Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
How do I stop my machine from rebooting after a power cut?
1 view
Skip to first unread message
katej
Nov 18, 2003, 12:26:10 PM11/18/03
to
Hi everyone,
I installed a new kernel (2.4.18-3smp on an i686) on my RH 7.3 Linux
machine. Prior to this it used to stay down after a power cut. This
suited me fine (avoids peaks in power when many machines all boot up
at once). Now however it reboots immediately after a power cut. Does
anyone know of a way of keeping it down after a power cut?
Thanks,
katej
I installed a new kernel (2.4.18-3smp on an i686) on my RH 7.3 Linux
machine. Prior to this it used to stay down after a power cut. This
suited me fine (avoids peaks in power when many machines all boot up
at once). Now however it reboots immediately after a power cut. Does
anyone know of a way of keeping it down after a power cut?
Thanks,
katej
Jawn
Nov 18, 2003, 8:52:56 PM11/18/03
to
In article <15e3dad9.03111...@posting.google.com>,
kjoh...@rcsi.ie says...
kjoh...@rcsi.ie says...
I seem to remember a CMOS firmware setting that dictated this behavior
on some chipsets. You might try poking around in there.
0 new messages