casperbuntu

[Muhammed BÜYÜKKURT]

merhabalar
casper minibook aldim
ancak kablosuz internetii tanitamadim bi turlu
guncelleme yapipp 10.4 kurdum ama yine care olmadi
acma kapama dugmesi de islemiyo
bios dan onboard devices diye de birsey yok
ne yapacam sasirdim
--

[Muhammed ER]

wifi tuşunu bilgisayar başlamadan aç. Daha sonra ubuntuyu başlat.

2010/8/1 Muhammed BÜYÜKKURT <selcukl...@gmail.com>

--
SELÇUK ÜNİVERSİTESİ LİNUX TOPLULUĞU"
linux-...@googlegroups.com
http://groups.google.com.tr/group/linux-selcuk?hl=tr

[muhammedd yusuf]

yok işe yaramıyor

On 1 Ağustos, 21:12, Muhammed ER <er.muham...@gmail.com> wrote:
> wifi tuşunu bilgisayar başlamadan aç. Daha sonra ubuntuyu başlat.
>

> 2010/8/1 Muhammed BÜYÜKKURT <selcuklubiyo...@gmail.com>

>
>
>
> > merhabalar
> > casper minibook aldim
> > ancak kablosuz internetii tanitamadim  bi turlu
> > guncelleme yapipp 10.4  kurdum ama yine care olmadi
> > acma kapama dugmesi de islemiyo
> > bios dan onboard devices diye de birsey yok
> > ne yapacam sasirdim
> > --
>
> > --
> > SELÇUK ÜNİVERSİTESİ LİNUX TOPLULUĞU"
> > linux-...@googlegroups.com

> >http://groups.google.com.tr/group/linux-selcuk?hl=tr- Alıntıyı gizle -
>
> - Alıntıyı göster -

[ibrahim güven]

lspci çıktısını gönderebilir misin?

2010/8/1 Muhammed BÜYÜKKURT <selcukl...@gmail.com>

[muhammedd yusuf]

mavera@caspermini:~$ lspci
00:00.0 Host bridge: Intel Corporation Pineview DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation Pineview
Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation Pineview Integrated
Graphics Controller
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2
EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation Tigerpoint LPC Controller (rev
02)
00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family)
SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
(rev 02)
01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8132
/ L1c Gigabit Ethernet Adapter (rev c0)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device
8172 (rev 10)
mavera@caspermini:~$

