digital signal generation without the labtool add-on board

[hadrien lepage]

Hi,

While having 2 labtools at home, I would like to use the labtool software and the LPC Link 2 alone (without the labtool add-on board) to generate a digital signal. Unfortunately, my tests have failed. Do you know why? Should I change something in the source code?  Is it related to the eeprom read procedure?

Many thanks,

Hadrien

[Anders Lindvall]

Hi Hadrien,

I would start by commenting out the SPI and I2C communication code. The problem is likely the communication with one of the (missing) I2C peripherals.

If it still doesn't work then you will have to describe the problem you are seeing in much more detail. What test fail? 

By the way, why do you want to run only on the Link 2?

Kind Regards,

Anders

--
You received this message because you are subscribed to the Google Groups "LabTool" group.
To unsubscribe from this group and stop receiving emails from it, send an email to labtool+u...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
___________________________________________________
Anders Lindvall, Senior Software Architect

Embedded Artists AB
Davidshallsgatan 16
SE-211 45 Malmo, SWEDEN

E-mail: Anders....@EmbeddedArtists.com
http://www.EmbeddedArtists.com
____________________________________________________
This communication is confidential and intended solely for the addressee(s).
Any unauthorized review, use, disclosure or distribution is prohibited. 
If you believe this message has been sent to you in error, please notify 
the sender by replying to this transmission and delete the message 
without disclosing it. Thank you.

E-mail including attachments is susceptible to data corruption,
interruption, unauthorized amendment, tampering and viruses, and we only
send and receive e-mails on the basis that we are not liable for any 
such corruption, interception, amendment, tampering or viruses or any
consequences thereof.