LiNC80

Yes, I agree that the 8080 code is less than ideal for reading, and as a result probably far from as

I note a lot of posts which seem to boil down to 115200 baud being too much for a Z80. However, not

Thank you for the reply Jon. Never worry about being busy because you know what comes next if you

The board fab I currently use is organized through Seeed Studio, and they do visual inspection but

Yes, there is a way to add executable files to the ROM. There is some information in the SCM user

ok, I found the 'heroes' from Startech left Pin 20 out. a few results JP1 is on the adapter

Good news. Very strange symptoms though. I really couldn't figure out how a fault could cause the

I think you are right that Z280RC won't see problems with mm8 and modchk5. I ran the mm8 with 5

Jon, to answer your last question first, Yup, still having issues with the A port. The B port works

A quick update for this topic, as it has spawned other posts, I wanted to post a conclusion to this

Does anyone need a ready-made implementation of the X-modem code (only reception from a PC on a Z80

Nice work as usual, Steve. And quick too, just two hours after my post! I have made a re-pack (just