What Is Dynazip
Pang Murdock
I have searched through all the forums and the advise was to upgrade to the current version, but it still doesnt work, asked to add the -q in the shortcut, that also is not working, its really frustrating because syncing is halted when that happens
Well error didn't budge and go away for any of my attempts. Ended up creating a program to automatically acknowledge the worksheet error and create again. This gave some relief acknowledging the error 401 worksheet for many stores, so it won't stop the communication when the server is not attended. Also, wrote a batch file to keep cleaning the QS* temp files.
You were wise not to download that file in the link provided Michael. As these forums are monitored by Microsoft, I am somewhat unsure why he provided the link in the first place. The page is attempting to appear to be Microsoft, when in fact it is not. Good choice.
Connection times should be minimally 15 minutes apart that doesn't mean they will be offline 15 minutes. That means each machine scheduled connection time is every 15 minutes. They are only offline for the amount of time necessary to transmit the data. If they can't do it within 5 minutes because you choose not to adjust the connection times as I suggested? Then you will need to become accustomed to the dynazip error Michael, as it isn't going to go away. You can then explain to your client why you can't fix it.
I'd also ensure in Management Studio on the connection tab for the server is set to 0, the memory tab reflects half of the servers physical memory, with a maximum timeout of 600. Have a wonderful day.
However with the way we are running RMS across 25 shops with integration into other applications like MS SharePoint, we cant afford a connection time out of more than 5 minutes,data needs to be exchanged within every 5 minutes, anything more than that will cause our client greatly.
If your still experiencing the error after applying the negative Q then I suggest you go into each store and adjust the connection times which should have been done anyway. Set them 15-30 minutes apart instead of no connection times where ever set up or multiple stores trying to connect at the exact same time or too closely together. When they bump into each other because the times aren't configured properly Michael.
the -q wasn't a required step unless you updated to just the hotfix listed that required it. If you updated to CU 5 it wasn't a requirement and if you are continuing to get this error? there could be multiple reasons. I recommend that you check on the more recent hotfixes as presently I'm running 2.0.2017 or open a service request to obtain it. Thanks.
A Dynazip error usually indicates that either some program used by your computer is corrupting the update file when it is downloaded or being unzipped on your computer (see next section), a file necessary to unzip update files is missing from your computer (see Specified module not found section below), or a damaged update file is blocking subsequent updates. Close CTI Navigator and all other programs (especially any email antivirus or security program), and try updating again before attempting a fix described below.
If emptying the Update folder does not fix the error, follow the instructionsbelow to ensure that your Internet Firewall or Internet Securityprogram is set to always allow CTI Navigator to access the Internet anddownload files.
If the dynazip error persists, temporarily turn off all the programs that startup every time Windows starts - one of which may be interfering with the update. To disable startup items, follow the instructions at Disable Unnecessary Windows Startup Items in the related articles below. Essentially these steps are:
If ccApp.exe is one of your StartUp Items, ensure it is not checked. Norton's ccApp.exe file should run only after Windows loads all its files and not as part of the Windows startup. (See Disable Unnecessary Windows Startup Items in the related articles below for instructions on how to install Norton's ccApp to run automatically but not interfere with other programs). Then manually update CTI Navigator (select Start > Programs > CTI Navigator > Update Manager > Update button).
A Dynazip DLL error that "Specified module not found" indicates that some security program used on your computer has removed (or quarantined) files necessary to unzip update files or zip files to send to the MLS server. To install the missing files:
Preface
-------------------------
This Software Status Bulletin (SSB) documents all known problems in the software
product designated above. The SSB is derived from Known Problem Reports (KPR)
which result from user problems that have been classified as documentation
problems or software defects. When a KPR is written, an identifying number is
assigned to it, and the KPR is added to the next edition of the SSB. User inputs that have been classified as Enhancement Requests are not documented
in the SSB. User problems that have been submitted, but that have not been
classified by the time the SSB is generated are not included in the SSB.How to use the SSB
-------------------------
When you experience a problem with a product, first check this SSB to see if the
problem has been reported already, and if there is a temporary workaround
available for the problem, or if the problem has already been fixed by a new
revision. If the problem is not listed in this SSB then you may wish to report
it to the Response Center or to your field support representative.
To determine if your problem is documented in this SSB, first look in the
Keyword Index section of the SSB. Under each keyword is a listing of one-line
descriptions of related KPRs. If any of these sound like yours, locate the KPR
# in the Known Problem Reports section of the SSB, and read the full KPR. The
KPRs in the Known Problem Reports section are sorted by KPR #.
There are two sections in the SSB:
Keyword Index: This index is categorized by keyword. For each KPR there is a
brief description and a KPR #. A KPR may be associated with more than one
keyword.
Known Problem Reports: This section contains KPRs, with all the available
information relevant to the problem. KPRs in this section are sorted by KPR #.Keyword Glossary
Problem:
During run a stop is requested to the Software.Opening the User Interface where the system is shown the Initial pump parameters were not loaded.It was still A: 99.84% B: 0.16% instead of A:100% and B:0%.Loading the Default method still the gradient is wrong displayed in UI.
Problem:
Tried to configure a four channel 490 micro GC. After clicking on Activate Communication button, the Configure screen indicates that communication has been established, but the information for the 4 channels has not been uploaded. Information is provided when connecting with PROstation.
Problem:
6890: Add\Advanced Tower Selection Syring Volume does not update until session is closed/reopened.For any Add step, select Advanced. The volume determines which tower will be used if automatically select by volume is selected (default). The Syringe Volume of that injector is displayed read-only below it.If you go to the Configuration and change the syringe size for any tower, then add a new Add step, save and return, this syringe Volume change is not detected or displayed. It is only refreshed by closing and reopening the online session of ChemStation.
Problem:
No Injection Calibration Blanks from Easy Sequence using an Easy SamplePrep program with 'Use for unknowns only' checked reserves resources, even though the Easy SamplePrep program does not run in this case.
Temporary Solution:
Check results of analytical results evaluation, what adducts apply to what compounds / samples.Create separate tasks for each ionic species.Uncheck "Use same ion species as in analytical run" in preparative system ion species of the task.Within one task you select only one adduct in preparative system and select all samples, which compounds havea good response for this adduct.
Problem:
When creating an Easy Sequence template and select the sequence location funcion, the software displays the normal windows function for selecting a directory / sub-directlry. This is wrong. The software should show the selection of sequence locations as specified in the sequence preferences.
Problem:
In the Easy Sequence Setup, a method is selected and then the vial numbers are entered. These vial numbers are passed to the data system to be validated. The validation occurs against the currently loaded method, not the method used in the template that will actually use the vials.
Problem:
When a Task is running the "Stop" will lead to a Task contents to be not complete.The ACAML file created at the end of the acquisition is not present.The sample present during the acquisition is not listed.
Temporary Solution:
Analytical runs by purification software, will not display analytical results in case of STOP.Workaround: Create a new task and import the analytical run as result set:Stopped sample and later samples will be missing, but first samples will be displayed.Preparative runs by purification software will not display stopped sample and beyond.
Problem:
When bracketing is used with Easy Sequence with Unique Folder Creation OFF, data file names can not be generated for the calibration runs. The potential exists to overwrite files when using Bracketing with Unique Folder Creation OFF with Easy Sequence.
Problem:
If you have a 10 ul syringe installed and specify a 10 ul injection volume, the system will not indicate any problem until runtime. This is because the driver cannot look into the script to determine total volume (ie sample volume and air gap). This calculation is done at run and the error shows then.