Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Bug#658778: linux-image-3.2.0-1-amd64: Suspend from X session hangs Asus laptop.
0 views
Skip to first unread message
Boris Barbour
Feb 5, 2012, 7:20:01 PM2/5/12
to
Package: linux-2.6
Version: 3.2.2-1
Severity: normal
Tags: upstream
Dear Maintainer,
On a new, cheap Asus laptop ("Model X54L"), suspend to RAM does not work under some conditions. The
screen goes blank, except for a static cursor in the top left corner. The hard disk light stays on.
No further response can be elicited from the computer (caps lock does nothing, power button can only
switch off, impossible to ssh in).
Suspend (triggered by closing the lid) *does* work from console when X is not running and also from
the kdm prompt. If a KDE session is open, however, suspend hangs as described. I attach the
pm-suspend.log with verbose debugging information for this case. Gnome is no better at suspending.
Disabling KMS does not prevent the hang, although it then annoyingly occurs in the middle of the
goodbye sound from KDE, leaving that ringing for ever.
Blacklisting the ath and related modules does not prevent the hang; similarly for snd related
modules and for atl1c. Simply disabling networking and wireless in the networkmanager applet,
even across boots, does not help.
-- Package-specific info:
** Version:
Linux version 3.2.0-1-amd64 (Debian 3.2.2-1) (b...@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-12) ) #1 SMP Wed Feb 1 08:56:58 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-amd64 root=UUID=0164cad1-817d-4a86-9d84-dcd337e0350d ro quiet
** Not tainted
** Kernel log:
[ 2.580073] PM: Starting manual resume from disk
[ 2.580078] PM: Hibernation image partition 8:6 present
[ 2.580079] PM: Looking for hibernation image.
[ 2.605141] PM: Image not found (code -22)
[ 2.605144] PM: Hibernation image not present or could not be loaded.
[ 2.675117] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.856439] udevd[281]: starting version 175
[ 5.758878] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 5.780388] ACPI: Lid Switch [LID]
[ 5.780460] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 5.780466] ACPI: Sleep Button [SLPB]
[ 5.780514] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.780517] ACPI: Power Button [PWRF]
[ 5.918935] ACPI: Battery Slot [BAT0] (battery present)
[ 6.035573] ACPI: AC Adapter [AC0] (on-line)
[ 6.053938] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.070716] wmi: Mapper loaded
[ 6.105769] iTCO_vendor_support: vendor-support=0
[ 6.106855] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 6.106945] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 6.107088] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.203062] cfg80211: Calling CRDA to update world regulatory domain
[ 6.432667] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.436201] psmouse serio4: elantech: assuming hardware version 3 (with firmware version 0x450f01)
[ 6.466565] psmouse serio4: elantech: Synaptics capabilities query result 0x78, 0x15, 0x0c.
[ 6.545383] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input5
[ 6.634914] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.634921] ACPI: resource 0000:00:1f.3 [io 0xe040-0xe05f] conflicts with ACPI region SMBI [io 0xe040-0xe04f]
[ 6.634923] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.796144] asus_wmi: ASUS WMI generic driver loaded
[ 6.797160] asus_wmi: Initialization: 0x1
[ 6.797196] asus_wmi: BIOS WMI version: 7.6
[ 6.797249] asus_wmi: SFUN value: 0x1a0877
[ 6.797980] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input6
[ 6.861634] asus_wmi: Backlight controlled by ACPI video driver
[ 6.893522] [drm] Initialized drm 1.1.0 20060810
[ 6.949161] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.949176] ath9k 0000:02:00.0: setting latency timer to 64
[ 6.998722] ath: EEPROM regdomain: 0x60
[ 6.998725] ath: EEPROM indicates we should expect a direct regpair map
[ 6.998728] ath: Country alpha2 being used: 00
[ 6.998730] ath: Regpair used: 0x60
[ 7.066323] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 7.066795] Registered led device: ath9k-phy0
[ 7.066803] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900050a0000, irq=17
[ 7.276347] Linux media interface: v0.10
[ 7.300226] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.300231] i915 0000:00:02.0: setting latency timer to 64
[ 7.313429] Linux video capture interface: v2.00
[ 7.360166] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 7.360173] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.360175] [drm] Driver supports precise vblank timestamp query.
