THERM MODEL CAN'T CALCULATE

[stephanie tahary]

Hello, I also cannot calculate this model, could you please help me? 
I have already make it to be one polygon also i have delete some points but still cant run for calculation. There are no problem with the boundaries.

The THERM 7.8 apps always close by itself.
Please help me, thanks.

[Robin Mitchell]

Once again, a lot of simplification was needed -- too many points in curves, etc. 

Attached is a file that runs. I also rotated it 90 degrees left, so that the Exterior is on the left and the Interior is on the right. 

You will need to make your own boundary conditions, as I used the default NFRC Exterior BCs. 

Robin

--
You can view the THERM forum online at:
https://groups.google.com/g/LBNL-THERM
---
You received this message because you are subscribed to the Google Groups "THERM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to LBNL-THERM+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/LBNL-THERM/17a44a52-f3e8-44bc-857d-3c7a99a8c37an%40googlegroups.com.

--

Robin Mitchell

Building Technology and Urban Systems Division
Energy Technologies Area
Lawrence Berkeley National Laboratory

[Robin Mitchell]

Also, I simulated this in 7.8.80, which is the latest version of THERM on our website. 

Robin