Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Bug#1026870: linux-image-6.0.0-6-amd64 - significant performance degradation

276 views
Skip to first unread message

Kamila Szewczyk

unread,
Dec 22, 2022, 4:30:04 PM12/22/22
to
Package: src:linux
Version: 6.0.12-1
Severity: important
X-Debbugs-Cc: kspala...@gmail.com

Dear Maintainer,

I have recently upgraded my Linux kernel to package version 6.0.12-1
(6.0.0-6) from version 6.0.8 (6.0.0-4). Since then I am experiencing
significant performance degradation. I have tried to observe the
cause of it using the `perf' tool, however, I haven't had any luck
with this so far, and the kernel has been logging the following
messages throughout the procedure:

>>>
Message from syslogd@laplace at Dec 22 21:51:20 ...
kernel:[ 5212.738589] Uhhuh. NMI received for unknown reason 2d on CPU 9.

Message from syslogd@laplace at Dec 22 21:51:20 ...
kernel:[ 5212.738607] Dazed and confused, but trying to continue

Message from syslogd@laplace at Dec 22 21:51:21 ...
kernel:[ 5214.422563] Uhhuh. NMI received for unknown reason 2d on CPU 7.

Message from syslogd@laplace at Dec 22 21:51:21 ...
kernel:[ 5214.422582] Dazed and confused, but trying to continue
<<<

So far I have observed that returning to the previously installed
kernel version solves most of my problems. I have also compared the
execution times using `perf' on both of the kernels.

New kernel:
<<<
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
E: Unable to locate package asdfghjkl

Performance counter stats for 'apt install asdfghjkl':

2,409.28 msec task-clock # 0.999 CPUs utilized
11 context-switches # 4.566 /sec
4 cpu-migrations # 1.660 /sec
2,526 page-faults # 1.048 K/sec
961,017,382 cycles # 0.399 GHz (83.39%)
15,353,337 stalled-cycles-frontend # 1.60% frontend cycles idle (83.40%)
226,730,321 stalled-cycles-backend # 23.59% backend cycles idle (83.40%)
2,018,766,682 instructions # 2.10 insn per cycle
# 0.11 stalled cycles per insn (83.39%)
383,290,701 branches # 159.089 M/sec (83.35%)
1,819,464 branch-misses # 0.47% of all branches (83.24%)

2.411797623 seconds time elapsed

2.349918000 seconds user
0.062534000 seconds sys
>>>

Old kernel:
<<<
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
E: Unable to locate package asdfghjkl

Performance counter stats for 'apt install asdfghjkl':

852.22 msec task-clock # 0.940 CPUs utilized
392 context-switches # 459.975 /sec
3 cpu-migrations # 3.520 /sec
2,548 page-faults # 2.990 K/sec
1,172,831,665 cycles # 1.376 GHz (83.08%)
43,524,987 stalled-cycles-frontend # 3.71% frontend cycles idle (83.76%)
412,509,320 stalled-cycles-backend # 35.17% backend cycles idle (82.83%)
2,060,235,707 instructions # 1.76 insn per cycle
# 0.20 stalled cycles per insn (83.60%)
396,100,764 branches # 464.786 M/sec (83.18%)
1,892,879 branch-misses # 0.48% of all branches (83.77%)

0.906939283 seconds time elapsed

0.795226000 seconds user
0.059521000 seconds sys
>>>

If there is any troubleshooting or important information
I could provide, please let me know.

I have noticed that the clock speeds tend to be much lower
on the new Linux kernel, however, I don't know the cause of it.
All the system data (including e.g. CPU governor configuration)
stays the same.

Yours, Kamila Szewczyk.

