Lightjams

To send midi from your DAW to Lightjams running on the same computer, use loopMidi (https://www.

Hi, Unfortunately, there's no easy way to bypass the master intensity. You'd need to put back

Hi, yes, the spikes are clearly visible in the monitor. Strange stuff. I have two gigs with Lightjams

>> I noticed that the lower and upper frequency range is actually 1-500HZ at its lowest and

Hi, The osc.send function only sends when the value changes. This is to avoid sending endlessly the

Yes tested this now, and I have a button on TouchOSC that "refreshes" all the TouchOSC with

That's Right... I also use in much cases but not for Timing because in my case cantabile is not

Thank Matthieu,, this functionality completes lightjams for me. Regards, Rupert

great, I'll check that out, thanks! On Wednesday, October 3, 2018 at 1:21:21 PM UTC-4, Mathieu

Just to confirm, Lightjams is running fine now, right? What did you need to do to fix the problem? I

An alternative solution is to link all Verse, Bridge and Chorus grids to the same PAD buttons. And

Just to clarify, when using Lemur to send OSC to Lightjams, you should use the Lightjams OSC mapping

Lightjams only sends OSC values when they change. So for the moment, you need to force changes. One

>> xtopercent(counter(0, grid.lastX, onbeat(osc(17)), 0, grid.onactivated)) This function

Hi Jack! Try using the same output address as the input one. TouchOSC works like that. If it sends

Personally, since I've found TouchOSC (http://hexler.net/software/touchosc), that's my

Hi Linus, If I understand correctly, you have a source linked to a osc input value and you want it to