Driver Goldcut Jk 721

[Nayme Cutforth]

Morningall! First timer here; I'm a high school teacher in Georgia and have recently acquired a previously owned Goldcut JK-series vinyl cutter; the number on the back is GC721. However, I wasn't given a disc with drivers or software or anything for using it and I can't find any place where I could download Windows 7 drivers for this printer. Does anyone know where I could get drivers and/or a copy of the software that the cutter comes with so I can start experimenting with it over the coming summer break?

You could also try the Signblazer software, which is an FREE trial and no longer supported. Or purchase your own cutting software. Example Flexistarter 10 is great cutting software, can be had for under $130 on EBAY. and you own it.

Goldcut Jk Series Driver ???? ???? Download File all! First timer here; I'm a high school teacher in Georgia and have recently acquired a previously owned Goldcut JK-series vinyl cutter; the number on the back is GC721. However, I wasn't given a disc with drivers or software or anything for using it and I can't find any place where I could download Windows 7 drivers for this printer. Does anyone know where I could get drivers and/or a copy of the software that the cutter comes with so I can start experimenting with it over the coming summer break?I may be jumping the gun, but, I received my new plotter a GC-721 goldcut. I got it before my vinyl order showed up so I installed the plotter pen and started my trial and error. I first ran the test function before connecting to my computer. drew the star w/ a box around it... didn't close the box.. now I am connected to SB trial and have done some simple text, and again doesn't close 1/2 the characters or more. I run the SB test sample, again its not closing everything.. Where do I look to correct this? or should I wait until I try to cut vinyl? if it doesn't plot continuous I dint see how it will cut differant..I followed that link for the set up of my cutter. I did have trouble setting up the drivers. the disc that came with the machine errored everytime, and I couldn't find any drivers for the GC-721 so I ran the MH-721 drivers. But as I stated it did this before the computer was ever connected with the self test in the machine.. When I plot it looks good just leaves a few mm open, and there is a dot on either side of were its open, indicating it is the machine stopping or starting the pen in these locations.. what would make it do this and is it correctable...Hello Hoppy, sorry you are having problems here. The blade offset is the setting that will fix the cuts not closing issue. The find the setting in SignBlazer click Cutter, then Setup, you will see the blade offset setting on this page. You will want to set that to .25 and move up/down by .05 until you get a perfect cut. Make sure you are sending the cuts from SignBlazer and not simply running a test cut. The test cuts will not be affected by this software change. If you are successfully outputting to your cutter then you have your USB driver setup properly. If this is not the case then please call us at 888-298-8143 for setup assistance.If the USB driver has installed. Ensure that you select JINKA or JINKA GOLDCUT and model JK-721. If this model is not selected the cutter plotter will not cut. When connecting the GoldCut to a Mac, a straightforward USB to USB connection from the cutter to the Mac computer does NOT usually work. But USB to serial with the FTDI chipset does work. So instead we need to connect via the COM port on the GoldCut cutter.Create your designs in the professional CorelDRAW or Adobe Illustrator design software, and then send it directly to your cutting plotter. Speed up your production workflow and make your work easier! The cutter manager module with over 700 device drivers provides perfect control of your vinyl cutter and cutting plotter. There is no better vinyl cutter plugin software than XFCut available anywhere else in the world today!Projected AISC for 2021 is approximately US$200 per ounce of gold higher than was projected in our news releases dated February 20, 2020 and May 8, 2020. The main drivers of the increase, which are partially offset by reduced cost in key consumables of approximately US$25 per ounce of gold, are listed below: 28789f854f

I may be jumping the gun, but, I received my new plotter a GC-721 goldcut. I got it before my vinyl order showed up so I installed the plotter pen and started my trial and error. I first ran the test function before connecting to my computer. drew the star w/ a box around it... didn't close the box.. now I am connected to SB trial and have done some simple text, and again doesn't close 1/2 the characters or more. I run the SB test sample, again its not closing everything.. Where do I look to correct this? or should I wait until I try to cut vinyl? if it doesn't plot continuous I dint see how it will cut differant..