[ 7.360206] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.367717] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5710)
[ 7.374125] input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input7
[ 7.374233] usbcore: registered new interface driver uvcvideo
[ 7.374235] USB Video Class driver (1.1.1)
[ 7.964091] fbcon: inteldrmfb (fb0) is primary device
[ 8.247469] Console: switching to colour frame buffer device 170x48
[ 8.251532] fb0: inteldrmfb frame buffer device
[ 8.251533] drm: registered panic notifier
[ 8.253398] ACPI Warning: _BQC returned an invalid level (20110623/video-472)
[ 8.253777] acpi device:45: registered as cooling_device2
[ 8.254164] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 8.254210] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 8.254263] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.254305] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8.254366] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 8.254396] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 8.358110] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.358181] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.789387] Adding 6572028k swap on /dev/sda6. Priority:-1 extents:1 across:6572028k
[ 9.793047] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 10.055690] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 10.245896] loop: module loaded
[ 11.519040] RPC: Registered named UNIX socket transport module.
[ 11.519043] RPC: Registered udp transport module.
[ 11.519045] RPC: Registered tcp transport module.
[ 11.519047] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.622368] FS-Cache: Loaded
[ 11.679466] FS-Cache: Netfs 'nfs' registered for caching
[ 11.691140] Installing knfsd (copyright (C) 1996 ok...@monad.swb.de).
[ 12.105694] fuse init (API version 7.17)
[ 15.447800] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 17.386803] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.395543] atl1c 0000:04:00.0: irq 50 for MSI/MSI-X
[ 17.395672] atl1c 0000:04:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 19.362126] Bluetooth: Core ver 2.16
[ 19.362144] NET: Registered protocol family 31
[ 19.362146] Bluetooth: HCI device and connection manager initialized
[ 19.362149] Bluetooth: HCI socket layer initialized
[ 19.362150] Bluetooth: L2CAP socket layer initialized
[ 19.362155] Bluetooth: SCO socket layer initialized
[ 19.406766] Bluetooth: RFCOMM TTY layer initialized
[ 19.406771] Bluetooth: RFCOMM socket layer initialized
[ 19.406772] Bluetooth: RFCOMM ver 1.11
[ 19.412018] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.412021] Bluetooth: BNEP filters: protocol multicast
[ 20.658916] lp: driver loaded but no devices found
[ 20.662772] ppdev: user-space parallel port driver
** Model information
sys_vendor: ASUSTeK Computer Inc.
product_name: K54L
product_version: 1.0
chassis_vendor: ASUSTeK Computer Inc.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: K54L.204
board_vendor: ASUSTeK Computer Inc.
board_name: K54L
board_version: 1.0
** Loaded modules:
acpi_cpufreq
mperf
cpufreq_userspace
cpufreq_powersave
cpufreq_stats
cpufreq_conservative
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
binfmt_misc
uinput
fuse
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
loop
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
uvcvideo
snd_hwdep
videodev
i915
media
v4l2_compat_ioctl32
snd_pcm
snd_seq
snd_timer
arc4
snd_seq_device
ath9k
drm_kms_helper
mac80211
drm
ath9k_common
asus_nb_wmi
asus_wmi
sparse_keymap
snd
i2c_i801
i2c_algo_bit
ath9k_hw
i2c_core
joydev
pci_hotplug
ath
evdev
soundcore
cfg80211
psmouse
serio_raw
iTCO_wdt
iTCO_vendor_support
snd_page_alloc
wmi
pcspkr
ac
video
battery
rfkill
power_supply
processor
button
ext4
mbcache
jbd2
crc16
sr_mod
sd_mod
cdrom
crc_t10dif
thermal
thermal_sys
xhci_hcd
ahci
libahci
atl1c
libata
ehci_hcd
scsi_mod
usbcore
usb_common
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
#NetworkManager#iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 14:da:e9:bd:95:ff brd ff:ff:ff:ff:ff:ff
inet 192.168.0.14/24 brd 192.168.0.255 scope global eth0
inet6 2a01:e35:2e39:4970:16da:e9ff:febd:95ff/64 scope global dynamic
valid_lft 85965sec preferred_lft 85965sec
inet6 fe80::16da:e9ff:febd:95ff/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether 38:59:f9:72:c4:56 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 10436 138 0 0 0 0 0 0 10436 138 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth0: 2622179 2435 0 0 0 0 0 22 294041 2101 0 0 0 0 1 0
*** Protocol statistics:
Ip:
1038 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
1036 incoming packets delivered
888 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
57 active connections openings
13 passive connection openings
4 failed connection attempts
1 connection resets received
0 connections established
2362 segments received
1974 segments send out
0 segments retransmited
0 bad segments received.
