Orico Clone Duplicator Software Download
Linn Lievsay
Press and hold the clone button, then press the power switch to turn on the power (at this time, keep pressing the START button and not let go), waiting for 10-15 seconds, the blue lights are all on. Still keep holding the clone button for 5 seconds and let go, the clone will begin. The indicator light will show the copy progress (25% -50% -75% -100%). When the clone is completed, the 4 LED lights will always be on.
I disagree, I am glad I am not the only one that sees the violet light on the HDD indicator. Now I've been told the same, red (or what I call violet) means the drive is not read properly, well guess what, the red (or what I call violet) is the ONLY mode that worked... I have tried duplicating about 10 drives... all but 2 failed, both the worked were violet in color. I contacted support and I was told that because of some drives having a restricted partition, the duplicator could not write over it. I was asked to do a Low Level format on the drive. I did, spent 5 hours doing a low level format on two different drives to no avail, still one drive is blue and the other is violet. When they mismatch, THEY WILL NOT DUPLICATE.
760c119bf3