[PATCH] iscsi-target: Fix potential NULL pointer in solicited NOPOUT reject

[Nicholas A. Bellinger]

From: Nicholas Bellinger <n...@linux-iscsi.org>

This patch addresses a potential NULL pointer dereference regression in
iscsit_setup_nop_out() code, specifically for two cases when a solicited
NOPOUT triggers a ISCSI_REASON_PROTOCOL_ERROR reject to be generated.

This is because iscsi_cmd is expected to be NULL for solicited NOPOUT
case before iscsit_process_nop_out() locates the descriptor via TTT
using iscsit_find_cmd_from_ttt().

This regression was originally introduced in:

commit ba159914086f06532079fc15141f46ffe7e04a41
Author: Nicholas Bellinger <n...@linux-iscsi.org>
Date: Wed Jul 3 03:48:24 2013 -0700

iscsi-target: Fix iscsit_add_reject* usage for iser

Cc: sta...@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <n...@linux-iscsi.org>
---
drivers/target/iscsi/iscsi_target.c | 8 ++++++++
1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index 8fd359c..d062b09 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -1522,6 +1522,10 @@ int iscsit_setup_nop_out(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
if (hdr->itt == RESERVED_ITT && !(hdr->opcode & ISCSI_OP_IMMEDIATE)) {
pr_err("NOPOUT ITT is reserved, but Immediate Bit is"
" not set, protocol error.\n");
+ if (!cmd)
+ return iscsit_add_reject(conn, ISCSI_REASON_PROTOCOL_ERROR,
+ (unsigned char *)hdr);
+
return iscsit_reject_cmd(cmd, ISCSI_REASON_PROTOCOL_ERROR,
(unsigned char *)hdr);
}
@@ -1531,6 +1535,10 @@ int iscsit_setup_nop_out(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
" greater than MaxXmitDataSegmentLength: %u, protocol"
" error.\n", payload_length,
conn->conn_ops->MaxXmitDataSegmentLength);
+ if (!cmd)
+ return iscsit_reject_cmd(cmd, ISCSI_REASON_PROTOCOL_ERROR,
+ (unsigned char *)hdr);
+
return iscsit_reject_cmd(cmd, ISCSI_REASON_PROTOCOL_ERROR,
(unsigned char *)hdr);
}
--
1.7.2.5

[Nicholas A. Bellinger]

From: Nicholas Bellinger <n...@linux-iscsi.org>

(Re-send, with the correct patch this time..)

This patch addresses a potential NULL pointer dereference regression in
iscsit_setup_nop_out() code, specifically for two cases when a solicited
NOPOUT triggers a ISCSI_REASON_PROTOCOL_ERROR reject to be generated.

This is because iscsi_cmd is expected to be NULL for solicited NOPOUT
case before iscsit_process_nop_out() locates the descriptor via TTT
using iscsit_find_cmd_from_ttt().

This regression was originally introduced in:

commit ba159914086f06532079fc15141f46ffe7e04a41
Author: Nicholas Bellinger <n...@linux-iscsi.org>
Date: Wed Jul 3 03:48:24 2013 -0700

iscsi-target: Fix iscsit_add_reject* usage for iser

Signed-off-by: Nicholas Bellinger <n...@linux-iscsi.org>
---
drivers/target/iscsi/iscsi_target.c | 8 ++++++++
1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c

index 8fd359c..3a17930 100644

--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -1522,6 +1522,10 @@ int iscsit_setup_nop_out(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
if (hdr->itt == RESERVED_ITT && !(hdr->opcode & ISCSI_OP_IMMEDIATE)) {
pr_err("NOPOUT ITT is reserved, but Immediate Bit is"
" not set, protocol error.\n");
+ if (!cmd)
+ return iscsit_add_reject(conn, ISCSI_REASON_PROTOCOL_ERROR,
+ (unsigned char *)hdr);
+
return iscsit_reject_cmd(cmd, ISCSI_REASON_PROTOCOL_ERROR,
(unsigned char *)hdr);
}
@@ -1531,6 +1535,10 @@ int iscsit_setup_nop_out(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
" greater than MaxXmitDataSegmentLength: %u, protocol"
" error.\n", payload_length,
conn->conn_ops->MaxXmitDataSegmentLength);
+ if (!cmd)
+ return iscsit_add_reject(conn, ISCSI_REASON_PROTOCOL_ERROR,
+ (unsigned char *)hdr);
+
return iscsit_reject_cmd(cmd, ISCSI_REASON_PROTOCOL_ERROR,
(unsigned char *)hdr);
}

--
1.7.2.5