41 resets sent
Udp:
220 packets received
0 packets to unknown port received.
0 packet receive errors
196 packets sent
UdpLite:
TcpExt:
33 TCP sockets finished time wait in fast timer
33 delayed acks sent
1699 packet headers predicted
122 acknowledgments not containing data payload received
3 predicted acknowledgments
4 connections reset due to unexpected data
1 connections reset due to early user close
IpExt:
InMcastPkts: 50
OutMcastPkts: 45
InBcastPkts: 30
OutBcastPkts: 7
InOctets: 845757
OutOctets: 96260
InMcastOctets: 7580
OutMcastOctets: 5453
InBcastOctets: 5503
OutBcastOctets: 328
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0106] (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at dd000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at e000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dfc0b000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfc08000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at dfc00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: df200000-dfbfffff
Prefetchable memory behind bridge: 00000000d2100000-00000000d2afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: de800000-df1fffff
Prefetchable memory behind bridge: 00000000d1600000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: dde00000-de7fffff
Prefetchable memory behind bridge: 00000000d0b00000-00000000d14fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dd400000-dddfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at dfc07000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 47
Region 0: I/O ports at e0b0 [size=8]
Region 1: I/O ports at e0a0 [size=4]
Region 2: I/O ports at e090 [size=8]
Region 3: I/O ports at e080 [size=4]
Region 4: I/O ports at e060 [size=32]
Region 5: Memory at dfc06000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at dfc05000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at e040 [size=32]
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: Foxconn International, Inc. Device [105b:e049]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at de800000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
03:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1059]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at dde00000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
04:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0)
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at dd400000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at a000 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 13d3:5710 IMC Networks
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (900, 'testing'), (800, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1
Versions of packages linux-image-3.2.0-1-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.2.0-1-amd64 suggests:
pn grub-pc 1.99-14
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-1-amd64/postinst/depmod-error-initrd-3.2.0-1-amd64: false
linux-image-3.2.0-1-amd64/postinst/missing-firmware-3.2.0-1-amd64:
linux-image-3.2.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-1-amd64/prerm/removing-running-kernel-3.2.0-1-amd64: true
Version: 3.2.2-1
Severity: normal
Tags: upstream
Dear Maintainer,
On a new, cheap Asus laptop ("Model X54L"), suspend to RAM does not work under some conditions. The
screen goes blank, except for a static cursor in the top left corner. The hard disk light stays on.
No further response can be elicited from the computer (caps lock does nothing, power button can only
switch off, impossible to ssh in).
Suspend (triggered by closing the lid) *does* work from console when X is not running and also from
the kdm prompt. If a KDE session is open, however, suspend hangs as described. I attach the
pm-suspend.log with verbose debugging information for this case. Gnome is no better at suspending.
Disabling KMS does not prevent the hang, although it then annoyingly occurs in the middle of the
goodbye sound from KDE, leaving that ringing for ever.
Blacklisting the ath and related modules does not prevent the hang; similarly for snd related
modules and for atl1c. Simply disabling networking and wireless in the networkmanager applet,
even across boots, does not help.
-- Package-specific info:
** Version:
Linux version 3.2.0-1-amd64 (Debian 3.2.2-1) (b...@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-12) ) #1 SMP Wed Feb 1 08:56:58 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-amd64 root=UUID=0164cad1-817d-4a86-9d84-dcd337e0350d ro quiet
** Not tainted
** Kernel log:
[ 2.580073] PM: Starting manual resume from disk
[ 2.580078] PM: Hibernation image partition 8:6 present
[ 2.580079] PM: Looking for hibernation image.
[ 2.605141] PM: Image not found (code -22)
[ 2.605144] PM: Hibernation image not present or could not be loaded.
