Serial connection speed

[Piotr K]

Hi.

Is there already a version of the GUI with a way to change the serial port speed? I'm using the speed of 57600 because of some limitations of my LRS telemetry downlink.

Many thx

Piotr

[KataVentos]

Hi,

 you can change baud on config.h using latest developments, as for the GUI we can add it in future, no problem.

Cheers,

-KV

[Piotr K]

Hi.

I know how to change the baud rate in arduino code. I will wait if you add the selection of baudrate in the GUI, it would be a good feature.

I have noticed one small maybe a bug. As i am using only the sensors from multiwii i disabled the hardware ADC. I enabled the RSSI, Main voltage and Current read from multiwii. On the OSD the current was shown 0.0A but the consumption of mAh was shown properly. As i turn the ADC again on the current readout started to work. Maybe it is a small bug.

[KataVentos]

OK. 

Thanks, I will look into it! I am only using Hardware sensor direct to OSD at this time, I miss that.

So I don´t forget to fix it before release 2.3dev, please report this issue with same text on the issues section.

Cheers,

-KV

[Oden]

Hi Piotr,

Out of interest what LRS are you using that limits the speed to 57600?

[Piotr K]

Hi.

I am unsing the "eLeReS" system which is basen on openlrs. The firmware is here http://rc-fpv.pl/viewtopic.php?t=5202 wiki here http://www.eleres.net/wiki/index.php?title=English_version

It can read GPS and multiwii communication limted to 57600. It passes data throu to the transmitter giving telemetry with this display:

http://rc-fpv.pl/viewtopic.php?t=7733

The good thing, the display stores last >500 gps positions of the model and gives online data as you see in the pictures on the topic. Good for the case of recovery. The eLeReS system also featurering an antenna tracker and some lost model search functions even with sending a repeater in the air.