To:digifi様
いつもお世話になっております。
apu2c4のセットアップで問題が発生しておりますので、お助けください。
apu2c4を導入すべくセットアップ中ですが、
サウンドデバイスを認識しない問題が発生しております・
シリアルコンソールでのログは
以下の★のように表示されています。
[ 1.706144] ALSA device list:
:
[ 2.094131] usb 2-1: New USB device found, idVendor=16d0, idProduct=07d7
[ 2.101079] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.108594] usb 2-1: Product: PCM-DSD USB Audio Interface
[ 2.114213] usb 2-1: Manufacturer: North Star Design srl
[ 2.119785] usb 2-1: SerialNumber: 413-001
[ 2.129357] xhci_hcd 0000:00:10.0: ERROR: unexpected command completion code 0x11.★
[ 2.137293] usb 2-1: Not enough bandwidth for altsetting 1
[ 2.149629] usb 2-1: Warning! Unlikely big volume range (=32767), cval->res is probably wrong.
[ 2.158735] usb 2-1: [10] FU [PCM Playback Volume] ch = 2, val = -32767/0/1
[ 2.170346] usb 2-1: Warning! Unlikely big volume range (=32767), cval->res is probably wrong.
[ 2.179324] usb 2-1: [10] FU [PCM Playback Volume] ch = 1, val = -32767/0/1
NASは正常にマウントされ、
音楽を再生すると以下のように表示されます。
Welcome to lightMPD
lightmpd login: [ 39.993668] xhci_hcd 0000:00:10.0: ERROR: unexpected command completion code 0x11.
[ 40.001715] usb 2-1: 2:1: usb_set_interface failed (-22)
これらの情報から何かわかりますでしょうか?
以下シリアルコンソールのログ一覧です。
--------------------------------------------------------------------------------
PCEngines apu2
coreboot build 20160307
4080 MB ECC DRAM
SeaBIOS (version ?-20160307_153453-michael-desktop64)
Found mainboard PC Engines PCEngines apu2
multiboot: eax=0, ebx=0
boot order:
1: /pci@i0cf8/usb@10/usb-*@1
2: /pci@i0cf8/usb@10/usb-*@2
3: /pci@i0cf8/usb@10/usb-*@3
4: /pci@i0cf8/usb@10/usb-*@4
5: /pci@i0cf8/*@14,7
6: /pci@i0cf8/*@11/drive@0/disk@0
7: /pci@i0cf8/*@11/drive@1/disk@0
8:
9: pxen0
10: scon1
11:
Found 21 PCI devices (max PCI bus is 03)
Copying SMBIOS entry point from 0xdffb7000 to 0x000f3110
Copying ACPI RSDP from 0xdffb8000 to 0x000f30e0
Copying MPTABLE from 0xdffdc000/dffdc010 to 0x000f2f30
Copying PIR from 0xdffdd000 to 0x000f2f00
Using pmtimer, ioport 0x818
Scan for VGA option rom
Running option rom at c000:0003
Google, Inc.
Serial Graphics Adapter 08/22/15
SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (wiv@coreboot-Virtual-Machine) Sat Aug 22 09:25:30 UTC 2015
Term: 80x24
IO4 0
Turning on vga text mode console
SeaBIOS (version ?-20160307_153453-michael-desktop64)
XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32 byte contexts
XHCI extcap 0x1 @ feb22500
XHCI protocol USB 3.00, 2 ports (offset 1), def 0
XHCI protocol USB 2.00, 2 ports (offset 3), def 10
XHCI extcap 0xa @ feb22540
Found 2 serial ports
ATA controller 1 at 4010/4020/0 (irq 0 dev 88)
EHCI init on dev 00:13.0 (regs=0xfeb25420)
ATA controller 2 at 4018/4024/0 (irq 0 dev 88)
Searching bootorder for: /pci@i0cf8/*@14,7
Searching bootorder for: /rom@img/memtest
Searching bootorder for: /rom@img/setup
Found sdcard at 0xfeb25500: SD card S08GE 7488MiB
XHCI port #3: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
XHCI port #4: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
Searching bootorder for: /pci@i0cf8/usb@10/storage@4/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@10/usb-*@4
USB MSC vendor='SanDisk' product='Cruzer Fit' rev='1.27' type=0 removable=1
USB MSC blksize=512 sectors=15633408
Initialized USB HUB (0 ports used)
All threads complete.