[ 2.675117] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.856439] udevd[281]: starting version 175
[ 5.758878] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 5.780388] ACPI: Lid Switch [LID]
[ 5.780460] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 5.780466] ACPI: Sleep Button [SLPB]
[ 5.780514] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.780517] ACPI: Power Button [PWRF]
[ 5.918935] ACPI: Battery Slot [BAT0] (battery present)
[ 6.035573] ACPI: AC Adapter [AC0] (on-line)
[ 6.053938] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.070716] wmi: Mapper loaded
[ 6.105769] iTCO_vendor_support: vendor-support=0
[ 6.106855] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 6.106945] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 6.107088] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.203062] cfg80211: Calling CRDA to update world regulatory domain
[ 6.432667] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.436201] psmouse serio4: elantech: assuming hardware version 3 (with firmware version 0x450f01)
[ 6.466565] psmouse serio4: elantech: Synaptics capabilities query result 0x78, 0x15, 0x0c.
[ 6.545383] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input5
[ 6.634914] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.634921] ACPI: resource 0000:00:1f.3 [io 0xe040-0xe05f] conflicts with ACPI region SMBI [io 0xe040-0xe04f]
[ 6.634923] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.796144] asus_wmi: ASUS WMI generic driver loaded
[ 6.797160] asus_wmi: Initialization: 0x1
[ 6.797196] asus_wmi: BIOS WMI version: 7.6
[ 6.797249] asus_wmi: SFUN value: 0x1a0877
[ 6.797980] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input6
[ 6.861634] asus_wmi: Backlight controlled by ACPI video driver
[ 6.893522] [drm] Initialized drm 1.1.0 20060810
[ 6.949161] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.949176] ath9k 0000:02:00.0: setting latency timer to 64
[ 6.998722] ath: EEPROM regdomain: 0x60
[ 6.998725] ath: EEPROM indicates we should expect a direct regpair map
[ 6.998728] ath: Country alpha2 being used: 00
[ 6.998730] ath: Regpair used: 0x60
[ 7.066323] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 7.066795] Registered led device: ath9k-phy0
[ 7.066803] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900050a0000, irq=17
[ 7.276347] Linux media interface: v0.10
[ 7.300226] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.300231] i915 0000:00:02.0: setting latency timer to 64
[ 7.313429] Linux video capture interface: v2.00
[ 7.360166] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 7.360173] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.360175] [drm] Driver supports precise vblank timestamp query.
[ 7.360206] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.367717] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5710)
[ 7.374125] input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input7
[ 7.374233] usbcore: registered new interface driver uvcvideo
[ 7.374235] USB Video Class driver (1.1.1)
[ 7.964091] fbcon: inteldrmfb (fb0) is primary device
[ 8.247469] Console: switching to colour frame buffer device 170x48
[ 8.251532] fb0: inteldrmfb frame buffer device
[ 8.251533] drm: registered panic notifier
[ 8.253398] ACPI Warning: _BQC returned an invalid level (20110623/video-472)
[ 8.253777] acpi device:45: registered as cooling_device2
[ 8.254164] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 8.254210] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 8.254263] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.254305] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8.254366] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 8.254396] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 8.358110] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.358181] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.789387] Adding 6572028k swap on /dev/sda6. Priority:-1 extents:1 across:6572028k
[ 9.793047] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 10.055690] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 10.245896] loop: module loaded
[ 11.519040] RPC: Registered named UNIX socket transport module.
[ 11.519043] RPC: Registered udp transport module.
[ 11.519045] RPC: Registered tcp transport module.
[ 11.519047] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.622368] FS-Cache: Loaded
[ 11.679466] FS-Cache: Netfs 'nfs' registered for caching
[ 11.691140] Installing knfsd (copyright (C) 1996 ok...@monad.swb.de).
[ 12.105694] fuse init (API version 7.17)
[ 15.447800] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 17.386803] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.395543] atl1c 0000:04:00.0: irq 50 for MSI/MSI-X
[ 17.395672] atl1c 0000:04:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 19.362126] Bluetooth: Core ver 2.16
[ 19.362144] NET: Registered protocol family 31
[ 19.362146] Bluetooth: HCI device and connection manager initialized
[ 19.362149] Bluetooth: HCI socket layer initialized
[ 19.362150] Bluetooth: L2CAP socket layer initialized
[ 19.362155] Bluetooth: SCO socket layer initialized
[ 19.406766] Bluetooth: RFCOMM TTY layer initialized
[ 19.406771] Bluetooth: RFCOMM socket layer initialized
[ 19.406772] Bluetooth: RFCOMM ver 1.11
[ 19.412018] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.412021] Bluetooth: BNEP filters: protocol multicast
[ 20.658916] lp: driver loaded but no devices found
[ 20.662772] ppdev: user-space parallel port driver
** Model information
sys_vendor: ASUSTeK Computer Inc.
