Groups

Embinux Labs

1–30 of 177

0 selected

archan.paul, Ulises Vega2

3/24/10

comparison between Oxdroid and Embinux Android ports

ps: Recently labs.embinux.org/git went offline as we migrated to better server and bandwidth to

unread,

comparison between Oxdroid and Embinux Android ports

ps: Recently labs.embinux.org/git went offline as we migrated to better server and bandwidth to

3/24/10

2/28/10

I can't download Android build

I am seeing the exact same problem I am in the United States On Feb 19, 6:58 am, kou <gaohongbo1..

unread,

I can't download Android build

I am seeing the exact same problem I am in the United States On Feb 19, 6:58 am, kou <gaohongbo1..

2/28/10

3/1/10

hello all i need cpufreq drivers to work in embinux android kernel. the same is working fine with

unread,

hello all i need cpufreq drivers to work in embinux android kernel. the same is working fine with

3/1/10

shivap, … shivdas.gujare9

2/25/10

booting embinux android without mmc

hi the error u mentioned was occuring when i was using angstrom rootfs with kevin's omap pm

unread,

booting embinux android without mmc

hi the error u mentioned was occuring when i was using angstrom rootfs with kevin's omap pm

2/25/10

2/25/10

Re: [Osd 55] Android not comming up on Hawkboard

Lakhsmikanth, Did you setup the nfs correctly? From the error log I understand you are getting the

unread,

Re: [Osd 55] Android not comming up on Hawkboard

Lakhsmikanth, Did you setup the nfs correctly? From the error log I understand you are getting the

2/25/10

2/17/10

Re: [Fwd: Re: [Osd 46] Embinux android binary porting problem]

Jooil, Everything is fine May be your mmc card giving the problem Try the uImage and rootfs by

unread,

Re: [Fwd: Re: [Osd 46] Embinux android binary porting problem]

Jooil, Everything is fine May be your mmc card giving the problem Try the uImage and rootfs by

2/17/10

2/17/10

Re: [Osd 46] Embinux android binary porting problem

Jooil, Thanks for your interest on Embinux. After studying your error-log, I need to clarify some

unread,

Re: [Osd 46] Embinux android binary porting problem

Jooil, Thanks for your interest on Embinux. After studying your error-log, I need to clarify some

2/17/10

aaronsher, shivdas.gujare4

2/11/10

USB Host on Android for Beagle Board?

On Wed, 10 Feb 2010 12:21:04 -0800 (PST), aaronsher <as...@vanteon.com> wrote: > Sorry, that

unread,

USB Host on Android for Beagle Board?

On Wed, 10 Feb 2010 12:21:04 -0800 (PST), aaronsher <as...@vanteon.com> wrote: > Sorry, that

2/11/10

shivap, venkat.raju5

2/9/10

yes i did. i enabled both cpufreq and power management options from menuconfig. the same thing is

unread,

yes i did. i enabled both cpufreq and power management options from menuconfig. the same thing is

2/9/10

Nilly, amarnath3

2/8/10

videoplayer.apk is crashing

Hi Amarnath, I am doing stop media and than I am starting the videoplayer but still it is crashing(

unread,

videoplayer.apk is crashing

Hi Amarnath, I am doing stop media and than I am starting the videoplayer but still it is crashing(

2/8/10

2/8/10

how can I calculate u-boot video mode t848x480

Dear All, I want to make u-boot resolution 848x480. How can I calculate resolution parameter like

unread,

how can I calculate u-boot video mode t848x480

Dear All, I want to make u-boot resolution 848x480. How can I calculate resolution parameter like

2/8/10

2/8/10

Fwd: Re: [labs-embinux:489] cpufreq

FYI Thanks&Regards, Venkat Raju. -------- Original Message -------- Subject: Re: [labs-embinux:

unread,

Fwd: Re: [labs-embinux:489] cpufreq

FYI Thanks&Regards, Venkat Raju. -------- Original Message -------- Subject: Re: [labs-embinux:

2/8/10

solcer, Vladimir Pantelic2

2/5/10

Please help. I killed my beagleboard :(

solcer wrote: > I killed my beagleboard. I was trying loading xboot. My last command > is: nand

unread,

Please help. I killed my beagleboard :(

solcer wrote: > I killed my beagleboard. I was trying loading xboot. My last command > is: nand

2/5/10

Apoorv, amarnath2

2/5/10

S-Video on OMAP3EVM

Apoorv, Upto now we didn't try s-video on omap3 platform. Let you try it and tell me -:) Thanks

unread,

S-Video on OMAP3EVM

Apoorv, Upto now we didn't try s-video on omap3 platform. Let you try it and tell me -:) Thanks

2/5/10

solcer, amarnath2

2/5/10

How can I change x-loader resolution?

solcer, U can change this dvimode by using the following setenv command setenv dvimode 848x480@60

unread,

How can I change x-loader resolution?

solcer, U can change this dvimode by using the following setenv command setenv dvimode 848x480@60

2/5/10

Nilly, amarnath4

2/3/10

Network-wifi remove from RFS.