-- Package-specific info:
** Version:
Linux version 6.0.0-6-amd64 (debian...@lists.debian.org) (gcc-12 (Debian 12.2.0-9.1) 12.2.0, GNU ld (GNU Binutils for Debian) 2.39) #1 SMP PREEMPT_DYNAMIC Debian 6.0.12-1 (2022-12-09)

** Command line:
BOOT_IMAGE=/vmlinuz-6.0.0-6-amd64 root=/dev/mapper/laplace--vg-root ro quiet

** Tainted: OE (12288)
* externally-built ("out-of-tree") module was loaded
* unsigned module was loaded

** Kernel log:
[ 290.013257] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[ 290.013307] snd_hda_intel 0000:04:00.6: enabling device (0000 -> 0002)
[ 290.047532] snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 290.065328] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input12
[ 290.065411] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input13
[ 290.065458] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input14
[ 290.071995] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC257: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 290.072000] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 290.072002] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 290.072004] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 290.072004] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 290.072005] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 290.072006] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 290.088486] mt7921e 0000:03:00.0: enabling device (0000 -> 0002)
[ 290.091107] SVM: TSC scaling supported
[ 290.091110] kvm: Nested Virtualization enabled
[ 290.091111] SVM: kvm: Nested Paging enabled
[ 290.091122] SVM: Virtual VMLOAD VMSAVE supported
[ 290.091123] SVM: Virtual GIF supported
[ 290.091124] SVM: LBR virtualization supported
[ 290.106471] mt7921e 0000:03:00.0: ASIC revision: 79610010
[ 290.160357] MCE: In-kernel MCE decoding enabled.
[ 290.160695] Bluetooth: Core ver 2.22
[ 290.160721] NET: Registered PF_BLUETOOTH protocol family
[ 290.160722] Bluetooth: HCI device and connection manager initialized
[ 290.160727] Bluetooth: HCI socket layer initialized
[ 290.160730] Bluetooth: L2CAP socket layer initialized
[ 290.160734] Bluetooth: SCO socket layer initialized
[ 290.161775] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input15
[ 290.161836] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input16
[ 290.162385] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input17
[ 290.173537] usbcore: registered new interface driver btusb
[ 290.175997] bluetooth hci0: firmware: direct-loading firmware mediatek/BT_RAM_CODE_MT7961_1_2_hdr.bin
[ 290.190106] mt7921e 0000:03:00.0: firmware: direct-loading firmware mediatek/WIFI_MT7961_patch_mcu_1_2_hdr.bin
[ 290.190115] mt7921e 0000:03:00.0: HW/SW Version: 0x8a108a10, Build Time: 20221109110918a