Scan for option roms
PCengines Press F10 key now for boot menu:
Searching bootorder for: HALT
drive 0x000f2e60: PCHS=0/0/0 translation=lba LCHS=973/255/63 s=15633408
drive 0x000f2e90: PCHS=0/0/0 translation=lba LCHS=954/255/63 s=15335424
Space available for UMB: c1000-ef000, f0000-f2e60
Returned 249856 bytes of ZoneHigh
e820 map has 7 items:
0: 0000000000000000 - 000000000009f800 = 1 RAM
1: 000000000009f800 - 00000000000a0000 = 2 RESERVED
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
3: 0000000000100000 - 00000000dffab000 = 1 RAM
4: 00000000dffab000 - 00000000e0000000 = 2 RESERVED
5: 00000000f8000000 - 00000000fc000000 = 2 RESERVED
6: 0000000100000000 - 000000011f000000 = 1 RAM
enter handle_19:
NULL
Booting from Hard Disk...
Booting from 0000:7c00
GRUB Loading stage1.5.
GRUB loading, please wait...
Booting 'lightMPD-64'
root (hd0,0)
Filesystem type is fat, partition type 0xc
kernel /boot/bzImage-64 root=/dev/ram0 ro console=ttyS0,115200n8 ramdisk_size=
65536 rootfstype=romfs clocksource=hpet rootdelay=5
[Linux-bzImage, setup=0x3c00, size=0x327900]
initrd /boot/initrd-lightmpd-64
[Linux-initrd @ 0x36ae6000, 0x1509ca8 bytes]
[ 0.000000] Linux version 4.4.0-rt3-lightMPD (araki@lmpddev) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #2 SMP PREEMPT RT Wed Jan 27 12:30:08 JST 2016
[ 0.000000] Command line: root=/dev/ram0 ro console=ttyS0,115200n8 ramdisk_size=65536 rootfstype=romfs clocksource=hpet rootdelay=5
[ 0.000000] KERNEL supported cpus:
[ 0.000000] AMD AuthenticAMD
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dffab000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xdffab max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f2f30-0x000f2f3f] mapped at [ffff8800000f2f30]
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] RAMDISK: [mem 0x36ae6000-0x37feffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F30E0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000DFFB80E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000DFFB96F0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000DFFB8250 001496 (v02 AMD COREBOOT 00010001 INTL 20140114)
[ 0.000000] ACPI: FACS 0x00000000DFFB8210 000040
[ 0.000000] ACPI: SSDT 0x00000000DFFB97F0 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: APIC 0x00000000DFFB9840 00007E (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HEST 0x00000000DFFB98C0 0001D0 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 0x00000000DFFB9A90 0048A6 (v02 AMD AGESA 00000002 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000DFFBE340 0007C8 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: HPET 0x00000000DFFBEB10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dffaafff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff]
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011ec00000 s86464 r0 d32320 u524288
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1027957
[ 0.000000] Kernel command line: root=/dev/ram0 ro console=ttyS0,115200n8 ramdisk_size=65536 rootfstype=romfs clocksource=hpet rootdelay=5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Memory: 4003140K/4177188K available (4340K kernel code, 379K rwdata, 1520K rodata, 708K init, 556K bss, 174048K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU kthread priority: 1.
[ 0.000000] NR_IRQS:4352 nr_irqs:1000 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 998.145 MHz processor
[ 0.000013] Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.29 BogoMIPS (lpj=998145)
[ 0.000015] pid_max: default: 32768 minimum: 301
[ 0.000040] ACPI: Core revision 20150930
[ 0.017062] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.017134] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.017138] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.017842] CPU: Physical Processor ID: 0
[ 0.017843] CPU: Processor Core ID: 0
[ 0.017847] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.017849] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[ 0.018485] Freeing SMP alternatives memory: 16K (ffffffff81911000 - ffffffff81915000)
[ 0.019311] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.232567] smpboot: CPU0: AMD GX-412TC SOC (family: 0x16, model: 0x30, stepping: 0x1)
[ 0.335055] Performance Events: AMD PMU driver.
