[PATCH 01/16] ASoC: sun4i-i2s: Add support for H6 I2S

[Clément Péron]

From: Jernej Skrabec <jernej....@siol.net>

H6 I2S is very similar to that in H3, except it supports up to 16
channels.

Signed-off-by: Jernej Skrabec <jernej....@siol.net>
Signed-off-by: Marcus Cooper <codek...@gmail.com>
Signed-off-by: Clément Péron <peron...@gmail.com>
---
sound/soc/sunxi/sun4i-i2s.c | 227 ++++++++++++++++++++++++++++++++++++
1 file changed, 227 insertions(+)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index d0a8d5810c0a..9690389cb68e 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -124,6 +124,21 @@
#define SUN8I_I2S_RX_CHAN_SEL_REG 0x54
#define SUN8I_I2S_RX_CHAN_MAP_REG 0x58

+/* Defines required for sun50i-h6 support */
+#define SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET_MASK GENMASK(21, 20)
+#define SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET(offset) ((offset) << 20)
+#define SUN50I_H6_I2S_TX_CHAN_SEL_MASK GENMASK(19, 16)
+#define SUN50I_H6_I2S_TX_CHAN_SEL(chan) ((chan - 1) << 16)
+#define SUN50I_H6_I2S_TX_CHAN_EN_MASK GENMASK(15, 0)
+#define SUN50I_H6_I2S_TX_CHAN_EN(num_chan) (((1 << num_chan) - 1))
+
+#define SUN50I_H6_I2S_TX_CHAN_MAP0_REG 0x44
+#define SUN50I_H6_I2S_TX_CHAN_MAP1_REG 0x48
+
+#define SUN50I_H6_I2S_RX_CHAN_SEL_REG 0x64
+#define SUN50I_H6_I2S_RX_CHAN_MAP0_REG 0x68
+#define SUN50I_H6_I2S_RX_CHAN_MAP1_REG 0x6C
+
struct sun4i_i2s;

/**
@@ -466,6 +481,65 @@ static int sun8i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
return 0;
}

+static int sun50i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
+ const struct snd_pcm_hw_params *params)
+{
+ unsigned int channels = params_channels(params);
+ unsigned int slots = channels;
+ unsigned int lrck_period;
+
+ if (i2s->slots)
+ slots = i2s->slots;
+
+ /* Map the channels for playback and capture */
+ regmap_write(i2s->regmap, SUN50I_H6_I2S_TX_CHAN_MAP1_REG, 0x76543210);
+ regmap_write(i2s->regmap, SUN50I_H6_I2S_RX_CHAN_MAP1_REG, 0x76543210);
+
+ /* Configure the channels */
+ regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
+ SUN50I_H6_I2S_TX_CHAN_SEL_MASK,
+ SUN50I_H6_I2S_TX_CHAN_SEL(channels));
+ regmap_update_bits(i2s->regmap, SUN50I_H6_I2S_RX_CHAN_SEL_REG,
+ SUN50I_H6_I2S_TX_CHAN_SEL_MASK,
+ SUN50I_H6_I2S_TX_CHAN_SEL(channels));
+
+ regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
+ SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM_MASK,
+ SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM(channels));
+ regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
+ SUN8I_I2S_CHAN_CFG_RX_SLOT_NUM_MASK,
+ SUN8I_I2S_CHAN_CFG_RX_SLOT_NUM(channels));
+
+ switch (i2s->format & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
+ case SND_SOC_DAIFMT_LEFT_J:
+ case SND_SOC_DAIFMT_RIGHT_J:
+ lrck_period = params_physical_width(params) * slots;
+ break;
+
+ case SND_SOC_DAIFMT_I2S:
+ lrck_period = params_physical_width(params);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if (i2s->slot_width)
+ lrck_period = i2s->slot_width;
+
+ regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT0_REG,
+ SUN8I_I2S_FMT0_LRCK_PERIOD_MASK,
+ SUN8I_I2S_FMT0_LRCK_PERIOD(lrck_period));
+
+ regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
+ SUN50I_H6_I2S_TX_CHAN_EN_MASK,
+ SUN50I_H6_I2S_TX_CHAN_EN(channels));
+
+ return 0;
+}
+
static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
@@ -691,6 +765,108 @@ static int sun8i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
return 0;
}