mavera@caspermini:~$ dmesg
[ 0.221920] pci 0000:02:00.0: reg 14 32bit mmio:
[0x92000000-0x92003fff]
[ 0.222005] pci 0000:02:00.0: supports D1 D2
[ 0.222010] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.222019] pci 0000:02:00.0: PME# disabled
[ 0.222109] pci 0000:00:1c.1: bridge io port: [0x1000-0x1fff]
[ 0.222118] pci 0000:00:1c.1: bridge 32bit mmio:
[0x92000000-0x92ffffff]
[ 0.222130] pci 0000:00:1c.1: bridge 64bit mmio pref:
[0x91000000-0x91ffffff]
[ 0.222208] pci 0000:00:1e.0: transparent bridge
[ 0.222247] pci_bus 0000:00: on NUMA node 0
[ 0.222261] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.222605] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.P32_._PRT]
[ 0.222852] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.EXP1._PRT]
[ 0.223038] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.EXP2._PRT]
[ 0.223414] ACPI Error (dsfield-0140): [CAPB] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 0.223428] ACPI Error (psparse-0537): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node f7014b40), AE_ALREADY_EXISTS
[ 0.234318] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11
12)
[ 0.234569] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11
12)
[ 0.234816] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11
12)
[ 0.235061] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11
12)
[ 0.235308] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11
12) *0, disabled.
[ 0.235557] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11
12) *0, disabled.
[ 0.235805] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11
12) *0, disabled.
[ 0.236076] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11
12) *0, disabled.
[ 0.236484] SCSI subsystem initialized
[ 0.236564] libata version 3.00 loaded.
[ 0.236564] usbcore: registered new interface driver usbfs
[ 0.236564] usbcore: registered new interface driver hub
[ 0.236564] usbcore: registered new device driver usb
[ 0.236564] ACPI: WMI: Mapper loaded
[ 0.236564] PCI: Using ACPI for IRQ routing
[ 0.248021] Bluetooth: Core ver 2.15
[ 0.248067] NET: Registered protocol family 31
[ 0.248067] Bluetooth: HCI device and connection manager
initialized
[ 0.248067] Bluetooth: HCI socket layer initialized
[ 0.248067] NetLabel: Initializing
[ 0.248067] NetLabel: domain hash size = 128
[ 0.248067] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.248077] NetLabel: unlabeled traffic allowed by default
[ 0.248144] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.248155] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.264024] pnp: PnP ACPI init
[ 0.264060] ACPI: bus type pnp registered
[ 0.268522] pnp: PnP ACPI: found 9 devices
[ 0.268528] ACPI: ACPI bus type pnp unregistered
[ 0.268535] PnPBIOS: Disabled by ACPI PNP
[ 0.268560] system 00:01: ioport range 0x600-0x60f has been
reserved
[ 0.268567] system 00:01: ioport range 0x610-0x610 has been
reserved
[ 0.268573] system 00:01: ioport range 0x800-0x80f has been
reserved
[ 0.268580] system 00:01: ioport range 0x810-0x817 has been
reserved
[ 0.268587] system 00:01: ioport range 0x400-0x47f has been
reserved
[ 0.268594] system 00:01: ioport range 0x500-0x53f has been
reserved
[ 0.268600] system 00:01: ioport range 0x380-0x381 has been
reserved
[ 0.268610] system 00:01: iomem range 0xe0000000-0xefffffff has
been reserved
[ 0.268618] system 00:01: iomem range 0xfed1c000-0xfed1ffff has
been reserved
[ 0.268626] system 00:01: iomem range 0xfed14000-0xfed17fff has
been reserved
[ 0.268633] system 00:01: iomem range 0xfed18000-0xfed18fff has
been reserved
[ 0.268641] system 00:01: iomem range 0xfed19000-0xfed19fff has
been reserved
[ 0.268648] system 00:01: iomem range 0xfec00000-0xfec00fff could
not be reserved
[ 0.268656] system 00:01: iomem range 0xfee00000-0xfee00fff has
been reserved
[ 0.303521] AppArmor: AppArmor Filesystem Enabled
[ 0.303587] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.303596] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.303606] pci 0000:00:1c.0: MEM window: 0x93000000-0x93ffffff
[ 0.303615] pci 0000:00:1c.0: PREFETCH window:
0x00000090000000-0x00000090ffffff
[ 0.303627] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.303634] pci 0000:00:1c.1: IO window: 0x1000-0x1fff
[ 0.303643] pci 0000:00:1c.1: MEM window: 0x92000000-0x92ffffff
[ 0.303653] pci 0000:00:1c.1: PREFETCH window:
0x00000091000000-0x00000091ffffff
[ 0.303665] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.303669] pci 0000:00:1e.0: IO window: disabled
[ 0.303678] pci 0000:00:1e.0: MEM window: disabled
[ 0.303686] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.303707] alloc irq_desc for 16 on node -1
[ 0.303713] alloc kstat_irqs on node -1
[ 0.303724] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 0.303734] pci 0000:00:1c.0: setting latency timer to 64
[ 0.303749] alloc irq_desc for 17 on node -1
[ 0.303753] alloc kstat_irqs on node -1
[ 0.303761] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 0.303770] pci 0000:00:1c.1: setting latency timer to 64
[ 0.303784] pci 0000:00:1e.0: setting latency timer to 64
