Laser cutter

[Martin Allerton]

Hi there,

 

A project I may be starting would be made much easier with use of a laser cutter. I was wondering if it's possible for non members to use the one at the hackspace and what charges would be associated? Also, what sort of materials are suitable on it, along with size and thickness.

 

Thanks for any info,

 

Martin.

[Paul Brook]

> Hi there,
>
> A project I may be starting would be made much easier with use of a laser
> cutter. I was wondering if it's possible for non members to use the one at
> the hackspace and what charges would be associated?

Not directly, but if you ask nicely I expect you can find a qualified member
willing to do stuff on your behalf. Laser time is charged at £2 for
10 minutes (i.e. £12/hour), not including raw materials.

> Also, what sort of materials are suitable on it, along with size and
> thickness.

To a first approximation it cuts MDF, plywood and acrylic (Perspex) up to 8mm
thick. It does not cut metal or vinyl. Cutting area is approximately A4
(300x210mm).

Paul

[Martin Allerton]

Thanks for the speedy response. That's most helpful.

 

Rgds, Martin.

[Japoteg]

Paul, i thought it was up to 6mm thick.

[Paul Brook]

> Paul, i thought it was up to 6mm thick.

THe HPC laser website claims 8mm, though it's possible that in practice the
limit is 6mm. I don't think we've ever cut anything >3mm. Even then there's a
noticable taper.

Paul