the labscript suite

Dear labscript suite users—current, and future. We have completed migrating the labscript suite

Could anyone please look into this?? On Monday, March 10, 2025 at 12:00:58 PM UTC+5:30 Puzzle wrote:

Hi, I am testing out Labscript for our lab as a possible replacement of current control system. An

Thanks all for the advice! Sorry for the delay in response. I will try that/keep this in mind if

Thanks Jakob. Hi Phil and Chris, Hope you're well! Wanted to bump this message again to get some

Apparently I should have checked the code before responding. This has been fixed on the current

Hello Everyone, Now that the holidays are solidly behind us, it is time for another informal office

Did you install via the developer version or the regular version? And when you did it, I assume you

Hi David, Sorry for the delayed reply. Here is my pip list C:\Users\schinelab\labscript-suite> .

Did you do the first compilation of the connection_table.h5 using the runmanager ? It is explained

Sort of. A dummy pseudoclock will allow the script to run without BLACS errors, but it won't

Hello everybody, I am currently implementing PID function on my blacs driver for a MOG Labs QRF. I

Hey Lincoln, hey Johannes, I´m sorry for disappearing from the conversation, I went on vacation the

Unfortunately, I don't think our DAQmx driver supports this kind of device (despite what the

JB, Thanks for reporting back the fix. It is a subtle distinction that the clock terminal

You shouldn't need to be building wheels from scratch, as we pre-build many of them. What

David, I looked directly at the repository and completely forgot about the documentation, now

Hi Alessandro, Thank you so much for this!! I am not familiar with Labrad, but would love to look at

Hi Dave, There are two remote concepts in BLACS. We'll assume for these examples that BLACS and

Hello everyone, there is currently a new solution to this problem which is to use novatech's

Dear Ian, Thank you! Indeed I was overthinking this. With the rest as is, redefining the function I

Dear Yoan, I know that what follows is not a “canonical” lyse use pattern, but unless you are

ok, thank you for the help and the resources. Best, Dave On Sunday, September 15, 2024 at 4:08:18 PM

Good morning Phil, thank you for the fast reply and the easy fix. Almost embarrassing for me not to

We are making progress! The NI_DAQmx devices will require a clockline to instantiate correctly (

You can submit shots to lyse using ZMQ. See how BLACS does it here: https://github.com/labscript-

There are a few layers of answer to this. 1) Completely independent, simultaneous installs: not

Hi Cody, Each instruction for the PrawnBlaster contains information on the frequency of the clock

That is a known issue with the zeromq == 4.3.5 package provided by conda. It should resolve if you

I suspect the 78xx cards work fine since most of the details of working with the cards is handled by

Hi David, Thanks for the suggestion! I'll give it a try. Best, Huan On Monday, July 8, 2024 at 9: