Wooden plate for the hotend.

3 views

Skip to first unread message

Daniel Porter

unread,

Mar 30, 2013, 9:47:25 PM3/30/13

to kyin3dp...@googlegroups.com

Here is an Adobe Illustrator file for the wooden plates that mount our hotends (Prusa). There are 3 different types I made including the default one. I cut mine out of 1/4" poplar wood from lowes then milled the mid section down to 0.185" which is the neck thickness for the hot end. It is way stronger than the plywood that the default ones are made out of.

Daniel