[PATCH] arm64: dts: allwinner: pinephone: Use generic sensor node names

[Samuel Holland]

Instead of duplicating part of the compatible string in the node name,
use generic names as recommended by (and listed in) section 2.2.2 of the
Devicetree Specification.

Suggested-by: Maxime Ripard <max...@cerno.tech>
Signed-off-by: Samuel Holland <sam...@sholland.org>
---
arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index 2da69450eec1..2dfe9bae8c67 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -161,7 +161,7 @@ &i2c1 {
status = "okay";

/* Magnetometer */
- lis3mdl: lis3mdl@1e {
+ lis3mdl: magnetometer@1e {
compatible = "st,lis3mdl-magn";
reg = <0x1e>;
vdd-supply = <&reg_dldo1>;
@@ -169,7 +169,7 @@ lis3mdl: lis3mdl@1e {
};

/* Light/proximity sensor */
- stk3311@48 {
+ light-sensor@48 {
compatible = "sensortek,stk3311";
reg = <0x48>;
interrupt-parent = <&pio>;
@@ -179,7 +179,7 @@ stk3311@48 {
};

/* Accelerometer/gyroscope */
- mpu6050@68 {
+ accelerometer@68 {
compatible = "invensense,mpu6050";
reg = <0x68>;
interrupt-parent = <&pio>;
--
2.26.2

[Maxime Ripard]

On Thu, Nov 05, 2020 at 09:20:55PM -0600, Samuel Holland wrote:
> Instead of duplicating part of the compatible string in the node name,
> use generic names as recommended by (and listed in) section 2.2.2 of the
> Devicetree Specification.
>
> Suggested-by: Maxime Ripard <max...@cerno.tech>
> Signed-off-by: Samuel Holland <sam...@sholland.org>

Applied, thanks!
Maxime