the labscript suite

Dear all, We are migrating from and old version of labscript to the current one as well as moving to

Dear labscript suite community, labscript 3.1.0 has been released! You may update to it by installing

Hi Ian, I think you're suggesting assymetric clocking should be supported in labscript rather

Hi Victor, Your solution sounds like a good one! We might consider implementing something like that

Hi Padia, No, you shouldn't have to configure anything additional in NI MAX or otherwise -

Hi Peter, Lyse is really only designed to work with matplotlib, but the matplotlib plots are launched

Dear Philip, Actually we also bought the Raspberry Pi board at the same time for testing and it is

Hi Lars, sorry for my very late response. Thank you very much for your alternative solution! I have

Thanks for information. I hope now a new mail address should be used which works better. Lars Philip

Hi Matt, Sorry for such a slow response. For some reason this post slipped through the listserve

Hi all, I've also made some code to talk to the AD9959 via an arduino here if anyone is

Hi Nick, We never benchmarked the latencies. It was moving a lens on a translation stage so it was

Hi Eric, Despite both being made by the Raspberry Pi Foundation, the Pico is a completely different

Hi All, Apologies I haven't been able to engage with this discussion again sooner. I don't

I will most certainly do that and report back any issues that arise. On Monday, May 24, 2021 at 2:38:

Hi Rohit, 1. At the moment the runmanager remote API doesn't support adding new globals. Although

Hi Zak, thanks for the detailed explanation. I wasn't aware of the solutions already found. I

Hi Eric, David, Glad you got the issue worked out! I believe this is the same issue mentioned in the

Hi Zak, Thanks! Resetting the computer did the trick. On Wednesday, April 21, 2021 at 1:25:40 PM UTC-

Hmm, we're getting into the regime of stuff that I'm not so familiar with, so maybe Chris or

Yes, this is still an intermittent problem. This occurrence of the Pulseblaster, NI devices, etc

one correction: in the folder ~/labscript-suite/userlib/labscriptlib/example_apparatus there are

Madi, I have done this a few times now and it actually isn't too bad. A parallel installation is

Hi all, Maybe this metadata should be stored in the shot_properties HDF5 group then...is that not

yeah the issue I was having is related to the fact that my devices example code creates a class that

Hello, I dug through the repository history and found this: https://github.com/labscript-suite/

Thanks Phil that fix worked! On Tuesday, January 12, 2021 at 4:01:56 PM UTC-8 Philip Starkey wrote:

Hi Zak, the ' routine_storage' being accessible from one script only is totaly fine to me and

Hi all, Thanks for the comments and suggestions. Maybe I should mention the following : 1. We are not

Hi David, Philip, Thanks for the replies! They've been very useful. The goal of switching some of