ERROR 010658: Failure in distributed raster analytics operation.

[Melanie Baker]

Hi John,

Any idea on this error:

---------------------------------
Target core areas for core area #30 = [ 2 13 22 23]

---------------------------------
***Problem encountered executing statement:
"outCostDist = arcpy.sa.CostDistance(SRCRASTER, bResistance, cfg.TMAXCWDIST, back_rast);outCostDist.save(outDistanceRaster)"
The following ArcGIS error is being reported on line line 519 of "C:\circuitscape\linkage_mapper_3_1_0\toolbox\scripts\s3_calcCwds.py":
ERROR 010658: Failure in distributed raster analytics operation.
Failed to execute (CostDistance).


********************************************************
NOTE: Linkage Mapper tools often work best when run  from ArcCatalog instead of ArcMap.

That was try #2 of 20 for this core area.
Restarting iteration in 20 seconds.
---------------------------------


Best wishes,

Melanie

[John Gallo]

Hi Melanie,

If I got this error the first thing I would do is overlay the resistance surface as one color (e.g. green or greens) over the cores as another color (e.g. red).  Then look at the general location of core 30 to make sure there are no null values in the resistance surface over the core area.  This would show up as (e.g. red).  Then look at cores  2, 13, 22 and 23.  If that is not the problem pls send the entire log file.

Thanks,

John

--
You received this message because you are subscribed to the Google Groups "Linkage Mapper" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linkage-mappe...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/linkage-mapper/2b1301fa-0fbb-4b8f-8592-9c2b809c379en%40googlegroups.com.

--

John A. Gallo, Ph.D.

Project Director

LinkageMapper.org

and

Senior Conservation Scientist

Conservation Biology Institute

[Melanie Baker]

Hi John,

I've checked them all and the points are all covered by the raster, i.e. not on null values.

I've attached the log.

Thankyou,

Melanie

---

From: linkage...@googlegroups.com <linkage...@googlegroups.com> on behalf of John Gallo <john....@linkagemapper.org>
Sent: Thursday, November 30, 2023 9:14 PM
To: linkage...@googlegroups.com <linkage...@googlegroups.com>
Subject: Re: ERROR 010658: Failure in distributed raster analytics operation.

 

You received this message because you are subscribed to a topic in the Google Groups "Linkage Mapper" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/linkage-mapper/RuuFB7yXBjM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to linkage-mappe...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/linkage-mapper/CAEUWjEvVPWQt9ZzS-Zg__iV_SFsur%3Db%3D2tGd%3DZ1EHDfq-NOA%3DA%40mail.gmail.com.

[John Gallo]

Hi Melanie,

That is odd.  Maybe send me the cores and resistance layers and I can take a closer look and/or give it a spin.

Thanks,  

John

To view this discussion on the web visit https://groups.google.com/d/msgid/linkage-mapper/MN2PR02MB7072A3858CA61DDD2584ED8FF881A%40MN2PR02MB7072.namprd02.prod.outlook.com.

[Melanie Baker]

Hi John,

I've re-run the task after deleting the project folder and restarted the computer. Seems to have worked. Not sure why it did that though.

Melanie

---

From: linkage...@googlegroups.com <linkage...@googlegroups.com> on behalf of John Gallo <john....@linkagemapper.org>

Sent: Saturday, December 2, 2023 5:15 AM

To view this discussion on the web visit https://groups.google.com/d/msgid/linkage-mapper/CAEUWjEsm%2BLS4RZ2%3Djz9oKc-UfS5iOdvFwGWMxBFKZvEdr%2By9aw%40mail.gmail.com.

[John Gallo]

That is great Melanie, and thanks for the report out.  I've added that to the "living" troubleshooting doc. Thanks! John

To view this discussion on the web visit https://groups.google.com/d/msgid/linkage-mapper/MN2PR02MB7072BE5A092579F37BE65A13F886A%40MN2PR02MB7072.namprd02.prod.outlook.com.