Groups

snickerdoodle forum

Contact owners and managers

1–10 of 268

Hello and welcome to the official snickerdoodle forum - your one-stop-shop for questions, comments, suggestions, and all things snickerdoodle!

0 selected

Cameron McQuinn, Bush2

1/7/18

Unable to program FPGA from Linux

The fact that you are able to load the bitstream using U-Boot and JTAG points to an issue with the

unread,

Unable to program FPGA from Linux

The fact that you are able to load the bitstream using U-Boot and JTAG points to an issue with the

1/7/18

Keith R. Brafford, … an...@teknikportfoljen.se7

12/4/17

OpenAMP on Snickerdoodle

It was just a suggestion using a Kanban board. But in principle it could be as simple as just three

unread,

OpenAMP on Snickerdoodle

It was just a suggestion using a Kanban board. But in principle it could be as simple as just three

12/4/17

igra...@gmail.com

4/1/18

how to connect snickerdoodle via bluetooth to phone

Hello! I want to connect my snicketdoodle black via bluetooth to my android smartphone Can you give

unread,

how to connect snickerdoodle via bluetooth to phone

Hello! I want to connect my snicketdoodle black via bluetooth to my android smartphone Can you give

4/1/18

firel...@gmail.com

1/31/18

SD Card I/O errors

While attempting to install VIM, my snickerdoodle lost its mind. The root FS was remounted (?) read-

unread,

SD Card I/O errors

While attempting to install VIM, my snickerdoodle lost its mind. The root FS was remounted (?) read-

1/31/18

David M, … Rob Barris7

1/30/18

Booting with sysboot

I had been debugging sysboot and fixing up the blog when I found that the '/boot' folder is

unread,

Booting with sysboot

I had been debugging sysboot and fixing up the blog when I found that the '/boot' folder is

1/30/18

1/2/18

Is it possible to use 'exported hardware' and udev to dynamically load kernel drivers to control FPGA cores?

I'm not sure exactly what you're describing but there is not a way to directly parse and load

unread,

Is it possible to use 'exported hardware' and udev to dynamically load kernel drivers to control FPGA cores?

I'm not sure exactly what you're describing but there is not a way to directly parse and load

1/2/18

drbc...@gmail.com, Bush2

7/24/17

Serial console: User snickerdoodle cannot sudo

What is the process you're following for creating you're user and allowing permissions? Can

unread,

Serial console: User snickerdoodle cannot sudo

What is the process you're following for creating you're user and allowing permissions? Can

7/24/17

hedg...@gmail.com, pat...@gmail.com3

7/15/17

Tutorial: Debugging Snickerdoodle from GDB without using Eclipse!

Exactly same feeling here about Eclipse (and I think we're far from the only ones). From this

unread,

Tutorial: Debugging Snickerdoodle from GDB without using Eclipse!

Exactly same feeling here about Eclipse (and I think we're far from the only ones). From this

7/15/17

drbc...@gmail.com, Cousins4

7/22/17

Linux boot issue: black, xenial

(1) Successfully booted snickerdoodle_black_xenial_kinetic.img after reinstalling the boot and root

unread,

Linux boot issue: black, xenial

(1) Successfully booted snickerdoodle_black_xenial_kinetic.img after reinstalling the boot and root

7/22/17

Cameron McQuinn, … am...@automatasystems.com16

11/1/17

MachineKit on Snickerdoodle?

hi, I got the mksoc fpga project for Zturn to build on Vivado 2017.2. I have also ported the project

unread,

MachineKit on Snickerdoodle?

hi, I got the mksoc fpga project for Zturn to build on Vivado 2017.2. I have also ported the project

11/1/17

4/1/17

Re: Ubuntu 16.04 LTS default login details

Can you show a screenshot of the failure? After successfully entering the username/password

unread,

Re: Ubuntu 16.04 LTS default login details

Can you show a screenshot of the failure? After successfully entering the username/password

4/1/17

8/20/16

Wireless Access Point

I've updated the scripts required to get the wireless access point mode working at https://github

unread,

Wireless Access Point

I've updated the scripts required to get the wireless access point mode working at https://github

8/20/16

Search

Clear search

Close search

Google apps

Main menu