Driver Canon Mg2570
Kelsi Corsi
I have a canon Pixma MG2500 series 2570 printer that is 3 years old, and I wanted to test if it would work before scrapping it.To day I installed the drivers from this Canon official websiteeverything worked fine(upto installation) but then I tried to scan something and then it displayed the following message:
Most Canon printers are designed to refuse to work without ink.The printer then enters into an error state and refuses to scan.The most common error code in this case is "2, 140, 21".You need in such a case to work around the printer's firmware.
Another known workaround was found for the Canon MP-198 printer andsimilar. It requires for the printer to have a digital display screen,and you may need to redo it every time that you turn on the printer.If this method doesn't work for the printer, then there is probablyno solution.
Try To Stop Printing ProcessYou will encounter 140, 21, Canon Printer Error Code 2 most likely when scanning the document over Canon printer. To solve this bug, you are required to give your system a simple command to stop printing the document. Just, follow the below-written instructions to quick fix the error code 2, 140, 21 from your Canon printer.