help for MMC2 internal flash error on h616

[jose vigno moura sousa]

I recompile u-boot on h616 with emcp memory but in the sd card works perfect , but  when  I try install on internal emcp  sys this error:

U-Boot SPL 2021.07 (Nov 16 2023 - 11:24:45 -0300) 

Error, wrong i2c adapter 1 max 1 possible 

DRAM: 1024 MiB 

Failed to set core voltage!   set CPU 792000000hz frequency 

Trying to boot from MMC2 

Card did not respond to voltage select! : -110

spl: mmc init failed with error: -95
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

whey boot with sd card says this message:

U-Boot SPL 2021.07 (Nov 17 2023 - 10:14:40 -0300)
Error, wrong i2c adapter 1 max 1 possible
DRAM: 1024 MiB
Failed to set core voltage!   set CPU 792000000hz frequency
Trying to boot from MMC1
NOTICE:  BL31: v2.8(debug):v2.8
NOTICE:  BL31: Built : 11:38:29, Oct  6 2023
NOTICE:  BL31: Detected Allwinner H616 SoC (1823)
NOTICE:  BL31: Found U-Boot DTB at 0x4a088638, model: tanix tx6s
INFO:    ARM GICv2 driver initialized
INFO:    Configuring SPC Controller
INFO:    PMIC: Probing AXP305 on RSB
WARNING: PMIC: No regulators DT node, skipping setup
INFO:    BL31: Platform setup done
INFO:    BL31: Initializing runtime services
INFO:    BL31: cortex_a53: CPU workaround for 855873 was applied
INFO:    BL31: cortex_a53: CPU workaround for 1530924 was applied
INFO:    PSCI: Suspend is unavailable
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x4a000000
INFO:    SPSR = 0x3c9
INFO:    Changed devicetree.


U-Boot 2021.07 (Nov 17 2023 - 10:14:40 -0300) Allwinner Technology

CPU:   Allwinner H616 (SUN50I)
Model: tanix tx6s
I2C:   ready
DRAM:  1 GiB
MMC:   mmc@4020000: 0, mmc@4022000: 2
Loading Environment from FAT... In:    serial@5000000
Out:   serial@5000000
Err:   serial@5000000
Net:   phy interface6
eth0: ethernet@5030000
starting USB...
No working controllers found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
3247 bytes read in 1 ms (3.1 MiB/s)
## Executing script at 4fc00000
U-boot loaded from SD
Boot script loaded from mmc
952 bytes read in 1 ms (929.7 KiB/s)