[ 0.339645] ... version: 0
[ 0.343661] ... bit width: 48
[ 0.347785] ... generic registers: 4
[ 0.351799] ... value mask: 0000ffffffffffff
[ 0.357113] ... max period: 00007fffffffffff
[ 0.362425] ... fixed-purpose events: 0
[ 0.366438] ... event mask: 000000000000000f
[ 0.380708] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.391560] x86: Booting SMP configuration:
[ 0.395750] .... node #0, CPUs: #1 #2 #3
[ 0.415293] x86: Booted up 1 node, 4 CPUs
[ 0.419562] smpboot: Total of 4 processors activated (7985.16 BogoMIPS)
[ 0.427839] devtmpfs: initialized
[ 0.432039] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.443070] NET: Registered protocol family 16
[ 0.448156] ACPI: bus type PCI registered
[ 0.452190] PCI: Using configuration type 1 for base access
[ 0.457766] PCI: Using configuration type 1 for extended access
[ 0.472077] ACPI: Added _OSI(Module Device)
[ 0.476271] ACPI: Added _OSI(Processor Device)
[ 0.480748] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.485455] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.495674] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.515875] ACPI: Interpreter enabled
[ 0.519595] ACPI: (supports S0 S5)
[ 0.523009] ACPI: Using IOAPIC for interrupt routing
[ 0.528055] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.545432] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.551636] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI]
[ 0.558836] acpi PNP0A08:00: PCIe port services disabled; not requesting _OSC control
[ 0.566849] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
[ 0.577976] PCI host bridge to bus 0000:00
[ 0.582103] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.588894] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.595689] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.602568] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.609441] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.616335] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.624839] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.633898] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 0.639479] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.645132] pci 0000:00:02.4: PCI bridge to [bus 03]
[ 0.650906] ACPI: PCI Interrupt Link [INTA] (IRQs *3 5 7 10 11 12 15)
[ 0.657833] ACPI: PCI Interrupt Link [INTB] (IRQs *3 5 7 10 11 12 15)
[ 0.664772] ACPI: PCI Interrupt Link [INTC] (IRQs 3 *5 7 10 11 12 15)
[ 0.671687] ACPI: PCI Interrupt Link [INTD] (IRQs 3 5 *7 10 11 12 15)
[ 0.678663] ACPI: PCI Interrupt Link [INTE] (IRQs 3 5 7 10 *11 12 15)
[ 0.685574] ACPI: PCI Interrupt Link [INTF] (IRQs 3 5 7 *10 11 12 15)
[ 0.692442] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 0.697599] SCSI subsystem initialized
[ 0.701552] ACPI: bus type USB registered
[ 0.705611] usbcore: registered new interface driver usbfs
[ 0.711156] usbcore: registered new interface driver hub
[ 0.716562] usbcore: registered new device driver usb
[ 0.721836] pps_core: LinuxPPS API ver. 1 registered
[ 0.726819] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
giom...@linux.it>
[ 0.735991] PTP clock support registered
[ 0.739990] Advanced Linux Sound Architecture Driver Initialized.
[ 0.746112] PCI: Using ACPI for IRQ routing
[ 0.751222] clocksource: Switched to clocksource hpet
[ 0.756555] FS-Cache: Loaded
[ 0.759536] pnp: PnP ACPI init
[ 0.763138] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
[ 0.770441] pnp: PnP ACPI: found 3 devices
[ 0.781100] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 0.786078] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
[ 0.792180] pci 0000:00:02.2: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.798979] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.803956] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
[ 0.810084] pci 0000:00:02.3: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.816886] pci 0000:00:02.4: PCI bridge to [bus 03]
[ 0.821895] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
[ 0.828022] pci 0000:00:02.4: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.835038] NET: Registered protocol family 2
[ 0.840087] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.847645] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes)
[ 0.855711] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.862450] UDP hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.868692] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.875654] NET: Registered protocol family 1
[ 0.880354] RPC: Registered named UNIX socket transport module.
