help with fingerprint on acer tm6292

[k0da]

Hello is TouchStrip Fingerprint Sensor (TCS4) in current version?
Im just trying to install bioapi. installation was ok but Sample
application just segfaults.

im running Suse linux enterprise desktop x86_64
bioapi 1.2.3
my hardware is Acer TM6292 i think it consists TouchStrip Fingerprint
Sensor (TCS4).
<6>usb 1-1: new device found, idVendor=147e, idProduct=2016
<6>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 1-1: Product: Fingerprint Sensor
<6>usb 1-1: Manufacturer: TouchStrip
<6>usb 1-1: configuration #1 chosen from 1 choice

k0da@laptop:~/Desktop/touchstrip> lsusb -s 01:03 -v

Bus 001 Device 003: ID 147e:2016
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x147e
idProduct 0x2016
bcdDevice 0.01
iManufacturer 1 TouchStrip
iProduct 2 Fingerprint Sensor
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
k0da@laptop:~/Desktop/touchstrip>

thanks for your help