[ 0.303793] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.303799] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.303805] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.303811] pci_bus 0000:01: resource 1 mem:
[0x93000000-0x93ffffff]
[ 0.303818] pci_bus 0000:01: resource 2 pref mem
[0x90000000-0x90ffffff]
[ 0.303824] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.303830] pci_bus 0000:02: resource 1 mem:
[0x92000000-0x92ffffff]
[ 0.303837] pci_bus 0000:02: resource 2 pref mem
[0x91000000-0x91ffffff]
[ 0.303843] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.303849] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.303917] NET: Registered protocol family 2
[ 0.304130] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 0.304741] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.305671] TCP bind hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.306101] TCP: Hash tables configured (established 131072 bind
65536)
[ 0.306108] TCP reno registered
[ 0.306320] NET: Registered protocol family 1
[ 0.306440] Trying to unpack rootfs image as initramfs...
[ 0.501084] Switched to high resolution mode on CPU 1
[ 0.504021] Switched to high resolution mode on CPU 0
[ 0.652998] Freeing initrd memory: 7462k freed
[ 0.658622] Simple Boot Flag at 0x44 set to 0x1
[ 0.658987] cpufreq-nforce2: No nForce2 chipset.
[ 0.659046] Scanning for low memory corruption every 60 seconds
[ 0.659247] audit: initializing netlink socket (disabled)
[ 0.659274] type=2000 audit(1280072447.656:1): initialized
[ 0.677785] highmem bounce pool size: 64 pages
[ 0.677799] HugeTLB registered 4 MB page size, pre-allocated 0
pages
[ 0.680922] VFS: Disk quotas dquot_6.5.2
[ 0.681051] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.682263] fuse init (API version 7.12)
[ 0.682453] msgmni has been set to 1706
[ 0.682900] alg: No test for stdrng (krng)
[ 0.682933] io scheduler noop registered
[ 0.682938] io scheduler anticipatory registered
[ 0.682942] io scheduler deadline registered
[ 0.683043] io scheduler cfq registered (default)
[ 0.683067] pci 0000:00:02.0: Boot video device
[ 0.700248] alloc irq_desc for 24 on node -1
[ 0.700255] alloc kstat_irqs on node -1
[ 0.700274] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.700291] pcieport-driver 0000:00:1c.0: setting latency timer to
64
[ 0.700533] alloc irq_desc for 25 on node -1
[ 0.700538] alloc kstat_irqs on node -1
[ 0.700553] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.700569] pcieport-driver 0000:00:1c.1: setting latency timer to
64
[ 0.700743] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.700952] ACPI Error (dsfield-0140): [CAPB] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 0.700967] ACPI Error (psparse-0537): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node f7014b40), AE_ALREADY_EXISTS
[ 0.701231] ACPI Error (dsfield-0140): [CAPB] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 0.701245] ACPI Error (psparse-0537): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node f7014b40), AE_ALREADY_EXISTS
[ 0.701532] ACPI Error (dsfield-0140): [CAPB] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 0.701546] ACPI Error (psparse-0537): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node f7014b40), AE_ALREADY_EXISTS
[ 0.701795] ACPI Error (dsfield-0140): [CAPB] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 0.701809] ACPI Error (psparse-0537): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node f7014b40), AE_ALREADY_EXISTS
[ 0.701912] pciehp: PCI Express Hot Plug Controller Driver version:
0.4
[ 0.703032] ACPI: AC Adapter [ACAD] (on-line)
[ 0.703171] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.703179] ACPI: Power Button [PWRF]
[ 0.703275] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.703282] ACPI: Power Button [PWRB]
[ 0.703376] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.703383] ACPI: Sleep Button [SLPB]
[ 0.703470] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 0.704370] ACPI: Lid Switch [LID0]
[ 0.705646] ACPI: SSDT 7e252c90 001F7 (v02 CASPER ERA 00003000
INTL 20051117)
[ 0.706486] ACPI: SSDT 7e251e10 001C1 (v02 CASPER ERA 00003001
INTL 20051117)
[ 0.708034] Marking TSC unstable due to TSC halts in idle
[ 0.708075] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.708136] processor LNXCPU:00: registered as cooling_device0
[ 0.708906] ACPI: SSDT 7e252f10 000D0 (v02 CASPER ERA 00003000
INTL 20051117)
[ 0.709671] ACPI: SSDT 7e250f10 00083 (v02 CASPER ERA 00003000
INTL 20051117)
[ 0.711317] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.711361] processor LNXCPU:01: registered as cooling_device1
[ 0.718605] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.718623] ACPI: Thermal Zone [TZ01] (64 C)
[ 0.718732] isapnp: Scanning for PnP cards...
[ 0.783449] ACPI: Battery Slot [BAT0] (battery present)
[ 1.072791] isapnp: No Plug & Play device found
[ 1.075486] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.078049] brd: module loaded
[ 1.079031] loop: module loaded
[ 1.079195] input: Macintosh mouse button emulation as
