Tutorial

[RUBEN HANSEN]

Hi

Now that my MinimOSD is working, I would also like to have it working together with my MultiWii, but cannot find any information about
the setting in the MW software. The problem is that I have tried to connect the OSD to all Serial Ports on the MW except Port 2, but is
not getting any information out into the OSD. So I am looking for a tutorial about the MW settings, changes to the Config.h or what ever is
needed. I can find great tutorial about setting up the OSD, but what about the MW? I do have the version 2.2 running, and all ports are
set to 115600 baud.

Hope you can help on this

Ruben

[KataVentos]

Hi,

   it should work out of the box on every MWii port.

Remember to check the tutorial/Wiki it is very important to connect it right, for example serial RX on FC to TX on OSD and vice versa, you can not follow the APM wiki/connections for this.

Check here: http://code.google.com/p/rush-osd-development/wiki/MinimOSD_Basic_Setup

-KV

[subaru4WD]

You will want to connect the OSD TX/RX to whichever pins your multiWii board uses for Telemetry output.  It depends on what flight control board you are using.

There is nothing in config.h to worry about.