+static int sun50i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
+ unsigned int fmt)
+{
+ u32 mode, val;
+ u8 offset;
+
+ /*
+ * DAI clock polarity
+ *
+ * The setup for LRCK contradicts the datasheet, but under a
+ * scope it's clear that the LRCK polarity is reversed
+ * compared to the expected polarity on the bus.
+ */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_IB_IF:
+ /* Invert both clocks */
+ val = SUN8I_I2S_FMT0_BCLK_POLARITY_INVERTED;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ /* Invert bit clock */
+ val = SUN8I_I2S_FMT0_BCLK_POLARITY_INVERTED |
+ SUN8I_I2S_FMT0_LRCLK_POLARITY_INVERTED;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ /* Invert frame clock */
+ val = 0;
+ break;
+ case SND_SOC_DAIFMT_NB_NF:
+ val = SUN8I_I2S_FMT0_LRCLK_POLARITY_INVERTED;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT0_REG,
+ SUN8I_I2S_FMT0_LRCLK_POLARITY_MASK |
+ SUN8I_I2S_FMT0_BCLK_POLARITY_MASK,
+ val);
+
+ /* DAI Mode */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ mode = SUN8I_I2S_CTRL_MODE_PCM;
+ offset = 1;
+ break;
+
+ case SND_SOC_DAIFMT_DSP_B:
+ mode = SUN8I_I2S_CTRL_MODE_PCM;
+ offset = 0;
+ break;
+
+ case SND_SOC_DAIFMT_I2S:
+ mode = SUN8I_I2S_CTRL_MODE_LEFT;
+ offset = 1;
+ break;
+
+ case SND_SOC_DAIFMT_LEFT_J:
+ mode = SUN8I_I2S_CTRL_MODE_LEFT;
+ offset = 0;
+ break;
+
+ case SND_SOC_DAIFMT_RIGHT_J:
+ mode = SUN8I_I2S_CTRL_MODE_RIGHT;
+ offset = 0;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
+ SUN8I_I2S_CTRL_MODE_MASK, mode);
+ regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
+ SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET_MASK,
+ SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET(offset));
+ regmap_update_bits(i2s->regmap, SUN50I_H6_I2S_RX_CHAN_SEL_REG,
+ SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET_MASK,
+ SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET(offset));
+
+ /* DAI clock master masks */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ /* BCLK and LRCLK master */
+ val = SUN8I_I2S_CTRL_BCLK_OUT | SUN8I_I2S_CTRL_LRCK_OUT;
+ break;
+
+ case SND_SOC_DAIFMT_CBM_CFM:
+ /* BCLK and LRCLK slave */
+ val = 0;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
+ SUN8I_I2S_CTRL_BCLK_OUT | SUN8I_I2S_CTRL_LRCK_OUT,
+ val);
+
+ return 0;
+}
+
static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
{
struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai);
@@ -971,6 +1147,22 @@ static const struct reg_default sun8i_i2s_reg_defaults[] = {
{ SUN8I_I2S_RX_CHAN_MAP_REG, 0x00000000 },
};

+static const struct reg_default sun50i_i2s_reg_defaults[] = {
+ { SUN4I_I2S_CTRL_REG, 0x00060000 },
+ { SUN4I_I2S_FMT0_REG, 0x00000033 },
+ { SUN4I_I2S_FMT1_REG, 0x00000030 },
+ { SUN4I_I2S_FIFO_CTRL_REG, 0x000400f0 },
+ { SUN4I_I2S_DMA_INT_CTRL_REG, 0x00000000 },
+ { SUN4I_I2S_CLK_DIV_REG, 0x00000000 },
+ { SUN8I_I2S_CHAN_CFG_REG, 0x00000000 },
+ { SUN8I_I2S_TX_CHAN_SEL_REG, 0x00000000 },
+ { SUN50I_H6_I2S_TX_CHAN_MAP0_REG, 0x00000000 },
+ { SUN50I_H6_I2S_TX_CHAN_MAP1_REG, 0x00000000 },
+ { SUN50I_H6_I2S_RX_CHAN_SEL_REG, 0x00000000 },
+ { SUN50I_H6_I2S_RX_CHAN_MAP0_REG, 0x00000000 },
+ { SUN50I_H6_I2S_RX_CHAN_MAP1_REG, 0x00000000 },
+};
+
static const struct regmap_config sun4i_i2s_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
@@ -998,6 +1190,19 @@ static const struct regmap_config sun8i_i2s_regmap_config = {
.volatile_reg = sun8i_i2s_volatile_reg,
};

