Help me with a mk3

[Leover García]

Hi everyone.

Could you help me find someone who can help me operate this device: https://www.advateklighting.com/products/a4-s-mk3

The software I want to use is LightJams, but I'm not sure if it can do something similar to what I'll show in the attached video.

Unlike DMX, I think pixel mapping should be used.

MK3

[Mathieu]

Hi,

You can use LJLM (https://www.lightjams.com/ljlm/) to control LEDs using the Advatek A4-S Mk3. LJLM is a led mapping software. Lightjams is also able to do led mapping but you need to work with a grid layout. With both software, you send DMX to the Advatek controller using the Art-net or sAcn protocol.

[Leover]

Where can I find information about this Art-net or sAcn protocol?

I'm new to this and would like to know if there's a video tutorial for mapping.

--
You received this message because you are subscribed to the Google Groups "Lightjams" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lightjams+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/lightjams/f7525623-591f-4edc-9c4e-ba09023d28acn%40googlegroups.com.

[Mathieu]

Art-net and sAcn are network protocols to send DMX over the network. Lightjams and LJLM sends DMX via the network to the Advatek controller. The Advatek user manual contains the setup information.

[Leover García]

Hi Mateo, do you have the contact information for someone who can help me configure pixel mapping with the software?