[Austin1800] Suspension Pump (looking for female schrader valve fitting)

[Loveday, Mike]

Hello All,

After sealing a small leak in my Mk2 RH suspension 'plumbing' (with a metal sleeve and screw clamps), I now need to build a suspension pump. I can do this from a spare master cylinder unit (salvaged from my Mk1). Mounting it on a board and setting up a lever should be straight forward but the trick seems to be finding the female Schrader valve fitting. Has anyone done something similar and any ideas as the where I might be able to order the fitting?

Thanks, Mike Loveday (located in Sydney, Mk1 and Mk2)

This e-mail has been scanned for viruses by the Cable&Wireless Worldwide e-mail security system. For more information on a proactive
managed e-mail secure service, visit http://www.cw.com/managed-exchange

The information contained in this e-mail is confidential and may also be subject to legal privilege. It is intended only for the recipient(s) named above.
If you are not named above as a recipient, you must not read, copy, disclose, forward or otherwise use the information contained in this email. If you
have received this e-mail in error, please notify the sender (whose contact details are above) immediately by reply e-mail and delete the message and any
attachments without retaining any copies.

Cable & Wireless Worldwide plc
Registered in England and Wales. Company Number 07029206
Registered office: Waterside House, Longshot Lane, Bracknell, Berkshire, RG12 1XL, England

[geoff.a...@gmail.com]

Hi
I recently bought one on Ebay. I think they are still available. I
Haven't tried it yet but it looks ok.
Here is the link

http://www.ebay.co.uk/itm/Hydragas-Hydrolastic-Suspension-LOW-LOSS-CONNECTOR-/170820833299?pt=LH_DefaultDomain_3&hash=item27c5b71013

Hope it helps

Geoff

On Apr 10, 11:58 am, "Loveday, Mike" <Mike.Love...@cw.com> wrote:
> Hello All,
>
> After sealing a small leak in my Mk2 RH suspension 'plumbing' (with a metal sleeve and screw clamps), I now need to build a suspension pump. I can do this from a spare master cylinder unit (salvaged from my Mk1). Mounting it on a board and setting up a lever should be straight forward but the trick seems to be finding the female Schrader valve fitting. Has anyone done something similar and any ideas as the where I might be able to order the fitting?
>
> Thanks, Mike Loveday (located in Sydney, Mk1 and Mk2)
>
> This e-mail has been scanned for viruses by the Cable&Wireless Worldwide e-mail security system. For more information on a proactive

> managed e-mail secure service, visithttp://www.cw.com/managed-exchange