K Response Text

[Maybell Hughs]

responsetext returns the content of the response, in unicode. Basically, it refers to Binary Response content. Python requests are generally used to fetch the content from a particular resource URI. Whenever we make a request to a specified URI through Python, it returns a response object. Now, this response object would be used to access certain features such as content, headers, etc. This article revolves around how to check the response.text out of a response object.

There are many libraries to make an HTTP request in Python, which are httplib, urllib, httplib2, treq, etc., but requests is the one of the best with cool features. If any attribute of requests shows NULL, check the status code using below attribute.

The text() method of the Response interface takes a Response stream and reads it to completion. It returns a promise that resolves with a String. The response is always decoded using UTF-8.

When getData() is run, we create a new request using the Request() constructor, then use it to fetch a specific .txt file. When the fetch is successful, we read a string out of the response using text(), then set the innerText of the element equal to the text object.

\n The text() method of the Response interface takes a Response stream and reads it to completion.\n It returns a promise that resolves with a String.\n The response is always decoded using UTF-8.\n

\n When getData() is run, we create a new request using the Request() constructor, then use it to fetch a specific .txt file.\n When the fetch is successful, we read a string out of the response using text(), then set the innerText of the element equal to the text object.\n

Yes, there are a couple of ways, though I keep getting conflicts with the script tags (which I now put in a code snippet) that loads the Jquery library that helps the client choose options via menus & sliders, that are related to the text field that forms the initial prompt box, which gets sent to openai via a submit button, and the javascript that functions the download button on the same page, along with other forms that do not work on other pages., like woo-commerce etc, as soon as disable the code snippet the other buttons work again.

So been trying to figure out a way to move the Jquery library elsewhere, or use another method.

You can clearly see that all is working fine. The system message works fine as well (debunking the community and discord misinformation that the system role does not work at the beginning, BTW. It works just fine if the session management code is written properly).

We can use the TikTok tokenizer to estimate token amount and add this to the running token count in the DB to prune the messages before sending them to the API and then update the DB with the new messages array. This is only one of many possible pruning strategies. Currently, I disabled that feature and enjoy pruning manually because that is how I develop full situational knowledge of what is going on with the new API method.

RECUWEB INC. recently released OpenAI Text Completion plugin for WordPress to simplify the AI integration process by allowing you to hold down the Shift key while selecting text from any input field or textarea.

I am facing an issue with Power Virtual Agents where I have a choice variable in my project, but the values are stored as choices, not as text. I need to convert the choice value to text for further processing, such as storing in a SharePoint list or passing to a Power Automate flow.

Not explicitly for the cloud flow integration (where Power Automate expects a string), but topic and global variables are documented here, Work with chatbot variables - Power Virtual Agents Microsoft Learn, @RobertMatthew1

Haven't found a more convenient way myself as of now. Because the bot I converted was relatively small I instead used set variable to create a new global variable i.e. there would be a TopLevel (option) - confined to the topic and a separately set Global.TopLevel (string) variable in your specific case. Feel clumsy admittedly, so hopefully someone has a better solution for it.

This didn't restore the functionality of the process though. When I run this topic in the PVA bot, the question that provides the TopLevel global variable triggers instead, and the bot resets to that stage of the process.

Hi,

You may have this figured out already but for anyone else wondering about this. One workable option is to use the set variable action and use the Formula Text(Variable name), i.e. create a new variable and set its value to the Choice value as a string.

Hi,

I am facing the same issue having converted a bot to the new PVA designed version. I have Multiple Choice Options and the variable of its output defaults to "choice" and I can't seem to change it.

Hello,

Thank you in advance for your help.

I'm trying to create a primarily open text response question (describe your gender) to which would be an open text response box, but also want radio / single multiple choice box to tick if participants 'do not want to answer.' I'm trying different combinations but can't seem to figure it out. I'm so rusty I'm pretty much brand new!

Thanks in advance,

Honor

Hi Honor ,

I think you need to use a Multiple Choice question and enable the "Allow text entry" option on the first choice to capture the open text response for gender. The second bubble choice could be "Prefer not to answer" with no text entry field attached.

I've shared a similar question I've used previously, below, for illustrative purposes. It's not set up the same way as you described your question, but it's kind of the same idea. In your example, the last option would be the first choice.

Is this new item you want to create part of the existing question, or a different question? If it's the former, I'm not sure how to do that in a Multiple Choice-Allow Text Entry item.

If this new item is an entirely separate question, then you may be able to set that type of restriction using Custom Validation with RegEx. I'm not familiar with RegEx, however, so I can't do much to help you with that.

Thank you TomG! I will give this a try!

Final question (for now I think ... I'm realising just how little I know with an introduction to JavaScript!). Is it possible to stop people from uploading a weblink / image in this situation (with the opex text response in this case)? We have resolved how to minimise the text length (thank you TomG) but our ethics team has concerns about people uploading malicious text/images!

Thank you so much for your support!

Honor :-)

_48229If by 'malicious text/images' you mean an injection attack through the text input field, Qualtrics already prevents that. You can also further limit what can be entered/saved using Text Entry Validation or JavaScript (input or blur event handlers or the Qualtrics addOnPageSubmit() function).

Thanks TomG! Yes, I think their concern was someone uploading an image (e.g. something identifiable) or even suggesting a weblink (e.g. a link to an adult site) - so I suppose not something specifically an injection attack, but something that would compromise the researcher in some way perhaps. I'm afraid I don't know what you mean by the JavaScript (it seems to be more complicated when trying to do the multiple choice question with an open text box (e.g. write in your gender - which we want to limit to 20 characters and stop anyone putting images / weblinks) and a second box (i dont want to answer). I'm so sorry I'm a bit useless, so your guidance is most welcome!

best wishes and many thanks,

Honor :-)

_48231You don't have to worry about images - those can't be added to a text input field. Most urls won't fit in 20 characters and I don't know why a researcher would actually use a url if it were entered.

It sounds like you might want something that censors offensive words. I have a function that does that - you can contact me by private message if you are interested in purchase.

You can also contact me by private message if you need custom JS (e.g., limit input to letters and spaces only).

Chances are that your application server responded with a plain-text error message - perhaps because you do not have enough permissions to use the CI. Check the app server logs, or (if you use plain HTTP) a network sniffer such as Wireshark.

It's important to note that Perspective Popups do not behave like Vision Popups. There is no "response" from the Popup. The script which opens your Popup opens the Popup correctly, but then IMMEDIATELY checks the status of a session property before a user could possibly interact with the Popup, so when you check session.custom.popup_response, you're going to obtain whatever value it had before the Popup was opened - not the value based off of the current user interaction.

Keep in mind this value is retained for the life of the session, so if a user visits this View again the session property will still have a value and so the Label will still display the last value supplied.

What I usually recommend when users use Popups is to familiarize yourself with system.perspective.sendMessage() (docs). Have the popup buttons invoke a sendMessage call, and have the main view listen with a Message Handler. You can then have the main view take no action based on the Popup until a user has actually performed an action within the Popup. This, in essence, causes the View to wait for a response - as opposed to your script.

Is there a 100% AUTOMATIC text-reply option? I'm going on a vacation and want to completely unplug. However, while gone, I want my phone (left at home) to auto-text a reply back to anyone who sends me text, so they know I'm on vacation and who to contact instead.

They'll work fine for sending a vacation reply for email. Unfortunately, they won't work for text messages, which is what the OP wanted, when they posted three years ago. I'm guessing they're back from vacation by now.

3a8082e126