[ 0.886303] RPC: Registered udp transport module.
[ 0.891014] RPC: Registered tcp transport module.
[ 0.895722] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.908872] Trying to unpack rootfs image as initramfs...
[ 0.916178] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 0.985726] Freeing initrd memory: 21544K (ffff880036ae6000 - ffff880037ff0000)
[ 0.993101] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.999606] software IO TLB [mem 0xdbfab000-0xdffab000] (64MB) mapped at [ffff8800dbfab000-ffff8800dffaafff]
[ 1.009684] perf: AMD NB counters detected
[ 1.013816] perf: AMD L2I counters detected
[ 1.018120] LVT offset 0 assigned for vector 0x400
[ 1.018159] perf: AMD IBS detected (0x000000ff)
[ 1.029522] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 1.042599] FS-Cache: Netfs 'nfs' registered for caching
[ 1.048323] NFS: Registering the id_resolver key type
[ 1.053429] Key type id_resolver registered
[ 1.057646] Key type id_legacy registered
[ 1.061965] FS-Cache: Netfs 'cifs' registered for caching
[ 1.067550] Key type cifs.spnego registered
[ 1.071776] Key type cifs.idmap registered
[ 1.075889] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[ 1.084439] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.091872] io scheduler noop registered
[ 1.095816] io scheduler deadline registered
[ 1.100255] io scheduler cfq registered (default)
[ 1.105468] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 1.132782] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.145030] brd: module loaded
[ 1.152441] loop: module loaded
[ 1.156105] zram: Added device: zram0
[ 1.160138] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[ 1.167113] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.203646] pps pps0: new PPS source ptp0
[ 1.207684] igb 0000:01:00.0: added PHC on eth0
[ 1.212229] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 1.219107] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:41:5e:24
[ 1.226269] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
[ 1.231413] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 1.269544] pps pps1: new PPS source ptp1
[ 1.273609] igb 0000:02:00.0: added PHC on eth1
[ 1.278166] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 1.285070] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:41:5e:25
[ 1.292222] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
[ 1.297363] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 1.335567] pps pps2: new PPS source ptp2
[ 1.339603] igb 0000:03:00.0: added PHC on eth2
[ 1.344172] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 1.351055] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:41:5e:26
[ 1.358197] igb 0000:03:00.0: eth2: PBA No: FFFFFF-0FF
[ 1.363390] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 1.371041] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.377577] ehci-pci: EHCI PCI platform driver
[ 1.382355] ehci-pci 0000:00:13.0: EHCI Host Controller
[ 1.387605] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 1.395007] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.403718] ehci-pci 0000:00:13.0: debug port 2
[ 1.408375] ehci-pci 0000:00:13.0: irq 18, io mem 0xfeb25400
[ 1.419247] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
[ 1.425193] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.432007] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.439247] usb usb1: Product: EHCI Host Controller
[ 1.444137] usb usb1: Manufacturer: Linux 4.4.0-rt3-lightMPD ehci_hcd
[ 1.450577] usb usb1: SerialNumber: 0000:00:13.0
[ 1.455614] hub 1-0:1.0: USB hub found
[ 1.459414] hub 1-0:1.0: 2 ports detected
[ 1.463644] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.469922] ohci-pci: OHCI PCI platform driver
[ 1.474414] ohci-platform: OHCI generic platform driver
[ 1.479950] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.485218] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.492906] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
[ 1.502234] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.509056] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.516281] usb usb2: Product: xHCI Host Controller
[ 1.521177] usb usb2: Manufacturer: Linux 4.4.0-rt3-lightMPD xhci-hcd
[ 1.527625] usb usb2: SerialNumber: 0000:00:10.0
[ 1.532633] hub 2-0:1.0: USB hub found
[ 1.536463] hub 2-0:1.0: 2 ports detected
