6.00pre possible bug

[Leighton Man]

Hi,

I'm running Linrad on a pi400 with rtl2832 SDR and noticed the following:

Start program and select B for Normal CW

Left mouse click in the Hardware gain box anywhere except the up and down arrows and the program stops responding to mouse clicks. Also the F1 key for help doesn't work.

ESC produces normal shutdown so not a big problem.

Compiled the code on an x86 AMD machine running 64bit arch linux - same result.

Regards,

G8RTK

[Leif Asbrink]

Hi Leighton,

When you click one of the numeric fields you should get a blinking cursor.
Linrad will wait for your numeric input (or possibly esc) and the mouse
is frosen until your numeric value is confirmed by the Enter key.

Place the mouse on the hardware gain box and press F1 or '!'

If this did not help, write again and describe what happens on your system.

73

Leif

> --
> There is an excellent Linrad User Guide by Gaetan, ON4KHG, at:
> http://w3sz.com/Linrad%20Installation%20&%20Configuration%20User%20Guide%20-%20V1-0.pdf
> ---
> You received this message because you are subscribed to the Google Groups "Linrad" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linrad+un...@googlegroups.com.
> To view this discussion visit https://groups.google.com/d/msgid/linrad/9b0ee5ca-a8d6-42d8-9cec-de83008489c7n%40googlegroups.com.