[ 290.450963] mt7921e 0000:03:00.0: firmware: direct-loading firmware mediatek/WIFI_RAM_CODE_MT7961_1.bin
[ 290.450983] mt7921e 0000:03:00.0: WM Firmware Version: ____010000, Build Time: 20221109111005
[ 290.613925] intel_rapl_common: Found RAPL domain package
[ 290.613935] intel_rapl_common: Found RAPL domain core
[ 290.689193] EXT4-fs (nvme0n1p2): mounting ext2 file system using the ext4 subsystem
[ 290.690191] EXT4-fs (nvme0n1p2): mounted filesystem without journal. Quota mode: none.
[ 290.690206] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 290.735037] audit: type=1400 audit(1671737358.430:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=876 comm="apparmor_parser"
[ 290.735064] audit: type=1400 audit(1671737358.430:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=878 comm="apparmor_parser"
[ 290.735357] audit: type=1400 audit(1671737358.430:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=870 comm="apparmor_parser"
[ 290.735439] audit: type=1400 audit(1671737358.430:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=875 comm="apparmor_parser"
[ 290.735803] audit: type=1400 audit(1671737358.430:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=873 comm="apparmor_parser"
[ 290.735808] audit: type=1400 audit(1671737358.430:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=873 comm="apparmor_parser"
[ 290.735812] audit: type=1400 audit(1671737358.430:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=873 comm="apparmor_parser"
[ 290.735908] audit: type=1400 audit(1671737358.430:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=871 comm="apparmor_parser"
[ 290.735912] audit: type=1400 audit(1671737358.430:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=871 comm="apparmor_parser"
[ 290.737270] audit: type=1400 audit(1671737358.430:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=879 comm="apparmor_parser"
[ 290.879720] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 290.879724] Bluetooth: BNEP filters: protocol multicast
[ 290.879731] Bluetooth: BNEP socket layer initialized
[ 290.951594] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw
[ 290.978489] ucsi_acpi: probe of USBC000:00 failed with error -5
[ 290.982516] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[ 291.038825] NET: Registered PF_QIPCRTR protocol family
[ 291.154527] r8169 0000:02:00.0 enp2s0: Link is Down
[ 291.281991] mt7921e 0000:03:00.0 wlp3s0: renamed from wlan0
[ 292.818158] Bluetooth: hci0: Device setup in 2582556 usecs
[ 292.818188] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 292.887328] Bluetooth: MGMT ver 1.22
[ 292.912323] NET: Registered PF_ALG protocol family
[ 294.597545] wlp3s0: authenticate with 00:cb:7a:e8:b5:10
[ 294.618523] wlp3s0: bad VHT capabilities, disabling VHT
[ 294.650812] wlp3s0: send auth to 00:cb:7a:e8:b5:10 (try 1/3)
[ 294.656613] wlp3s0: authenticated
[ 294.698573] wlp3s0: associate with 00:cb:7a:e8:b5:10 (try 1/3)
[ 294.706656] wlp3s0: RX AssocResp from 00:cb:7a:e8:b5:10 (capab=0x1411 status=0 aid=21)
[ 294.746572] wlp3s0: associated
[ 294.953942] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 295.227625] Bluetooth: RFCOMM TTY layer initialized
[ 295.227660] Bluetooth: RFCOMM socket layer initialized
[ 295.227693] Bluetooth: RFCOMM ver 1.11
[ 297.413358] vboxdrv: loading out-of-tree module taints kernel.
[ 297.414841] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 297.538162] vboxdrv: Found 16 processor cores/threads
[ 297.560076] vboxdrv: TSC mode is Invariant, tentative frequency 1796567341 Hz
[ 297.560099] vboxdrv: Successfully loaded version 7.0.4_Debian r154605 (interface 0x00330004)
[ 297.613279] VBoxNetFlt: Successfully started.
[ 297.659916] VBoxNetAdp: Successfully started.
[ 3025.190695] ACPI Error: No handler for Region [ECSI] (000000006dd86190) [EmbeddedControl] (20220331/evregion-130)
[ 3025.190747] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20220331/exfldio-261)
[ 3025.190781] ACPI Error: Aborting method \_SB.UBTC.ECRD due to previous error (AE_NOT_EXIST) (20220331/psparse-529)
[ 3025.190830] ACPI Error: Aborting method \_SB.UBTC.NTFY due to previous error (AE_NOT_EXIST) (20220331/psparse-529)
[ 3025.190870] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q4F due to previous error (AE_NOT_EXIST) (20220331/psparse-529)
[ 3025.226362] ACPI Error: No handler for Region [ECSI] (000000006dd86190) [EmbeddedControl] (20220331/evregion-130)
[ 3025.226413] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20220331/exfldio-261)
[ 3025.226446] ACPI Error: Aborting method \_SB.UBTC.ECRD due to previous error (AE_NOT_EXIST) (20220331/psparse-529)
[ 3025.226493] ACPI Error: Aborting method \_SB.UBTC.NTFY due to previous error (AE_NOT_EXIST) (20220331/psparse-529)
[ 3025.226525] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q4F due to previous error (AE_NOT_EXIST) (20220331/psparse-529)
[ 3782.707247] show_signal: 9 callbacks suppressed
[ 3782.707272] traps: ThreadPoolForeg[6539] trap int3 ip:564225113554 sp:7f17b3bef550 error:0 in element-desktop-nightly[564221922000+75ea000]
[ 3798.975460] traps: element-desktop[6579] trap int3 ip:55766084d554 sp:7ffd68ce22b0 error:0 in element-desktop-nightly[55765d05c000+75ea000]
[ 4052.125663] traps: element-desktop[7492] trap int3 ip:5592ccdf0554 sp:7ffcbe9ee3a0 error:0 in element-desktop-nightly[5592c95ff000+75ea000]
[ 4178.165570] traps: element-desktop[8078] trap int3 ip:55562d7dd554 sp:7ffe09c50940 error:0 in element-desktop-nightly[555629fec000+75ea000]
[ 4655.787948] traps: element-desktop[8254] trap int3 ip:55d61203e05f sp:7ffccb676e80 error:0 in element-desktop-nightly[55d60e84d000+75ea000]