I followed that link for the set up of my cutter. I did have trouble setting up the drivers. the disc that came with the machine errored everytime, and I couldn't find any drivers for the GC-721 so I ran the MH-721 drivers. But as I stated it did this before the computer was ever connected with the self test in the machine.. When I plot it looks good just leaves a few mm open, and there is a dot on either side of were its open, indicating it is the machine stopping or starting the pen in these locations.. what would make it do this and is it correctable...

Hello Hoppy, sorry you are having problems here. The blade offset is the setting that will fix the cuts not closing issue. The find the setting in SignBlazer click Cutter, then Setup, you will see the blade offset setting on this page. You will want to set that to .25 and move up/down by .05 until you get a perfect cut. Make sure you are sending the cuts from SignBlazer and not simply running a test cut. The test cuts will not be affected by this software change. If you are successfully outputting to your cutter then you have your USB driver setup properly. If this is not the case then please call us at 888-298-8143 for setup assistance.

If the USB driver has installed. Ensure that you select JINKA or JINKA GOLDCUT and model JK-721. If this model is not selected the cutter plotter will not cut. When connecting the GoldCut to a Mac, a straightforward USB to USB connection from the cutter to the Mac computer does NOT usually work. But USB to serial with the FTDI chipset does work. So instead we need to connect via the COM port on the GoldCut cutter.

Create your designs in the professional CorelDRAW or Adobe Illustrator design software, and then send it directly to your cutting plotter. Speed up your production workflow and make your work easier! The cutter manager module with over 700 device drivers provides perfect control of your vinyl cutter and cutting plotter. There is no better vinyl cutter plugin software than XFCut available anywhere else in the world today! 75035a25d1

Hello, I just moved to windows 11 because Bill Gates told me to do so. In windows 10, I already installed the CH340 driver for my nano and it worked fine. But when I installed windows 11, it uses the FTDI driver. So I tried installing the same ch340 driver. during the installation progress, it went bluescreen LMAO. Has anyone had success installing the CH340 driver in Gate's Windows 11?

FTDI driver781572 47.3 KB

I prefer the above approach because I avoid running manufacturer-provided driver installers due to the fact that they (manufacturers in general, not WCH specifically) tend to also install some useless bloatware in addition to the drivers. However, I have also had success (and no apparent bloatware) from this approach:

IKR dude, it worked for me in windows 10. but now for some reason, it automatically uses the FTDI driver.

image781572 52.1 KB

When I try to update the driver to the ch340 one. It went bluescreen. I have tried it like 10 times now.

Oh soo I actually have the FTDI controller not the CH340 thats why. After installing an old driver from FTDI and programming the Controllers' EEPROM I finally got it to work, thanks for all the replies.

Manually searching for drivers can be quite tiresome, as finding correct driver versions may be difficult for a casual user. Outbyte Driver Updater takes all the pain out of the process by automating both searching and updating your drivers. It scans your computer to identify currently installed devices and drivers, and recommends updates only from official sources, so you can relax when choosing which updates to apply.

Outbyte Driver Updater gives you a hand by figuring out which device drivers are outdated, corrupted, or missing from your device. Outdated device drivers can contain security or stability issues when not updated - they can even cause peripherals like the mouse or keyboard to stop working. Driver Updater helps avoid these issues with regular driver updates.

Outbyte Driver Updater can be configured to automatically check for driver updates five minutes after every Windows bootup, as well as letting you set up a daily, weekly, or monthly automatic scan. These automated scans allow you to relax, secure in the knowledge that you will be alerted to any available driver updates - all you have to do is select which ones to install.

To give you peace of mind when updating your drivers, Driver Updater includes backup functionality. Before updating any drivers, the backup feature allows you to save a copy of your current drivers, or you can simply rely on the automatic backup option that saves copies of drivers being updated. That way, if you ever run into any issues with an updated driver, you can choose to restore one or more of the backed-up drivers via the restore feature.

In addition to its main functionality, Driver Updater checks for potential tweaks, such as reducing CPU usage, extending battery life, preventing PC overheating, and more, which could be applied to optimize device performance and make your PC better fit your needs. You can review the suggested tweaks and apply all or individual ones.

3a8082e126