Logo Soft Comfort V4 0 Download [WORK]
Juven Richter
Does anybody know a way to convert a Schneider program to a Siemens one? I once heard someone mention a Schneider Zelio Soft Converter software, but I haven't found anything about it anywhere. Or should I do it manually?
If you're trying to listen to data on a TCP port, a system would have to specifically open a socket to your specific IP address (or you'd have to connect to the port on the remote system) - TCP is targeted, meaning it's a 1-to-1 protocol. Unless your Siemens PLC knows about your presence and directly sends you information, you won't receive anything from it. You cannot "listen in" on TCP conversations happening (without specific hardware, hardware configurations, or packet mirroring/monitoring functionality on the switches being used). You likely will never see this traffic in WireShark unless the traffic is specifically being sent to YOU, or you've got one of the aforementioned hardware/software configurations that allows you to see it. In short, it's not likely you're ever going to be able to just "eaves drop" on a TCP conversation. With TCP, your best bet is to initiate the conversation yourself (though you have to know how to do that with the Siemens PLC).
EDIT: Page 32 of the Siemen's LOGO! user manual says that you can only create a network topology with a Siemen's LOGO! through the use of their LOGO!Soft Comfort V7.0 software. This usually means the network communication is proprietary, and they're not going to tell you how to communicate with the device via generic TCP/IP. I guess that's what happens when you use a PLC.
df19127ead