** Model information
sys_vendor: LENOVO
product_name: 20Y7003XPB
product_version: ThinkPad E14 Gen 3
chassis_vendor: LENOVO
chassis_version: None
bios_vendor: LENOVO
bios_version: R1OET30W (1.09 )
board_vendor: LENOVO
board_name: 20Y7003XPB
board_version: Not Defined

** Loaded modules:
vboxnetadp(OE)
vboxnetflt(OE)
vboxdrv(OE)
rfcomm
ctr
ccm
snd_seq_dummy
snd_hrtimer
snd_seq
snd_seq_device
cmac
algif_hash
algif_skcipher
af_alg
qrtr
cpufreq_ondemand
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
bnep
binfmt_misc
nls_ascii
nls_cp437
vfat
fat
intel_rapl_msr
intel_rapl_common
btusb
btrtl
btbcm
btintel
btmtk
edac_mce_amd
mt7921e
bluetooth
mt7921_common
mt76_connac_lib
snd_ctl_led
mt76
snd_hda_codec_realtek
kvm_amd
snd_hda_codec_generic
snd_hda_codec_hdmi
jitterentropy_rng
mac80211
kvm
snd_hda_intel
uvcvideo
snd_intel_dspcfg
videobuf2_vmalloc
videobuf2_memops
snd_intel_sdw_acpi
videobuf2_v4l2
drbg
snd_hda_codec
libarc4
videobuf2_common
irqbypass
videodev
ansi_cprng
snd_hda_core
thinkpad_acpi
snd_pci_acp6x
ecdh_generic
snd_pci_acp5x
snd_hwdep
mc
ecc
cfg80211
rapl
nvram
snd_pcm
snd_rn_pci_acp3x
platform_profile
snd_timer
ledtrig_audio
snd_acp_config
ucsi_acpi
snd_soc_acpi
wmi_bmof
ccp
snd
typec_ucsi
rng_core
snd_pci_acp3x
roles
soundcore
sp5100_tco
k10temp
watchdog
typec
rfkill
ac
joydev
serio_raw
evdev
parport_pc
ppdev
lp
parport
fuse
efi_pstore
configfs
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
dm_crypt
dm_mod
amdgpu
gpu_sched
drm_buddy
i2c_algo_bit
drm_display_helper
cec
rc_core
crc32_pclmul
drm_ttm_helper
crc32c_intel
ttm
ghash_clmulni_intel
nvme
drm_kms_helper
nvme_core
xhci_pci
xhci_hcd
t10_pi
drm
r8169
aesni_intel
usbcore
realtek
mdio_devres
psmouse
crc64_rocksoft_generic
crypto_simd
libphy
cryptd
crc64_rocksoft
crc_t10dif
crct10dif_generic
i2c_piix4
crct10dif_pclmul
usb_common
crc64
crct10dif_common
wmi
video
battery
i2c_scmi
button
sha512_ssse3
sha512_generic

** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne Root Complex [1022:1630]
Subsystem: Lenovo Renoir/Cezanne Root Complex [17aa:5097]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne IOMMU [1022:1631]
Subsystem: Lenovo Renoir/Cezanne IOMMU [17aa:5097]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ -2147483648
Capabilities: <access denied>

00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge [1022:1632]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 0

00:02.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge [1022:1632]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 1

00:02.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge [1022:1634] (prog-if 00 [Normal decode])
Subsystem: Lenovo Renoir/Cezanne PCIe GPP Bridge [17aa:5097]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 26
IOMMU group: 2
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: [disabled] [32-bit]
Memory behind bridge: fd500000-fd5fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:02.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge [1022:1634] (prog-if 00 [Normal decode])
Subsystem: Lenovo Renoir/Cezanne PCIe GPP Bridge [17aa:5097]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 27
IOMMU group: 3
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 2000-2fff [size=4K] [16-bit]
Memory behind bridge: fd400000-fd4fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:02.3 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge [1022:1634] (prog-if 00 [Normal decode])
Subsystem: Lenovo Renoir/Cezanne PCIe GPP Bridge [17aa:5097]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 28
IOMMU group: 4
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 3000-3fff [size=4K] [16-bit]
Memory behind bridge: d0000000-d01fffff [size=2M] [32-bit]
Prefetchable memory behind bridge: 470200000-4703fffff [size=2M] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:08.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge [1022:1632]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 5