product_name: K54L
product_version: 1.0
chassis_vendor: ASUSTeK Computer Inc.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: K54L.204
board_vendor: ASUSTeK Computer Inc.
board_name: K54L
board_version: 1.0
** Loaded modules:
acpi_cpufreq
mperf
cpufreq_userspace
cpufreq_powersave
cpufreq_stats
cpufreq_conservative
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
binfmt_misc
uinput
fuse
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
loop
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
uvcvideo
snd_hwdep
videodev
i915
media
v4l2_compat_ioctl32
snd_pcm
snd_seq
snd_timer
arc4
snd_seq_device
ath9k
drm_kms_helper
mac80211
drm
ath9k_common
asus_nb_wmi
asus_wmi
sparse_keymap
snd
i2c_i801
i2c_algo_bit
ath9k_hw
i2c_core
joydev
pci_hotplug
ath
evdev
soundcore
cfg80211
psmouse
serio_raw
iTCO_wdt
iTCO_vendor_support
snd_page_alloc
wmi
pcspkr
ac
video
battery
rfkill
power_supply
processor
button
ext4
mbcache
jbd2
crc16
sr_mod
sd_mod
cdrom
crc_t10dif
thermal
thermal_sys
xhci_hcd
ahci
libahci
atl1c
libata
ehci_hcd
scsi_mod
usbcore
usb_common
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
#NetworkManager#iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 14:da:e9:bd:95:ff brd ff:ff:ff:ff:ff:ff
inet 192.168.0.14/24 brd 192.168.0.255 scope global eth0
inet6 2a01:e35:2e39:4970:16da:e9ff:febd:95ff/64 scope global dynamic
valid_lft 85965sec preferred_lft 85965sec
inet6 fe80::16da:e9ff:febd:95ff/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether 38:59:f9:72:c4:56 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 10436 138 0 0 0 0 0 0 10436 138 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth0: 2622179 2435 0 0 0 0 0 22 294041 2101 0 0 0 0 1 0
*** Protocol statistics:
Ip:
1038 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
1036 incoming packets delivered
888 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
57 active connections openings
13 passive connection openings
4 failed connection attempts
1 connection resets received
0 connections established
2362 segments received
1974 segments send out
0 segments retransmited
0 bad segments received.
41 resets sent
Udp:
220 packets received
0 packets to unknown port received.
0 packet receive errors
196 packets sent
UdpLite:
TcpExt:
33 TCP sockets finished time wait in fast timer
33 delayed acks sent
1699 packet headers predicted
122 acknowledgments not containing data payload received
3 predicted acknowledgments
4 connections reset due to unexpected data
1 connections reset due to early user close
IpExt:
InMcastPkts: 50
OutMcastPkts: 45
InBcastPkts: 30
OutBcastPkts: 7
InOctets: 845757
OutOctets: 96260
InMcastOctets: 7580
OutMcastOctets: 5453
InBcastOctets: 5503
OutBcastOctets: 328
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0106] (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at dd000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at e000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dfc0b000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfc08000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at dfc00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: df200000-dfbfffff
Prefetchable memory behind bridge: 00000000d2100000-00000000d2afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: de800000-df1fffff
Prefetchable memory behind bridge: 00000000d1600000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: dde00000-de7fffff
Prefetchable memory behind bridge: 00000000d0b00000-00000000d14fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dd400000-dddfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at dfc07000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 47
Region 0: I/O ports at e0b0 [size=8]
Region 1: I/O ports at e0a0 [size=4]
Region 2: I/O ports at e090 [size=8]
Region 3: I/O ports at e080 [size=4]
Region 4: I/O ports at e060 [size=32]
Region 5: Memory at dfc06000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at dfc05000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at e040 [size=32]
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: Foxconn International, Inc. Device [105b:e049]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at de800000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
03:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1059]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at dde00000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
04:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0)
Subsystem: ASUSTeK Computer Inc. Device [1043:13c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at dd400000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at a000 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 13d3:5710 IMC Networks
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (900, 'testing'), (800, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1
Versions of packages linux-image-3.2.0-1-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.2.0-1-amd64 suggests:
pn grub-pc 1.99-14
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-1-amd64/postinst/depmod-error-initrd-3.2.0-1-amd64: false
linux-image-3.2.0-1-amd64/postinst/missing-firmware-3.2.0-1-amd64:
linux-image-3.2.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-1-amd64/prerm/removing-running-kernel-3.2.0-1-amd64: true
Jonathan Nieder
Feb 6, 2012, 12:00:01 AM2/6/12
to
Hi Boris,
Boris Barbour wrote:
> On a new, cheap Asus laptop ("Model X54L"), suspend to RAM does not
> work under some conditions.