[ 1.540683] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.545916] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 1.553384] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.561591] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.568404] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.575656] usb usb3: Product: xHCI Host Controller
[ 1.580541] usb usb3: Manufacturer: Linux 4.4.0-rt3-lightMPD xhci-hcd
[ 1.586980] usb usb3: SerialNumber: 0000:00:10.0
[ 1.591894] hub 3-0:1.0: USB hub found
[ 1.595664] hub 3-0:1.0: 2 ports detected
[ 1.599955] usbcore: registered new interface driver uas
[ 1.605347] usbcore: registered new interface driver usb-storage
[ 1.611421] rtc_cmos 00:01: RTC can wake from S4
[ 1.616324] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.622493] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.629594] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 1.636499] usbcore: registered new interface driver snd-usb-audio
[ 1.642710] usbcore: registered new interface driver snd-usb-hiface
[ 1.649247] Initializing XFRM netlink socket
[ 1.653565] NET: Registered protocol family 17
[ 1.658045] NET: Registered protocol family 15
[ 1.662564] Key type dns_resolver registered
[ 1.667040] microcode: CPU0: patch_level=0x07030105
[ 1.667051] microcode: CPU1: patch_level=0x07030105
[ 1.667096] microcode: CPU2: patch_level=0x07030105
[ 1.667114] microcode: CPU3: patch_level=0x07030105
[ 1.667259] microcode: Microcode Update Driver: v2.01 <
tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.697902] rtc_cmos 00:01: setting system clock to 2016-03-25 04:17:02 UTC (1458879422)
[ 1.706144] ALSA device list:
[ 1.709116] No soundcards found.
[ 1.712904] Waiting 5 sec before mounting root device...
[ 1.767261] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.871258] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 1.988131] usb 1-1: New USB device found, idVendor=0438, idProduct=7900
[ 1.995123] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.004442] hub 1-1:1.0: USB hub found
[ 2.008616] hub 1-1:1.0: 4 ports detected
[ 2.009227] tsc: Refined TSC clocksource calibration: 998.128 MHz
[ 2.009234] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc65d64e77, max_idle_ns: 881590512558 ns
[ 2.094131] usb 2-1: New USB device found, idVendor=16d0, idProduct=07d7
[ 2.101079] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.108594] usb 2-1: Product: PCM-DSD USB Audio Interface
[ 2.114213] usb 2-1: Manufacturer: North Star Design srl
[ 2.119785] usb 2-1: SerialNumber: 413-001
[ 2.129357] xhci_hcd 0000:00:10.0: ERROR: unexpected command completion code 0x11.
[ 2.137293] usb 2-1: Not enough bandwidth for altsetting 1
[ 2.149629] usb 2-1: Warning! Unlikely big volume range (=32767), cval->res is probably wrong.
[ 2.158735] usb 2-1: [10] FU [PCM Playback Volume] ch = 2, val = -32767/0/1
[ 2.170346] usb 2-1: Warning! Unlikely big volume range (=32767), cval->res is probably wrong.
[ 2.179324] usb 2-1: [10] FU [PCM Playback Volume] ch = 1, val = -32767/0/1
[ 2.339212] usb 2-2: new high-speed USB device number 3 using xhci_hcd
[ 2.461840] usb 2-2: New USB device found, idVendor=0781, idProduct=5571
[ 2.468818] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.476322] usb 2-2: Product: Cruzer Fit
[ 2.480387] usb 2-2: Manufacturer: SanDisk
[ 2.484685] usb 2-2: SerialNumber: 4C530005940625113210
[ 2.491085] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 2.498654] scsi host0: usb-storage 2-2:1.0
[ 3.502877] 12 00 00 00 24 00
[ 3.506605] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Fit 1.27 PQ: 0 ANSI: 6
[ 3.515780] 00 00 00 00 00 00
[ 3.519455] 25 00 00 00 00 00 00 00 00 00
[ 3.524378] sd 0:0:0:0: [sda] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[ 3.532362] 1a 00 3f 00 c0 00
[ 3.536864] sd 0:0:0:0: [sda] Write Protect is off
[ 3.541907] 1a 00 3f 00 c0 00
[ 3.545940] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.555777] 00 00 00 00 00 00
[ 3.559491] 1e 00 00 00 01 00
[ 3.564498] (unknown ASC/ASCQ)
[ 3.567799] 00 00 00 00 00 00
[ 3.571792] 25 00 00 00 00 00 00 00 00 00
[ 3.577119] 1a 00 3f 00 c0 00
[ 3.581309] 1a 00 3f 00 c0 00
[ 3.585495] 28 00 00 00 00 00 00 00 08 00
[ 3.591123] sda: sda1
[ 3.594043] 00 00 00 00 00 00
[ 3.597690] 00 00 00 00 00 00
[ 3.601337] 25 00 00 00 00 00 00 00 00 00
[ 3.606226] 1a 00 3f 00 c0 00
[ 3.610334] 1a 00 3f 00 c0 00
[ 3.614327] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 6.719251] RAMDISK: gzip image found at block 0
[ 8.536404] VFS: Mounted root (romfs filesystem) readonly on device 1:0.
