EZBoard wifi problem

[ulf...@gmail.com]

Hi,

I've just received an EZboard WiFi. I've followed the steps presented here:
http://lelylan.github.io/lab-projects/ezcontrol-light/

Everything works until the board is supposed to initialize the wifi connection. The serial output gets stuck after these messages:

[CC3000] Hi there
[CC3000] Init the WiFi connection

I've been waiting at least 10 min, so something does not work correctly. At that point, no wifi settings has been sent to "cc3000", so that should not be the issue.

[p.ko...@gmail.com]

I'm having exactly the same problem with the EZboard WiFi: not initializing the wifi connection.

When I run the buildtest-example (which is part of the Adafruit CC3000 Library) the same happens:

after the serial message "Initialising the CC3000 ..." nothing happens..

[arch...@gmail.com]

Hi!

I'm facing the same problem here. 

Is there any schematic available for the EZ control board?

[ulf...@gmail.com]

Not that I know of. Doesn't seem to be open source.

[Lelylan Touch]

Hi everyone, 

it's Andrea of Lelylan talking. 

The EZBoard Made in Italy sent us last summer, where we made all the tests was connecting to the WiFi network without any problem. I'll write to Luigi of Made in Italy to better understand why some of you are having this problem. In the meantime I would ask you guys to tell me the OS you are using, so that we can better investigate, also inside at Lelylan.

Thanks in advance and sorry once more in advance for the problems.

Best, 

On 29 May 2015 at 21:54, <ulf...@gmail.com> wrote:

Not that I know of. Doesn't seem to be open source.

--
You received this message because you are subscribed to the Google Groups "Lelylan" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lelylan+u...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

Andrea Reginato

Lelylan, Building the Connected Home
http://lelylan.com

[p.ko...@gmail.com]

Hi Andrea, thanks for your reply and reaching out to Luigi of Made in Italy.
I'm using Windows 8.1 (64 bit).
Regards.

[ulf...@gmail.com]

I'm using Crunchbang 10, 32 bit (linux, debian based distribution)

[arch...@gmail.com]

I'm using OS X 10.10.

[Corrado Brena]

I'm using Windows 7 pro 64bit.

I have done some debug. it seems me that the sw blocks calling the routine 

 wlan_start(patchReq); 

Regards Corrado

[Lelylan Touch]

Thanks everyone, 

I'll forward and push for getting an answer from Made in Italy.

--

You received this message because you are subscribed to the Google Groups "Lelylan" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lelylan+u...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Lelylan Touch]

Little update. I don't know if you guys where able to solve the problem, as Made in Italy didn't answer back (yet).

We made some tests with the hardware we received last summer and it just connect to the wifi. I think some changes has beed done.

I'll keep you updated on any improvement we can make.

All the best and thanks.

[p.ko...@gmail.com]

I still have the same problem with the EZboard not connecting to wifi.

I hope Made in Italy will come with a solution. Without wifi the EZboard can't connect to Lelylan. Then the board loses much of it's functionality.

[CallMeYaz]

I can't get my board t connect to WiFi either. Please help!

Ron

[Lelylan Touch]

Little Update from Lelylan Team.

We were able to get in touch with Made in Italy by phone. Luigi told us that all the boards were able to connect to the Internet and that most probably there are some missing configurations or lib installations. He told us he will prepare the needed documentation and share it with us. 

We'll be pushing to have it available as soon as possible to let you guys move forward.

Sorry a lot for all these issues.

[mullig...@gmail.com]

Please keep me posted on the Wi-Fi issue with the EZBoards.
And a schematic and pinout diagram would be handy too.

We all know things are running late with this project, which is common in new product development.
I give you guys a lot of credit for hanging in there, delivering our boards, and I'm hopeful you have enough energy left in you to work through these final issues.

Regards
Joe

[oto...@gmail.com]

Right you geniuses...

The temp sensor is on A3

The relay is on 7

The settings for the Sparkfun libraries at: https://www.sparkfun.com/products/12072 are:

#define CC3000_INT      2   // Needs to be an interrupt pin (D2/D3)

#define CC3000_EN       8   // Can be any digital pin

#define CC3000_CS       10  // Preferred is pin 10 on Uno

I have the wi-fi etc working

[CallMeYaz]

Thanks for the help. I am able to publish updates to Lelylan, but cannot receive anything from them. Maybe it can't get through my firewall?

[oto...@gmail.com]

Hi CallMeYaz,

Sorry I cannot help you there.
I got the hardware to do my own thing with and not to connect to Lelylan.
However, now that you have the basic connectivity going I should think/hope that Lelylan support can help you out here.
They are pretty active on this group so here's hoping....

-otoolo

[Lelylan Touch]

Hi everyone, 

I'm happy you are making some progresses on the usage of the EZ. 

I'm sorry about the fact that the Made in Italy didn't send us any documentation, but we're trying to force them to give us all the "docs" can help you guys.

@CallMeYaz, can you send us your sketch. This way we can test it on our hardware and give you some feedback on the problem you are facing. And congrats for being able to make it up and running. We're looking forward to create a good piece of docs, also without the eventual partecipation of Made in Italy.

All the best. 

--

You received this message because you are subscribed to the Google Groups "Lelylan" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lelylan+u...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[CallMeYaz]

Did you receive the email with my sketch?

[Lelylan Touch]

Hi there, 

sorry for the delay. Yes, we received the email with the sketch. We've scheduled a day to test it out next week, so that we can get back with some more useful information pretty soon.

All the best.