Alldata Disc Copy Utility Download

[Alcides Karlen]

How to Download and Use the Alldata Disc Copy UtilityIf you are an Alldata user, you may want to copy your Alldata Repair DVDs to your computer's hard drive for faster and easier access. This can also prevent data loss or damage due to scratched or misplaced discs. To do this, you will need to download and use the Alldata Disc Copy Utility, a program that allows you to copy the disc information to your hard drive.

Alldata disc copy utility download

Download File https://t.co/rdcS5NGlno

In this article, we will show you how to download and use the Alldata Disc Copy Utility step by step.

How to Download the Alldata Disc Copy UtilityTo download the Alldata Disc Copy Utility, you will need to visit the Download Center on the Alldata website[^1^]. There, you will find two options: ALLDATA Repair Application Installer and ALLDATA Diagnostics - Vehicle Connection Interface (VCI). You will need to download both of them.

The ALLDATA Repair Application Installer is the program that installs the latest version of ALLDATA Repair (DVD) on your computer. You will need this before you can copy the new DVDs. The ALLDATA Diagnostics - Vehicle Connection Interface (VCI) is the device driver and updater utility for the VCI device that connects your computer to the vehicle for diagnostics. You will need this if you want to use the ALLDATA Diagnostics feature.

To download each option, click on the Download button and follow the instructions on the screen. You may need to enter a password to run the VCI Updater Utility. The password is alldata.

How to Use the Alldata Disc Copy UtilityTo use the Alldata Disc Copy Utility, you will need to have enough space on your hard drive to save the discs. As of August 2013 (Q313), the total space needed for all 86 data discs is 558 GB. You will also need to have at least 10-15% available space left after copying the discs for your hard drive to function properly.

If you do not have enough space on your hard drive, you can either delete unneeded files, install additional memory, save the discs to an external hard drive, or install only those discs that you use most frequently.

Once you have enough space on your hard drive, follow these steps to use the Alldata Disc Copy Utility:

Close all programs, including ALLDATA Repair.Open the Disc Copy Utility by clicking Start >> Programs or All Programs >> ALLDATA >> ALLDATA Disc Copy.The DiscCopy - Introduction screen opens. Click Next.The DiscCopy - Step 1 of 6 - Select Data To Copy screen opens. Click Check All. Scroll to the bottom of the list and uncheck the last three boxes: Service Advisor Disc1 , Disc 2 and Disc 3. These discs are not needed if you have the DATA discs, which contain all of the service advisor information. If your computer has more than one DVD drive, make sure the correct drive is showing in the drop-down box. Click Next.The DiscCopy - Step 2 of 6 - Remove Existing Data screen opens. If there were previous discs copied, they would show up here with check boxes. Place a check next to each previous version so that the space is cleared up in your hard drive. Whether you have boxes to check or not, click Next.The DiscCopy - Step 3 of 6 - Select Location Where Data Will Be Copied screen opens. Choose a location on your hard drive where you want to save the discs. You can either use the default location or browse for a different one. Click Next.The DiscCopy - Step 4 of 6 - Insert Data DVD screen opens. Insert disc number 1 into your DVD drive and click Next.The DiscCopy - Step 5 of 6 - Copying Data screen opens. The program will start copying disc number 1 to your hard drive. This may take several minutes depending on your computer speed and DVD drive speed. When it is done, you will be prompted to insert disc number 2 and click Next. Repeat this process until all discs are copied.The DiscCopy - Step 6 of 6 - Finish screen opens. Click Finish to exit

 35727fac0c