+static const struct regmap_config sun50i_i2s_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = SUN50I_H6_I2S_RX_CHAN_MAP1_REG,
+ .cache_type = REGCACHE_FLAT,
+ .reg_defaults = sun50i_i2s_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(sun50i_i2s_reg_defaults),
+ .writeable_reg = sun4i_i2s_wr_reg,
+ .readable_reg = sun8i_i2s_rd_reg,
+ .volatile_reg = sun8i_i2s_volatile_reg,
+};
+
static int sun4i_i2s_runtime_resume(struct device *dev)
{
struct sun4i_i2s *i2s = dev_get_drvdata(dev);
@@ -1156,6 +1361,24 @@ static const struct sun4i_i2s_quirks sun50i_a64_codec_i2s_quirks = {
.set_fmt = sun4i_i2s_set_soc_fmt,
};

+static const struct sun4i_i2s_quirks sun50i_h6_i2s_quirks = {
+ .has_reset = true,
+ .reg_offset_txdata = SUN8I_I2S_FIFO_TX_REG,
+ .sun4i_i2s_regmap = &sun50i_i2s_regmap_config,
+ .field_clkdiv_mclk_en = REG_FIELD(SUN4I_I2S_CLK_DIV_REG, 8, 8),
+ .field_fmt_wss = REG_FIELD(SUN4I_I2S_FMT0_REG, 0, 2),
+ .field_fmt_sr = REG_FIELD(SUN4I_I2S_FMT0_REG, 4, 6),
+ .bclk_dividers = sun8i_i2s_clk_div,
+ .num_bclk_dividers = ARRAY_SIZE(sun8i_i2s_clk_div),
+ .mclk_dividers = sun8i_i2s_clk_div,
+ .num_mclk_dividers = ARRAY_SIZE(sun8i_i2s_clk_div),
+ .get_bclk_parent_rate = sun8i_i2s_get_bclk_parent_rate,
+ .get_sr = sun8i_i2s_get_sr_wss,
+ .get_wss = sun8i_i2s_get_sr_wss,
+ .set_chan_cfg = sun50i_i2s_set_chan_cfg,
+ .set_fmt = sun50i_i2s_set_soc_fmt,
+};
+
static int sun4i_i2s_init_regmap_fields(struct device *dev,
struct sun4i_i2s *i2s)
{
@@ -1325,6 +1548,10 @@ static const struct of_device_id sun4i_i2s_match[] = {
.compatible = "allwinner,sun50i-a64-codec-i2s",
.data = &sun50i_a64_codec_i2s_quirks,
},
+ {
+ .compatible = "allwinner,sun50i-h6-i2s",
+ .data = &sun50i_h6_i2s_quirks,
+ },
{}
};
MODULE_DEVICE_TABLE(of, sun4i_i2s_match);
--
2.25.1

[Samuel Holland]

According to the manual, LEFT_J and RIGHT_J should use the same calculation as
I2S, not the one for PCM/DSP.

> + lrck_period = params_physical_width(params) * slots;
> + break;
> +
> + case SND_SOC_DAIFMT_I2S:
> + lrck_period = params_physical_width(params);
> + break;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + if (i2s->slot_width)
> + lrck_period = i2s->slot_width;
> +
> + regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT0_REG,
> + SUN8I_I2S_FMT0_LRCK_PERIOD_MASK,
> + SUN8I_I2S_FMT0_LRCK_PERIOD(lrck_period));

From the description in the manual, this looks off by one. The number of BCLKs
per LRCK is LRCK_PERIOD + 1.

This comment makes us sound a lot more confident than I think we actually are.

Regards,
Samuel

[Jernej Škrabec]

Hi Samuel!

Dne petek, 10. julij 2020 ob 07:44:33 CEST je Samuel Holland napisal(a):

Are you sure? Macro SUN8I_I2S_FMT0_LRCK_PERIOD() is defined as follows:

#define SUN8I_I2S_FMT0_LRCK_PERIOD(period) ((period - 1) << 8)

which already lowers value by 1.

Best regards,
Jernej

[Samuel Holland]

Jernej,

On 7/10/20 2:22 PM, Jernej Škrabec wrote:
>> From the description in the manual, this looks off by one. The number of
>> BCLKs per LRCK is LRCK_PERIOD + 1.
>
> Are you sure? Macro SUN8I_I2S_FMT0_LRCK_PERIOD() is defined as follows:
>
> #define SUN8I_I2S_FMT0_LRCK_PERIOD(period) ((period - 1) << 8)
>
> which already lowers value by 1.

No, sorry, I had missed the subtraction happening in the macro. So there's no
problem here.

Thanks,
Samuel

[Clément Péron]

Hi Samuel,

That's a comment that needs to be checked using a Logic analyzer (that
I don't have).
It's a copy paste from the previous generation.
But this seems wrong as we need to specify
"simple-audio-card,frame-inversion;" in the device-tree.

Regards,
Clement

>
> Regards,
> Samuel