/devices/virtual/input/input4
[ 1.079355] ahci 0000:00:1f.2: version 3.0
[ 1.079381] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 1.079445] alloc irq_desc for 26 on node -1
[ 1.079450] alloc kstat_irqs on node -1
[ 1.079469] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 1.079525] ahci: SSS flag set, parallel bus scan disabled
[ 1.079567] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3
Gbps 0x1 impl SATA mode
[ 1.079575] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio
slum part
[ 1.079584] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.079822] scsi0 : ahci
[ 1.080054] scsi1 : ahci
[ 1.080186] scsi2 : ahci
[ 1.080335] scsi3 : ahci
[ 1.080731] ata1: SATA max UDMA/133 abar m1024@0x94204000 port
0x94204100 irq 26
[ 1.080737] ata2: DUMMY
[ 1.080741] ata3: DUMMY
[ 1.080744] ata4: DUMMY
[ 1.082592] Fixed MDIO Bus: probed
[ 1.082672] PPP generic driver version 2.4.2
[ 1.082878] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 1.082921] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 1.082950] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.082957] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.083021] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 1
[ 1.083031] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.086973] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.086984] ehci_hcd 0000:00:1d.7: cache line size of 32 is not
supported
[ 1.087014] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x94204400
[ 1.100031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.100185] usb usb1: configuration #1 chosen from 1 choice
[ 1.100247] hub 1-0:1.0: USB hub found
[ 1.100264] hub 1-0:1.0: 8 ports detected
[ 1.100388] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.100428] uhci_hcd: USB Universal Host Controller Interface
driver
[ 1.100493] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 1.100528] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.100537] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.100609] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 1.100648] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
[ 1.100813] usb usb2: configuration #1 chosen from 1 choice
[ 1.100872] hub 2-0:1.0: USB hub found
[ 1.100886] hub 2-0:1.0: 2 ports detected
[ 1.100972] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[ 1.100984] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.100991] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.101051] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
[ 1.101100] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00003060
[ 1.101263] usb usb3: configuration #1 chosen from 1 choice
[ 1.101321] hub 3-0:1.0: USB hub found
[ 1.101334] hub 3-0:1.0: 2 ports detected
[ 1.101418] alloc irq_desc for 18 on node -1
[ 1.101423] alloc kstat_irqs on node -1
[ 1.101443] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 1.101454] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.101461] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.101524] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
[ 1.101571] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 1.101732] usb usb4: configuration #1 chosen from 1 choice
[ 1.101789] hub 4-0:1.0: USB hub found
[ 1.101803] hub 4-0:1.0: 2 ports detected
[ 1.101884] alloc irq_desc for 19 on node -1
[ 1.101889] alloc kstat_irqs on node -1
[ 1.101899] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low)
-> IRQ 19
[ 1.101910] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.101917] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.101986] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 5
[ 1.102033] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00003020
[ 1.102194] usb usb5: configuration #1 chosen from 1 choice
[ 1.102251] hub 5-0:1.0: USB hub found
[ 1.102265] hub 5-0:1.0: 2 ports detected
[ 1.102442] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at
0x60,0x64 irq 1,12
[ 1.110013] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.110027] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.110148] mice: PS/2 mouse device common for all mice
[ 1.110405] rtc_cmos 00:03: RTC can wake from S4
[ 1.110474] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.110515] rtc0: alarms up to one month, 242 bytes nvram, hpet
irqs
[ 1.110754] device-mapper: uevent: version 1.0.3
[ 1.110984] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-d...@redhat.com
[ 1.111172] device-mapper: multipath: version 1.1.0 loaded
[ 1.111179] device-mapper: multipath round-robin: version 1.0.0
loaded
[ 1.111463] EISA: Probing bus 0 at eisa.0
[ 1.111474] Cannot allocate resource for EISA slot 1
[ 1.111479] Cannot allocate resource for EISA slot 2
[ 1.111484] Cannot allocate resource for EISA slot 3
[ 1.111510] EISA: Detected 0 cards.
[ 1.111904] cpuidle: using governor ladder
[ 1.112149] cpuidle: using governor menu
[ 1.113294] TCP cubic registered
[ 1.113683] NET: Registered protocol family 10
[ 1.114644] lo: Disabled Privacy Extensions
[ 1.114941] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input5