[ 8.543579] devtmpfs: mounted
[ 8.550010] Freeing unused kernel memory: 708K (ffffffff81860000 - ffffffff81911000)
[ 8.558216] Write protecting the kernel read-only data: 8192k
[ 8.566880] Freeing unused kernel memory: 1796K (ffff88000143f000 - ffff880001600000)
[ 8.581981] Freeing unused kernel memory: 528K (ffff88000177c000 - ffff880001800000)
setup /var OK
[ 8.701231] 00 00 00 00 00 00
[ 8.705015] 28 00 00 00 08 00 00 00 01 00
[ 8.710292] 28 00 00 00 09 f8 00 00 01 00
[ 8.715365] 28 00 00 00 09 f9 00 00 01 00
[ 8.720453] 28 00 00 00 09 fa 00 00 01 00
[ 8.725559] 28 00 00 00 09 fb 00 00 01 00
[ 8.730680] 28 00 00 00 09 fc 00 00 01 00
[ 8.735726] 28 00 00 00 09 fd 00 00 01 00
[ 8.740706] 28 00 00 00 09 fe 00 00 01 00
[ 8.745928] 28 00 00 00 09 ff 00 00 01 00
[ 8.751161] 28 00 00 00 0a 00 00 00 01 00
[ 8.756275] 28 00 00 00 0a 01 00 00 01 00
[ 8.761425] 28 00 00 00 0a 02 00 00 01 00
[ 8.766585] 28 00 00 00 0a 03 00 00 01 00
[ 8.771705] 28 00 00 00 0a 04 00 00 01 00
[ 8.776849] 28 00 00 00 0a 05 00 00 01 00
[ 8.781966] 28 00 00 00 0a 06 00 00 01 00
[ 8.787138] 28 00 00 00 0a 07 00 00 01 00
[ 8.792319] 28 00 00 00 0a 08 00 00 01 00
[ 8.797427] 28 00 00 00 0a 09 00 00 01 00
[ 8.802508] 28 00 00 00 0a 0a 00 00 01 00
[ 8.807696] 28 00 00 00 0a 0b 00 00 01 00
[ 8.812812] 28 00 00 00 0a 0c 00 00 01 00
[ 8.818139] 28 00 00 00 0a 0d 00 00 01 00
[ 8.823305] 28 00 00 00 0a 0e 00 00 01 00
[ 8.828425] 28 00 00 00 0a 0f 00 00 01 00
[ 8.833572] 28 00 00 00 0a 10 00 00 01 00
[ 8.838670] 28 00 00 00 0a 11 00 00 01 00
[ 8.843894] 28 00 00 00 0a 12 00 00 01 00
[ 8.849055] 28 00 00 00 0a 13 00 00 01 00
[ 8.854193] 28 00 00 00 0a 14 00 00 01 00
[ 8.859400] 28 00 00 00 0a 15 00 00 01 00
[ 8.864432] 28 00 00 00 0a 16 00 00 01 00
[ 8.869688] 28 00 00 00 0a 17 00 00 01 00
[ 8.874721] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 8.885049] 28 00 00 00 08 08 00 00 01 00
[ 8.890286] 28 00 00 00 0a 18 00 00 01 00
[ 8.895524] 28 00 00 00 0a 19 00 00 01 00
[ 8.900707] 28 00 00 00 0a 1a 00 00 06 00
copy conf file lightmpd.conf [ 8.909246] 28 00 00 00 0b c0 00 00 04 00
mpd.conf [ 8.920870] 28 00 00 00 17 f0 00 00 06 00
sysctl.conf [ 8.936994] 28 00 00 00 17 f8 00 00 01 00
OK
config [ 9.903225] 28 00 00 00 11 d8 00 00 20 00
[ 9.909261] 28 00 00 00 08 09 00 00 01 00
[ 9.914495] 28 00 00 00 11 f8 00 00 40 00
[ 9.920812] 28 00 00 00 12 38 00 00 80 00
[ 9.928684] 28 00 00 00 12 b8 00 00 f0 00
[ 9.938101] 28 00 00 00 13 a8 00 00 10 00