HI Amarnath, But this will disable the network. I want to remove it from RFS. I dont want to built it

unread,

Network-wifi remove from RFS.

HI Amarnath, But this will disable the network. I want to remove it from RFS. I dont want to built it

2/3/10

2/2/10

videoplayer.apk from command prompt

I found it.If any one wants. its am start -a android.intent.action.MAIN -n com.appdroid.videoplayer/

unread,

videoplayer.apk from command prompt

I found it.If any one wants. its am start -a android.intent.action.MAIN -n com.appdroid.videoplayer/

2/2/10

2/1/10

"Failed to load wifi driver" from application

I think default wifi driver is enabled in the kernel but no hardware available for that so, whenever

unread,

"Failed to load wifi driver" from application

I think default wifi driver is enabled in the kernel but no hardware available for that so, whenever

2/1/10

1/29/10

Support for USB camera?

Hi All, Is there any support for USB camera in this project? Thanks,

unread,

Support for USB camera?

Hi All, Is there any support for USB camera in this project? Thanks,

1/29/10

1/28/10

Beagleboard and pico projector resolution problem...

Dear All, I began newly work with beagleboard and linux. I would like help from you. I ported Android

unread,

Beagleboard and pico projector resolution problem...

Dear All, I began newly work with beagleboard and linux. I would like help from you. I ported Android

1/28/10

1/27/10

I built it!, but no tests yet...

...now, I have also a Gumstix Overo Air with Palo43 board, how far should be this built (that's

unread,

I built it!, but no tests yet...

...now, I have also a Gumstix Overo Air with Palo43 board, how far should be this built (that's

1/27/10

1/25/10

[Fwd: Re: [labs-embinux:466] [Fwd: [Osd 20] Build of Android Donut version for the Beagle board]]

FYI -- Thanks & Regards, Amarnath Alamuri Associate Embedded Software Engineer, Embedded and

unread,

[Fwd: Re: [labs-embinux:466] [Fwd: [Osd 20] Build of Android Donut version for the Beagle board]]

FYI -- Thanks & Regards, Amarnath Alamuri Associate Embedded Software Engineer, Embedded and

1/25/10

Partha, amarnath2

1/25/10

[Fwd: [Osd 20] Build of Android Donut version for the Beagle board]

Royer, I have some queries : 1)Which toolchain you are using ? The following toolchain wiki page is

unread,

[Fwd: [Osd 20] Build of Android Donut version for the Beagle board]

Royer, I have some queries : 1)Which toolchain you are using ? The following toolchain wiki page is

1/25/10

SaiKiran, … Partha12

1/25/10

Audio playback issue on Eclair version

Sai, One information , the audio is coming with opencore , and the video ( inversion) problem

unread,

Audio playback issue on Eclair version

Sai, One information , the audio is coming with opencore , and the video ( inversion) problem

1/25/10

vin, … Kaushik(ICMAN)3

1/22/10

running an executable on android/beagle

I guess what you need is the Android.mk file. which will tell how to compile your test file and what

unread,

running an executable on android/beagle

I guess what you need is the Android.mk file. which will tell how to compile your test file and what

1/22/10

1/22/10

Re: Working on ethernet instead of Wifi in Android

Padma, Have you tried the following steps : You need ethernet to USB converter. ( Connect eth0

unread,

Re: Working on ethernet instead of Wifi in Android

Padma, Have you tried the following steps : You need ethernet to USB converter. ( Connect eth0

1/22/10

1/19/10

Still unable to download anything...

repo init -u git://labs.embinux.org/embinux-android-build/android-omap3/repo/android/platform/

unread,

Still unable to download anything...

repo init -u git://labs.embinux.org/embinux-android-build/android-omap3/repo/android/platform/

1/19/10

sai kiran, Partha2

1/19/10

Re: [labs-embinux:0] Digest for labs-embinux@googlegroups.com - 6 Messages in 5 Topics

Guys, I really apologies for this, as we have some serious issues related to our server , we are

unread,

Re: [labs-embinux:0] Digest for labs-embinux@googlegroups.com - 6 Messages in 5 Topics

Guys, I really apologies for this, as we have some serious issues related to our server , we are

1/19/10

Fernando Martines

1/18/10

Omap3evm + Android donut + camera support

Hello, I am trying to get Android donut running on Omap3evm with camera support. Does Embinux provide

unread,

Omap3evm + Android donut + camera support

Hello, I am trying to get Android donut running on Omap3evm with camera support. Does Embinux provide

1/18/10

Fernando Martines, … hg4

1/18/10

GIT Repository error for Android Omap3 EVM (connection reset by peer)

On Jan 18, 11:50 am, Partha <partha.acha...@embinux.com> wrote: > Guys, > > It is

unread,

GIT Repository error for Android Omap3 EVM (connection reset by peer)

On Jan 18, 11:50 am, Partha <partha.acha...@embinux.com> wrote: > Guys, > > It is

1/18/10

Search

Clear search

Close search

Google apps

Main menu