Thanks for reporting it. Is this a regression? Does suspend-to-disk
(triggered with
echo disk >/sys/power/state
) work? If you have time to follow the instructions from
basic-pm-debugging.txt[1] to narrow down the cause, that would be very
useful.
Hope that helps,
Jonathan
[1] http://www.kernel.org/doc/Documentation/power/basic-pm-debugging.txt
also available from Documentation/power in the documentation dir of
the linux-doc-3.2 package
--
To UNSUBSCRIBE, email to debian-bugs-...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listm...@lists.debian.org
Boris Barbour wrote:
> On a new, cheap Asus laptop ("Model X54L"), suspend to RAM does not
> work under some conditions.
(triggered with
echo disk >/sys/power/state
) work? If you have time to follow the instructions from
basic-pm-debugging.txt[1] to narrow down the cause, that would be very
useful.
Hope that helps,
Jonathan
[1] http://www.kernel.org/doc/Documentation/power/basic-pm-debugging.txt
also available from Documentation/power in the documentation dir of
the linux-doc-3.2 package
--
To UNSUBSCRIBE, email to debian-bugs-...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listm...@lists.debian.org
Boris Barbour
Feb 6, 2012, 8:10:03 PM2/6/12
to
Thanks for the quick reply, Jonathan.
> Is this a regression?
Not really (the machine is new). I tried older debian 5.09 and 6.03 live cds.
With 6.03 suspending from a session worked under some conditions (lid) but not
all (menu).
> Does suspend-to-disk
> (triggered with
>
> echo disk >/sys/power/state
This doesn't work.
> ) work? If you have time to follow the instructions from
> basic-pm-debugging.txt[1] to narrow down the cause, that would be very
> useful.
Thanks for the pointer! For some reason I didn't find it while searching
around (we beginners don't know to search for "pm-" instead of "suspend").
Maybe a link could be added on the debian wiki at
http://wiki.debian.org/Suspend ? The "shutdown" method described in the
document seems to work. But it is a bit clunky and it wasn't immediately
obvious how to set this option permanently or whether it even applies to
suspend to RAM (more for the wiki...)
In the meantime I found the following site
http://thecodecentral.com/2011/01/18/fix-ubuntu-10-10-suspendhibernate-not-
working-bug
and shamelessly copy-pasted the suggested script. It works pretty well - the
only obvious problem at the moment is that waking from sleep requires a press
of the power button (lid-opening doesn't suffice). But at least there is no
freeze with data loss and reboot. Huge progress.
The working "shutdown" method suggests a bios issue and the copied script
indicates a usb problem. Follow up might therefore look at the usb settings in
the bios and investigate a bios upgrade (the changelog mumbles something about
usb).
The comments on the web site suggest that the solution has helped a lot of
people and with different machines.
Thanks and best wishes,
Boris
> Is this a regression?
Not really (the machine is new). I tried older debian 5.09 and 6.03 live cds.
With 6.03 suspending from a session worked under some conditions (lid) but not
all (menu).
> Does suspend-to-disk
> (triggered with
>
> echo disk >/sys/power/state
> ) work? If you have time to follow the instructions from
> basic-pm-debugging.txt[1] to narrow down the cause, that would be very
> useful.
around (we beginners don't know to search for "pm-" instead of "suspend").
Maybe a link could be added on the debian wiki at
http://wiki.debian.org/Suspend ? The "shutdown" method described in the
document seems to work. But it is a bit clunky and it wasn't immediately
obvious how to set this option permanently or whether it even applies to
suspend to RAM (more for the wiki...)