00:08.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus [1022:1635] (prog-if 00 [Normal decode])
Subsystem: Device [5097:17aa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
IOMMU group: 5
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 1000-1fff [size=4K] [16-bit]
Memory behind bridge: fd000000-fd3fffff [size=4M] [32-bit]
Prefetchable memory behind bridge: 460000000-4701fffff [size=258M] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 51)
Subsystem: Lenovo FCH SMBus Controller [17aa:5097]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 6
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco

00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e] (rev 51)
Subsystem: Lenovo FCH LPC Bridge [17aa:5097]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 6

00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 0 [1022:1448]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 7

00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 1 [1022:1449]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 7

00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 2 [1022:144a]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 7

00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 3 [1022:144b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 7
Kernel driver in use: k10temp
Kernel modules: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 4 [1022:144c]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 7

00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 5 [1022:144d]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 7

00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 6 [1022:144e]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 7

00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 7 [1022:144f]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 7

01:00.0 Non-Volatile memory controller [0108]: SK hynix Gold P31/PC711 NVMe Solid State Drive [1c5c:174a] (prog-if 02 [NVM Express])
Subsystem: SK hynix Gold P31/PC711 NVMe Solid State Drive [1c5c:174a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 50
NUMA node: 0
IOMMU group: 8
Region 0: Memory at fd500000 (64-bit, non-prefetchable) [size=16K]
Region 2: Memory at fd505000 (32-bit, non-prefetchable) [size=4K]
Region 3: Memory at fd504000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)
Subsystem: Lenovo RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [17aa:5097]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 30
IOMMU group: 9
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at fd404000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at fd400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169

03:00.0 Network controller [0280]: MEDIATEK Corp. MT7921 802.11ax PCI Express Wireless Network Adapter [14c3:7961]
Subsystem: Lenovo MT7921 802.11ax PCI Express Wireless Network Adapter [17aa:e0bc]
Physical Slot: 0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 75
IOMMU group: 10
Region 0: Memory at 470200000 (64-bit, prefetchable) [size=1M]
Region 2: Memory at 470300000 (64-bit, prefetchable) [size=16K]
Region 4: Memory at 470304000 (64-bit, prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mt7921e
Kernel modules: mt7921e

04:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Lucienne [1002:164c] (rev c1) (prog-if 00 [VGA controller])
Subsystem: Lenovo Lucienne [17aa:5097]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 40
IOMMU group: 5
Region 0: Memory at 460000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at 470000000 (64-bit, prefetchable) [size=2M]
Region 4: I/O ports at 1000 [size=256]
Region 5: Memory at fd300000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
Kernel driver in use: amdgpu
Kernel modules: amdgpu

04:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Renoir Radeon High Definition Audio Controller [1002:1637]
Subsystem: Lenovo Renoir Radeon High Definition Audio Controller [17aa:5097]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 72
IOMMU group: 5
Region 0: Memory at fd3c8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

04:00.2 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor [1022:15df]
Subsystem: Lenovo Family 17h (Models 10h-1fh) Platform Security Processor [17aa:5097]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 50
IOMMU group: 5
Region 2: Memory at fd200000 (32-bit, non-prefetchable) [size=1M]
Region 5: Memory at fd3cc000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ccp
Kernel modules: ccp

04:00.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1 [1022:1639] (prog-if 30 [XHCI])
Subsystem: Lenovo Renoir/Cezanne USB 3.1 [17aa:5097]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 31
IOMMU group: 5
Region 0: Memory at fd000000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci

04:00.4 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1 [1022:1639] (prog-if 30 [XHCI])
Subsystem: Lenovo Renoir/Cezanne USB 3.1 [17aa:5097]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 40
IOMMU group: 5
Region 0: Memory at fd100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci

04:00.5 Multimedia controller [0480]: Advanced Micro Devices, Inc. [AMD] ACP/ACP3X/ACP6x Audio Coprocessor [1022:15e2] (rev 01)
Subsystem: Lenovo ACP/ACP3X/ACP6x Audio Coprocessor [17aa:5097]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 71
IOMMU group: 5
Region 0: Memory at fd380000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
Kernel modules: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x

