UNITE7002 is Responding to SPI, but Not Configured Properly

[Fahad Al Malki]

Hello gents,

As the title says, we used to read/write from/to UNITE7002 via SPI. E.g.:

.ini content:

0x0023=0x5559

SPI Command:

0x80 0x23 0x55 0x59

It writes that just fine, but when we tried to get rid of the LMS Suit and USB, and sending the whole .ini content manually via SPI, we find out that the board is not configured yet!

Any suggestions please?

Best Regards ,,