In the meantime I found the following site
http://thecodecentral.com/2011/01/18/fix-ubuntu-10-10-suspendhibernate-not-
working-bug
and shamelessly copy-pasted the suggested script. It works pretty well - the
only obvious problem at the moment is that waking from sleep requires a press
of the power button (lid-opening doesn't suffice). But at least there is no
freeze with data loss and reboot. Huge progress.
The working "shutdown" method suggests a bios issue and the copied script
indicates a usb problem. Follow up might therefore look at the usb settings in
the bios and investigate a bios upgrade (the changelog mumbles something about
usb).
The comments on the web site suggest that the solution has helped a lot of
people and with different machines.
Thanks and best wishes,
Boris
Jonathan Nieder
Feb 6, 2012, 8:30:01 PM2/6/12
to
Hi again,
Boris Barbour wrote:
> The "shutdown" method described in the
> document seems to work. But it is a bit clunky
All right --- that's useful to know. Of course I was not suggesting
this as a workaround but as a diagnostic tool.
[...]
modprobe -r ehci_hcd
modprobe -r xhci_hcd
echo disk >/sys/power/state
modprobe ehci_hcd
modprobe xhci_hcd
If so, could you also try unloading/loading only one of the two drivers to
see which one is the culprit?
Please attach "acpidump" output (so we can learn about the BIOS) and
full "dmesg" output from booting and successfully hibernating/resuming
in the "platform" mode with USB drivers unloaded (which will tell us
many things).
Thanks and sorry for the trouble,
Jonathan
Boris Barbour wrote:
> The "shutdown" method described in the
> document seems to work. But it is a bit clunky
this as a workaround but as a diagnostic tool.
[...]
> In the meantime I found the following site
>
> http://thecodecentral.com/2011/01/18/fix-ubuntu-10-10-suspendhibernate-not-working-bug
>
> and shamelessly copy-pasted the suggested script. It works pretty well
Can you reproduce this result without that script? Like so:
>
> http://thecodecentral.com/2011/01/18/fix-ubuntu-10-10-suspendhibernate-not-working-bug
>
> and shamelessly copy-pasted the suggested script. It works pretty well
modprobe -r ehci_hcd
modprobe -r xhci_hcd
echo disk >/sys/power/state
modprobe ehci_hcd
modprobe xhci_hcd
If so, could you also try unloading/loading only one of the two drivers to
see which one is the culprit?
Please attach "acpidump" output (so we can learn about the BIOS) and
full "dmesg" output from booting and successfully hibernating/resuming
in the "platform" mode with USB drivers unloaded (which will tell us
many things).
Thanks and sorry for the trouble,
Jonathan
Jonathan Nieder
Feb 12, 2012, 9:10:01 PM2/12/12
to
# [1]
forwarded 658778 https://bugzilla.kernel.org/show_bug.cgi?id=37632
quit
Boris Barbour wrote:
> Hi Jonathan,
>> If so, could you also try unloading/loading only one of the two drivers to
>> see which one is the culprit?
>
> Removing only ehci_hcd, hibernation works perfectly. If only xhci_hcd is
> removed, the screen is blanked but stays on. A power cycle is necessary,
> although the computer then resumes OK.
Nicely done. Ok.
References:
https://bugzilla.kernel.org/show_bug.cgi?id=37632
https://bugzilla.redhat.com/show_bug.cgi?id=697150
http://thread.gmane.org/gmane.linux.kernel/1222803
Please add yourselves to the cc list for the upstream bug [1]. Further
work can be coordinated there.
forwarded 658778 https://bugzilla.kernel.org/show_bug.cgi?id=37632
quit
Boris Barbour wrote:
> Hi Jonathan,
>> If so, could you also try unloading/loading only one of the two drivers to
>> see which one is the culprit?
>
> removed, the screen is blanked but stays on. A power cycle is necessary,
> although the computer then resumes OK.
Nicely done. Ok.
References:
https://bugzilla.kernel.org/show_bug.cgi?id=37632
https://bugzilla.redhat.com/show_bug.cgi?id=697150
http://thread.gmane.org/gmane.linux.kernel/1222803
Please add yourselves to the cc list for the upstream bug [1]. Further
work can be coordinated there.
0 new messages