[ 1.115511] NET: Registered protocol family 17
[ 1.115556] Bluetooth: L2CAP ver 2.13
[ 1.115562] Bluetooth: L2CAP socket layer initialized
[ 1.115569] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.115574] Bluetooth: SCO socket layer initialized
[ 1.116313] Bluetooth: RFCOMM TTY layer initialized
[ 1.116323] Bluetooth: RFCOMM socket layer initialized
[ 1.116329] Bluetooth: RFCOMM ver 1.11
[ 1.118028] Using IPI No-Shortcut mode
[ 1.118179] PM: Resume from disk failed.
[ 1.118202] registered taskstats version 1
[ 1.118434] Magic number: 2:608:690
[ 1.118475] mem mem: hash matches
[ 1.118556] rtc_cmos 00:03: setting system clock to 2010-07-25
15:40:48 UTC (1280072448)
[ 1.118564] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.118569] EDD information not available.
[ 1.400123] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.401270] ACPI Warning: \_SB_.PCI0.SATA.PRT0._GTF: Return type
mismatch - found Integer, expected Buffer 20090521 nspredef-940
[ 1.401287] ata1.00: _GTF unexpected object type 0x1
[ 1.401461] ata1.00: ATA-8: WDC WD2500BEVT-00A23T0, 01.01A01, max
UDMA/133
[ 1.401473] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth
31/32)
[ 1.402757] ata1.00: _GTF unexpected object type 0x1
[ 1.402997] ata1.00: configured for UDMA/133
[ 1.412128] usb 1-1: new high speed USB device using ehci_hcd and
address 2
[ 1.416807] scsi 0:0:0:0: Direct-Access ATA WDC
WD2500BEVT-0 01.0 PQ: 0 ANSI: 5
[ 1.417092] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.417208] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks:
(250 GB/232 GiB)
[ 1.417339] sd 0:0:0:0: [sda] Write Protect is off
[ 1.417346] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.417415] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.417741] sda: sda1 sda2 sda3 < sda5 sda6
[ 1.500059] Clocksource tsc unstable (delta = -216885886 ns)
[ 1.511348] sda7 >
[ 1.512158] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.512205] Freeing unused kernel memory: 544k freed
[ 1.512680] Write protecting the kernel text: 4584k
[ 1.512761] Write protecting the kernel read-only data: 1844k
[ 1.547029] usb 1-1: configuration #1 chosen from 1 choice
[ 1.664116] usb 1-2: new high speed USB device using ehci_hcd and
address 3
[ 1.843783] usb 1-2: configuration #1 chosen from 1 choice
[ 1.845050] Linux agpgart interface v0.103
[ 1.855690] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[ 1.856212] agpgart-intel 0000:00:00.0: detected 8188K stolen
memory
[ 1.859793] agpgart-intel 0000:00:00.0: AGP aperture is 256M @
0x80000000
[ 2.019749] [drm] Initialized drm 1.1.0 20060810
[ 2.040105] usb 1-8: new high speed USB device using ehci_hcd and
address 5
[ 2.055506] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 2.055516] i915 0000:00:02.0: setting latency timer to 64
[ 2.062115] alloc irq_desc for 27 on node -1
[ 2.062125] alloc kstat_irqs on node -1
[ 2.062143] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[ 2.072864] Initializing USB Mass Storage driver...
[ 2.073120] scsi4 : SCSI emulation for USB Mass Storage devices
[ 2.073346] usbcore: registered new interface driver usb-storage
[ 2.073355] USB Mass Storage support registered.
[ 2.073632] usb-storage: device found at 2
[ 2.073638] usb-storage: waiting for device to settle before
scanning
[ 2.228762] usb 1-8: configuration #1 chosen from 1 choice
[ 2.291252] [drm] fb0: inteldrmfb frame buffer device
[ 2.298969] acpi device:24: registered as cooling_device2
[ 2.299849] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:22/input/input6
[ 2.299950] ACPI: Video Device [OVGA] (multi-head: yes rom: no
post: no)
[ 2.300004] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0
on minor 0
[ 2.468557] usb 3-1: new low speed USB device using uhci_hcd and
address 2
[ 2.566541] [drm] Big FIFO is enabled
[ 2.628430] [drm] Big FIFO is enabled
[ 2.628447] [drm] LVDS-8: set mode 1024x600 e
[ 2.628553] [drm] Big FIFO is enabled
[ 2.650367] usb 3-1: configuration #1 chosen from 1 choice
[ 2.684146] usbcore: registered new interface driver hiddev
[ 2.697736] input: Logitech Logitech USB Optical Mouse as
/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input7
[ 2.697931] generic-usb 0003:046D:C019.0001: input,hidraw0: USB HID
v1.11 Mouse [Logitech Logitech USB Optical Mouse] on
usb-0000:00:1d.1-1/input0
[ 2.697970] usbcore: registered new interface driver usbhid
[ 2.697977] usbhid: v2.6:USB HID core driver
[ 2.990079] [drm] Big FIFO is enabled
[ 3.017131] Console: switching to colour frame buffer device 128x37
[ 3.531717] PM: Starting manual resume from disk
[ 3.531726] PM: Resume from partition 8:6
[ 3.531730] PM: Checking hibernation image.
[ 3.532062] PM: Resume from disk failed.
[ 3.564420] EXT4-fs (sda7): barriers enabled
[ 3.578626] kjournald2 starting: pid 381, dev sda7:8, commit
interval 5 seconds
[ 3.578804] EXT4-fs (sda7): delayed allocation enabled
[ 3.578812] EXT4-fs: file extents enabled
[ 3.581691] EXT4-fs: mballoc enabled
[ 3.581723] EXT4-fs (sda7): mounted filesystem with ordered data
mode
[ 4.271683] type=1505 audit(1280072451.649:2):