04:00.6 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 17h/19h HD Audio Controller [1022:15e3]
Subsystem: Lenovo Family 17h/19h HD Audio Controller [17aa:5097]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 73
IOMMU group: 5
Region 0: Memory at fd3c0000 (32-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel


** USB devices:
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 0489:e0cd Foxconn / Hon Hai Wireless_Device
Bus 003 Device 002: ID 04f3:0c4b Elan Microelectronics Corp. ELAN:Fingerprint
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 04f2:b6be Chicony Electronics Co., Ltd Integrated Camera
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: bookworm/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 6.0.0-6-amd64 (SMP w/16 CPU threads; PREEMPT)
Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-6.0.0-6-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.142
ii kmod 30+20221128-1
ii linux-base 4.9

Versions of packages linux-image-6.0.0-6-amd64 recommends:
ii apparmor 3.0.8-1
ii firmware-linux-free 20200122-1

Versions of packages linux-image-6.0.0-6-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.06-7
pn linux-doc-6.0 <none>

Versions of packages linux-image-6.0.0-6-amd64 is related to:
ii firmware-amd-graphics 20221214-2
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20221214-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20221214-2
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>

-- no debconf information

Salvatore Bonaccorso

unread,
Dec 22, 2022, 5:00:03 PM12/22/22
to
Hi,
As we will soonish move to the 6.1.y series (which as LTS kernel
upstream is aimed to be the one we will use for bookworm), do you
observe the same regression when moving to the kernel available in
experimental? (Ideally test the just uploaded 6.1.1-1~exp1 once it is
built).

If it is still reproducible with latest kernel, would you be able to
bisect the changes between 6.0.8 and 6.0.12 to isolate the change
introducing the regression for you?

The following resource might be helpful for the later case:
https://wiki.debian.org/DebianKernel/GitBisect

Regards,
Salvatore

Diederik de Haas

unread,
Dec 22, 2022, 5:10:04 PM12/22/22
to
On Thursday, 22 December 2022 22:20:44 CET Kamila Szewczyk wrote:
> [ 297.413358] vboxdrv: loading out-of-tree module taints kernel.

If you're indeed testing this inside VirtualBox, do look whether there's an
update for that (too).

> [ 3025.190695] ACPI Error: No handler for Region [ECSI] (000000006dd86190)
> [EmbeddedControl] (20220331/evregion-130) [ 3025.190747] ACPI Error: Region
> EmbeddedControl (ID=3) has no handler (20220331/exfldio-261) [ 3025.190781]
> ACPI Error: Aborting method \_SB.UBTC.ECRD due to previous error
> (AE_NOT_EXIST) (20220331/psparse-529) [ 3025.190830] ACPI Error: Aborting
> method \_SB.UBTC.NTFY due to previous error (AE_NOT_EXIST)

I also noticed several ACPI errors. I don't know if that's on the host or also
inside VirtualBox, but it may be worth looking into that.
And also comparing that with the 'old' kernel which did perform 'properly'.
signature.asc

Palaiologos

unread,
Dec 22, 2022, 5:20:03 PM12/22/22
to
> If you're indeed testing this inside VirtualBox, do look whether there's an update for that (too).

I am testing on bare metal.

> I also noticed several ACPI errors. I don't know if that's on the host or also
inside VirtualBox, but it may be worth looking into that. And also
comparing that with the 'old' kernel which did perform 'properly'.

The old kernel also logs these messages.