[ 9.943951] 28 00 00 00 13 b8 00 00 f0 00
[ 9.953377] 28 00 00 00 14 a8 00 00 10 00
[ 9.959410] 28 00 00 00 14 b8 00 00 f0 00
[ 9.968815] 28 00 00 00 15 a8 00 00 10 00
[ 9.974311] 28 00 00 00 15 b8 00 00 f0 00
[ 9.983724] 28 00 00 00 16 a8 00 00 10 00
[ 9.989283] 28 00 00 00 16 b8 00 00 f0 00
[ 9.998633] 28 00 00 00 17 a8 00 00 10 00
[ 10.004050] 28 00 00 00 17 b8 00 00 33 00
pid 105's current scheduling policy: SCHED_FIFO
pid 105's current scheduling priority: 50
pid 105's new schedu[ 10.026367] 2a 00 00 00 0a 18 00 00 01 00
ling policy: SCHED_FIFO
pid 105[ 10.034540] 00 00 00 00 00 00
's new schedulin[ 10.038860] 00 00 00 00 00 00
g priority: 99
[ 10.043655] 00 00/var/lightMPD/bi 00 00 00 00
n/setup.sh: line 96: handler: not found
OK
sysctl vm.swappiness = 0
kernel.sched_rt_runtime_us = -1
kernel.sched_rt_period_us = 10000
kernel.printk = 4 4 1 4
OK
Starting logging: OK
Initializing random number generator... read-only file system detected...done
Starting rpcbind: OK
Starting network...
waiting eth0 link up ...linked up
Getting initial time via ntp.
NAS mount OK
set affinity type 0 ((ehci_hcd:usb1 FIFO:99) (ohci_hcd:usb4 FIFO:99)) OK
thttpdtelnetd started
Starting mpd: OK
webconsole started
Welcome to lightMPD
lightmpd login: [ 39.993668] xhci_hcd 0000:00:10.0: ERROR: unexpected command completion code 0x11.
[ 40.001715] usb 2-1: 2:1: usb_set_interface failed (-22)
[ 42.310196] xhci_hcd 0000:00:10.0: ERROR: unexpected command completion code 0x11.
[ 42.318200] usb 2-1: 2:1: usb_set_interface failed (-22)
[ 43.146438] xhci_hcd 0000:00:10.0: ERROR: unexpected command completion code 0x11.
[ 43.154620] usb 2-1: 2:1: usb_set_interface failed (-22)
[ 43.413058] xhci_hcd 0000:00:10.0: ERROR: unexpected command completion code 0x11.
[ 43.421073] usb 2-1: 2:1: usb_set_interface failed (-22)
[ 43.624620] xhci_hcd 0000:00:10.0: ERROR: unexpected command completion code 0x11.
[ 43.632773] usb 2-1: 2:1: usb_set_interface failed (-22)
[ 60.137941] xhci_hcd 0000:00:10.0: ERROR: unexpected command completion code 0x11.
[ 60.149316] xhci_hcd 0000:00:10.0: ERROR: unexpected command completion code 0x11.
[ 65.640379] xhci_hcd 0000:00:10.0: ERROR: unexpected command completion code 0x11.
[ 65.648339] usb 2-1: 2:1: usb_set_interface failed (-22)
[ 67.346593] xhci_hcd 0000:00:10.0: ERROR: unexpected command completion code 0x11.
[ 67.354711] usb 2-1: 2:1: usb_set_interface failed (-22)