operation="profile_load" pid=406 name=/sbin/dhclient3
[ 4.272263] type=1505 audit(1280072451.649:3):
operation="profile_load" pid=406
name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 4.272592] type=1505 audit(1280072451.653:4):
operation="profile_load" pid=406
name=/usr/lib/connman/scripts/dhclient-script
[ 4.303395] type=1505 audit(1280072451.682:5):
operation="profile_load" pid=407 name=/usr/bin/evince
[ 4.311677] type=1505 audit(1280072451.689:6):
operation="profile_load" pid=407 name=/usr/bin/evince-previewer
[ 4.316810] type=1505 audit(1280072451.697:7):
operation="profile_load" pid=407 name=/usr/bin/evince-thumbnailer
[ 4.354348] type=1505 audit(1280072451.733:8):
operation="profile_load" pid=409 name=/usr/lib/cups/backend/cups-pdf
[ 4.355037] type=1505 audit(1280072451.733:9):
operation="profile_load" pid=409 name=/usr/sbin/cupsd
[ 5.235069] Adding 4000144k swap on /dev/sda6. Priority:-1
extents:1 across:4000144k
[ 6.044961] udev: starting version 147
[ 6.915300] usbcore: registered new interface driver usbserial
[ 6.915358] USB Serial support registered for generic
[ 6.915501] usbcore: registered new interface driver
usbserial_generic
[ 6.915509] usbserial: USB Serial Driver core
[ 6.986949] USB Serial support registered for GSM modem (1-port)
[ 6.987079] option 1-1:1.0: GSM modem (1-port) converter detected
[ 6.987268] usb 1-1: GSM modem (1-port) converter now attached to
ttyUSB0
[ 6.987329] option 1-1:1.1: GSM modem (1-port) converter detected
[ 6.987503] usb 1-1: GSM modem (1-port) converter now attached to
ttyUSB1
[ 6.987571] option 1-1:1.3: GSM modem (1-port) converter detected
[ 6.987759] usb 1-1: GSM modem (1-port) converter now attached to
ttyUSB2
[ 6.987857] usbcore: registered new interface driver option
[ 6.987863] option: v0.7.2:USB Driver for GSM modems
[ 6.994676] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 6.994699] atl1c 0000:01:00.0: setting latency timer to 64
[ 6.994798] atl1c 0000:01:00.0: PME# disabled
[ 6.994812] atl1c 0000:01:00.0: PME# disabled
[ 7.072781] usb-storage: device scan complete
[ 7.073546] scsi 4:0:0:0: Direct-Access ZTE MMC Storage
2.31 PQ: 0 ANSI: 2
[ 7.074488] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 7.083389] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 7.110477] atl1c 0000:01:00.0: version 1.0.0.1-NAPI
[ 7.144253] Linux video capture interface: v2.00
[ 7.275001] lp: driver loaded but no devices found
[ 7.304736] uvcvideo: Found UVC 1.00 device USB Webcam (0408:03e0)
[ 7.331219] input: USB Webcam as
/devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input8
[ 7.331323] usbcore: registered new interface driver uvcvideo
[ 7.331330] USB Video Class driver (v0.1.0)
[ 7.557332] psmouse serio1: ID: 10 00 64
[ 7.591759] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.186083] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input9
[ 8.756578] EXT4-fs (sda7): internal journal on sda7:8
[ 8.949955] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[ 8.950014] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.170167] hda_codec: Unknown model for ALC272, trying auto-probe
from BIOS...
[ 9.171099] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input10
[ 9.663185] EXT4-fs (sda5): barriers enabled
[ 9.663532] kjournald2 starting: pid 757, dev sda5:8, commit
interval 5 seconds
[ 9.717704] EXT4-fs (sda5): internal journal on sda5:8
[ 9.717719] EXT4-fs (sda5): delayed allocation enabled
[ 9.717728] EXT4-fs: file extents enabled
[ 9.760274] EXT4-fs: mballoc enabled
[ 9.760312] EXT4-fs (sda5): mounted filesystem with ordered data
mode
[ 10.938160] __ratelimit: 3 callbacks suppressed
[ 10.938171] type=1505 audit(1280061658.317:11):
operation="profile_replace" pid=827 name=/sbin/dhclient3
[ 10.938962] type=1505 audit(1280061658.317:12):
operation="profile_replace" pid=827
name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 10.939417] type=1505 audit(1280061658.317:13):
operation="profile_replace" pid=827
name=/usr/lib/connman/scripts/dhclient-script
[ 10.951805] type=1505 audit(1280061658.329:14):
operation="profile_replace" pid=828 name=/usr/bin/evince
[ 10.964560] type=1505 audit(1280061658.345:15):
operation="profile_replace" pid=828 name=/usr/bin/evince-previewer
[ 10.971618] type=1505 audit(1280061658.349:16):
operation="profile_replace" pid=828 name=/usr/bin/evince-thumbnailer
[ 10.982397] type=1505 audit(1280061658.361:17):
operation="profile_replace" pid=830
name=/usr/lib/cups/backend/cups-pdf
[ 10.983084] type=1505 audit(1280061658.361:18):
operation="profile_replace" pid=830 name=/usr/sbin/cupsd
[ 10.988319] type=1505 audit(1280061658.365:19):
operation="profile_replace" pid=831 name=/usr/sbin/tcpdump
[ 14.887989] ppdev: user-space parallel port driver
[ 16.083337] alloc irq_desc for 28 on node -1
[ 16.083348] alloc kstat_irqs on node -1
[ 16.083379] atl1c 0000:01:00.0: irq 28 for MSI/MSI-X
[ 16.084285] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.987417] CPU0 attaching NULL sched-domain.
[ 18.987428] CPU1 attaching NULL sched-domain.
