Re: Add SpacemiT K1 USB3.0 host controller support

[linux.r...@gmail.com]

This is an automated email and please do not reply to this email.

Dear Submitter,

Thank you for submitting the patches to the Linux RISC-V mailing list.

While preparing the CI tests, the patches you submitted couldn't be
applied to any of the current repository workflow branches.

----- Output -----
Failed to apply series 963878 to workflow__riscv__fixes:

Applying: dt-bindings: usb: dwc3: add support for SpacemiT K1
Applying: usb: dwc3: add common driver to support flattened DT
Applying: riscv: dts: spacemit: add usb3.0 support for K1
Patch failed at 0003 riscv: dts: spacemit: add usb3.0 support for K1

error: patch failed: arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts:28
error: arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts: patch does not apply
error: patch failed: arch/riscv/boot/dts/spacemit/k1.dtsi:4
error: arch/riscv/boot/dts/spacemit/k1.dtsi: patch does not apply
hint: Use 'git am --show-current-patch=diff' to see the failed patch
hint: When you have resolved this problem, run "git am --continue".
hint: If you prefer to skip this patch, run "git am --skip" instead.
hint: To restore the original branch and stop patching, run "git am --abort".
hint: Disable this message with "git config set advice.mergeConflict false"
---
Failed to apply series 963878 to workflow__riscv__for-next:

Applying: dt-bindings: usb: dwc3: add support for SpacemiT K1
Applying: usb: dwc3: add common driver to support flattened DT
Applying: riscv: dts: spacemit: add usb3.0 support for K1
Patch failed at 0003 riscv: dts: spacemit: add usb3.0 support for K1

error: patch failed: arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts:28
error: arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts: patch does not apply
error: patch failed: arch/riscv/boot/dts/spacemit/k1.dtsi:4
error: arch/riscv/boot/dts/spacemit/k1.dtsi: patch does not apply
hint: Use 'git am --show-current-patch=diff' to see the failed patch
hint: When you have resolved this problem, run "git am --continue".
hint: If you prefer to skip this patch, run "git am --skip" instead.
hint: To restore the original branch and stop patching, run "git am --abort".
hint: Disable this message with "git config set advice.mergeConflict false"
---
Failed to apply series 963878 to workflow:

Applying: dt-bindings: usb: dwc3: add support for SpacemiT K1
Applying: usb: dwc3: add common driver to support flattened DT
Applying: riscv: dts: spacemit: add usb3.0 support for K1
Patch failed at 0003 riscv: dts: spacemit: add usb3.0 support for K1

error: patch failed: arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts:28
error: arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts: patch does not apply
error: patch failed: arch/riscv/boot/dts/spacemit/k1.dtsi:4
error: arch/riscv/boot/dts/spacemit/k1.dtsi: patch does not apply
hint: Use 'git am --show-current-patch=diff' to see the failed patch
hint: When you have resolved this problem, run "git am --continue".
hint: If you prefer to skip this patch, run "git am --skip" instead.
hint: To restore the original branch and stop patching, run "git am --abort".
hint: Disable this message with "git config set advice.mergeConflict false"
---


Please resolve the issue and submit the patches again.

---
Regards,
Linux RISC-V bot