As for the 6.1.y series kernel, the installation fails on my machine:

<<<
sudo apt install linux-image-amd64=6.1~rc8-1~exp1
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following additional packages will be installed:
linux-image-6.1.0-0-amd64
Suggested packages:
linux-doc-6.1 debian-kernel-handbook
The following NEW packages will be installed:
linux-image-6.1.0-0-amd64
The following packages will be upgraded:
linux-image-amd64
1 upgraded, 1 newly installed, 0 to remove and 1 not upgraded.
Need to get 71.9 MB of archives.
After this operation, 481 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://deb.debian.org/debian experimental/main amd64
linux-image-6.1.0-0-amd64 amd64 6.1~rc8-1~exp1 [71.9 MB]
Get:2 http://deb.debian.org/debian experimental/main amd64
linux-image-amd64 amd64 6.1~rc8-1~exp1 [1,484 B]
Fetched 71.9 MB in 5s (14.4 MB/s)
Reading changelogs... Done
Selecting previously unselected package linux-image-6.1.0-0-amd64.
(Reading database ... 250232 files and directories currently installed.)
Preparing to unpack .../linux-image-6.1.0-0-amd64_6.1~rc8-1~exp1_amd64.deb ...
Unpacking linux-image-6.1.0-0-amd64 (6.1~rc8-1~exp1) ...
Preparing to unpack .../linux-image-amd64_6.1~rc8-1~exp1_amd64.deb ...
Unpacking linux-image-amd64 (6.1~rc8-1~exp1) over (6.0.12-1) ...
Setting up linux-image-6.1.0-0-amd64 (6.1~rc8-1~exp1) ...
I: /vmlinuz.old is now a symlink to boot/vmlinuz-6.0.0-6-amd64
I: /initrd.img.old is now a symlink to boot/initrd.img-6.0.0-6-amd64
I: /vmlinuz is now a symlink to boot/vmlinuz-6.1.0-0-amd64
I: /initrd.img is now a symlink to boot/initrd.img-6.1.0-0-amd64
/etc/kernel/postinst.d/dkms:
dkms: running auto installation service for kernel 6.1.0-0-amd64:ACPI
disabled in this kernel, not building module.
ACPI disabled in this kernel, not building module.
Sign command: /lib/modules/6.1.0-0-amd64/build/scripts/sign-file
Binary /lib/modules/6.1.0-0-amd64/build/scripts/sign-file not found,
modules won't be signed
ACPI disabled in this kernel, not building module.
Error! The /var/lib/dkms/acpi-call/1.2.2/6.1.0-0-amd64/x86_64/dkms.conf
for module acpi-call includes a BUILD_EXCLUSIVE directive which does
not match this kernel/arch/config.
This indicates that it should not be built.
Sign command: /lib/modules/6.1.0-0-amd64/build/scripts/sign-file
Binary /lib/modules/6.1.0-0-amd64/build/scripts/sign-file not found,
modules won't be signed
Error! Your kernel headers for kernel 6.1.0-0-amd64 cannot be found at
/lib/modules/6.1.0-0-amd64/build or /lib/modules/6.1.0-0-amd64/source.
Please install the linux-headers-6.1.0-0-amd64 package or use the
--kernelsourcedir option to tell DKMS where it's located.
Sign command: /lib/modules/6.1.0-0-amd64/build/scripts/sign-file
Binary /lib/modules/6.1.0-0-amd64/build/scripts/sign-file not found,
modules won't be signed
Error! Your kernel headers for kernel 6.1.0-0-amd64 cannot be found at
/lib/modules/6.1.0-0-amd64/build or /lib/modules/6.1.0-0-amd64/source.
Please install the linux-headers-6.1.0-0-amd64 package or use the
--kernelsourcedir option to tell DKMS where it's located.
Error! One or more modules failed to install during autoinstall.
Refer to previous errors for more information.
failed!
run-parts: /etc/kernel/postinst.d/dkms exited with return code 11
dpkg: error processing package linux-image-6.1.0-0-amd64 (--configure):
installed linux-image-6.1.0-0-amd64 package post-installation script
subprocess returned error exit status 1
dpkg: dependency problems prevent configuration of linux-image-amd64:
linux-image-amd64 depends on linux-image-6.1.0-0-amd64 (=
6.1~rc8-1~exp1); however:
Package linux-image-6.1.0-0-amd64 is not configured yet.

dpkg: error processing package linux-image-amd64 (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
linux-image-6.1.0-0-amd64
linux-image-amd64
E: Sub-process /usr/bin/dpkg returned an error code (1)
>>>

After manually installing the headers package, the installation
succeeded. I booted into the new kernel and its performance matches
the old working kernel (6.0.8), meaning that the regression seems to
have been fixed.

Yours, Kamila Szewczyk
0 new messages