[ 19.000660] CPU0 attaching sched-domain:
[ 19.000669] domain 0: span 0-1 level SIBLING
[ 19.000675] groups: 0 1
[ 19.000686] CPU1 attaching sched-domain:
[ 19.000691] domain 0: span 0-1 level SIBLING
[ 19.000697] groups: 1 0
[ 27.907274] CPU0 attaching NULL sched-domain.
[ 27.907285] CPU1 attaching NULL sched-domain.
[ 27.920181] CPU0 attaching sched-domain:
[ 27.920190] domain 0: span 0-1 level SIBLING
[ 27.920197] groups: 0 1
[ 27.920208] CPU1 attaching sched-domain:
[ 27.920213] domain 0: span 0-1 level SIBLING
[ 27.920218] groups: 1 0
[ 39.342652] CPU0 attaching NULL sched-domain.
[ 39.342666] CPU1 attaching NULL sched-domain.
[ 39.356173] CPU0 attaching sched-domain:
[ 39.356185] domain 0: span 0-1 level SIBLING
[ 39.356194] groups: 0 1
[ 39.356210] CPU1 attaching sched-domain:
[ 39.356218] domain 0: span 0-1 level SIBLING
[ 39.356226] groups: 1 0
[ 40.676303] CPU0 attaching NULL sched-domain.
[ 40.676318] CPU1 attaching NULL sched-domain.
[ 40.693973] CPU0 attaching sched-domain:
[ 40.693986] domain 0: span 0-1 level SIBLING
[ 40.693994] groups: 0 1
[ 40.694008] CPU1 attaching sched-domain:
[ 40.694015] domain 0: span 0-1 level SIBLING
[ 40.694021] groups: 1 0
[ 194.303330] Disabling lock debugging due to kernel taint
[ 194.323248] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[ 194.368963] ndiswrapper (import:242): unknown symbol:
ntoskrnl.exe:'IoWMIQueryAllData'
[ 194.368996] ndiswrapper (import:242): unknown symbol:
ntoskrnl.exe:'IoWMIOpenBlock'
[ 194.369871] ndiswrapper (load_sys_files:206): couldn't prepare
driver 'net8192se'
[ 194.371216] ndiswrapper (load_wrap_driver:108): couldn't load
driver net8192se; check system log for messages from 'loadndisdriver'
[ 194.379180] usbcore: registered new interface driver ndiswrapper
[ 223.209597] PPP BSD Compression module registered
[ 223.224079] PPP Deflate Compression module registered
[ 458.327930] CPU0 attaching NULL sched-domain.
[ 458.327952] CPU1 attaching NULL sched-domain.
[ 458.340136] CPU0 attaching sched-domain:
[ 458.340146] domain 0: span 0-1 level SIBLING
[ 458.340153] groups: 0 1
[ 458.340164] CPU1 attaching sched-domain:
[ 458.340169] domain 0: span 0-1 level SIBLING
[ 458.340174] groups: 1 0
[ 1099.728067] type=1503 audit(1280062747.109:20): operation="open"
pid=2281 parent=2274 profile="/usr/sbin/cupsd" requested_mask="w::"
denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB0"
[ 1099.728190] type=1503 audit(1280062747.109:21): operation="open"
pid=2281 parent=2274 profile="/usr/sbin/cupsd" requested_mask="w::"
denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB1"
[ 1099.728275] type=1503 audit(1280062747.109:22): operation="open"
pid=2281 parent=2274 profile="/usr/sbin/cupsd" requested_mask="w::"
denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB2"
[ 4823.852083] [drm] Big FIFO is enabled
[ 4843.906954] [drm] Big FIFO is enabled
[ 5746.328112] usb 3-1: USB disconnect, address 2
[ 5774.300073] usb 3-1: new low speed USB device using uhci_hcd and
address 3
[ 5774.477397] usb 3-1: configuration #1 chosen from 1 choice
[ 5774.496283] input: Logitech Logitech USB Optical Mouse as
/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input11
[ 5774.496810] generic-usb 0003:046D:C019.0002: input,hidraw0: USB HID
v1.11 Mouse [Logitech Logitech USB Optical Mouse] on
usb-0000:00:1d.1-1/input0
[ 5785.584464] CPU0 attaching NULL sched-domain.
[ 5785.584479] CPU1 attaching NULL sched-domain.
[ 5785.596687] CPU0 attaching sched-domain:
[ 5785.596699] domain 0: span 0-1 level SIBLING
[ 5785.596708] groups: 0 1
[ 5785.596724] CPU1 attaching sched-domain:
[ 5785.596732] domain 0: span 0-1 level SIBLING
[ 5785.596740] groups: 1 0
[ 5785.837493] CPU0 attaching NULL sched-domain.
[ 5785.837509] CPU1 attaching NULL sched-domain.
[ 5785.852673] CPU0 attaching sched-domain:
[ 5785.852684] domain 0: span 0-1 level SIBLING
[ 5785.852692] groups: 0 1
[ 5785.852707] CPU1 attaching sched-domain:
[ 5785.852714] domain 0: span 0-1 level SIBLING
[ 5785.852722] groups: 1 0
[ 5817.177060] CPU0 attaching NULL sched-domain.
[ 5817.177074] CPU1 attaching NULL sched-domain.
[ 5817.192702] CPU0 attaching sched-domain:
[ 5817.192714] domain 0: span 0-1 level SIBLING
[ 5817.192723] groups: 0 1
[ 5817.192738] CPU1 attaching sched-domain:
[ 5817.192746] domain 0: span 0-1 level SIBLING
[ 5817.192753] groups: 1 0
[ 5838.471932] type=1503 audit(1280067485.849:23): operation="open"
pid=2650 parent=2643 profile="/usr/sbin/cupsd" requested_mask="w::"
denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB0"
[ 5838.492214] type=1503 audit(1280067485.873:24): operation="open"
pid=2650 parent=2643 profile="/usr/sbin/cupsd" requested_mask="w::"
denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB1"
[ 5838.492329] type=1503 audit(1280067485.873:25): operation="open"
pid=2650 parent=2643 profile="/usr/sbin/cupsd" requested_mask="w::"
denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB2"
[ 7036.848110] hda-intel: azx_get_response timeout, switching to
polling mode: last cmd=0x021f0900
mavera@caspermini:~$

