very much piorunz for
bringing this to my attention.
I normally have a quiet system and noticed it often wasn't quiet lately;
I blame(d) 'baloo' (file indexing) for that, but it turns out it was mostly
my GPU running at 100% all the time.
As it looks like a lot of users with AMD GPUs are affected and the
considerable energy wasted because of it (Climate Change),
I really hope/urge that these 2 patches/reverts are applied before Bullseye
gets released.
Cheers,
Diederik