On 2 Ağustos, 17:49, ibrahim güven <ibrahimguve...@gmail.com> wrote:
> lspci çıktısını gönderebilir misin?
>

> 2010/8/1 Muhammed BÜYÜKKURT <selcuklubiyo...@gmail.com>

>
>
>
> > merhabalar
> > casper minibook aldim
> > ancak kablosuz internetii tanitamadim  bi turlu
> > guncelleme yapipp 10.4  kurdum ama yine care olmadi
> > acma kapama dugmesi de islemiyo
> > bios dan onboard devices diye de birsey yok
> > ne yapacam sasirdim
> > --
>
> > --
> > SELÇUK ÜNİVERSİTESİ LİNUX TOPLULUĞU"
> > linux-...@googlegroups.com

[pardusseven]

şu linkleri inceleyebilirsin, çözdüklerini söylüyorlar.

http://ohioloco.ubuntuforums.org/showthread.php?p=8831876

http://www.mail-archive.com/ubunt...@lists.ubuntu.com/msg1639385.html

[muhammedd yusuf]

bu adreslere girdim ama ne yapacağımı bulamadım linux backports u
yukleyince düzeldi falan diyor ama onu bulamadım

On 5 Ağustos, 14:22, pardusseven <ibrahimguve...@gmail.com> wrote:
> şu linkleri inceleyebilirsin, çözdüklerini söylüyorlar.
>
> http://ohioloco.ubuntuforums.org/showthread.php?p=8831876
>

> http://www.mail-archive.com/ubuntu-b...@lists.ubuntu.com/msg1639385.htmlyapacağımı

[muhammedd yusuf]

tamam backport u snaptic in içinde buldum ama kurarken hata veriyo,
fix broken packages diyorum yine olmuyo

On 6 Ağustos, 08:52, muhammedd yusuf <selcuklubiyo...@gmail.com>
wrote:

[ibrahim güven]

backport debian da da var, backport bir depodur, bu deponun paket  yöneticisine eklenmesi gerekir.


eklenmesi ile ilgili linkler:

https://help.ubuntu.com/community/UbuntuBackports
http://ubuntuguide.org/wiki/Ubuntu:Lucid

06 Ağustos 2010 10:05 tarihinde muhammedd yusuf <selcukl...@gmail.com> yazdı: