Official Leagoo M9 (MediaTek MT6580) Stock Rom
Floro Turpin
Official Leagoo M9 (MediaTek MT6580) Stock Rom
The Leagoo M9 is a budget smartphone that runs on Android 7.0 Nougat and is powered by a MediaTek MT6580 quad-core processor. The phone has a 5.5-inch IPS display with a resolution of 1280 x 640 pixels and an 18:9 aspect ratio. The phone also features a dual rear camera setup with an 8MP main sensor and a 2MP secondary sensor, as well as a dual front camera setup with a 5MP main sensor and a 2MP secondary sensor. The phone has 2GB of RAM and 16GB of internal storage, which can be expanded up to 32GB via a microSD card. The phone has a 2850mAh battery and supports dual SIM cards, Wi-Fi, Bluetooth, GPS, and 3G networks.
If you own a Leagoo M9 smartphone and want to install the official stock firmware on it, you can follow this guide. Installing the official stock firmware can help you to unbrick your device, fix bootloop issues, restore the original system settings, or update your device to the latest software version. Before you proceed, make sure to backup your important data, charge your device to at least 50%, and download the required tools and files from the links below.
Requirements
- A Windows PC and a USB cable.
- SP Flash Tool , which is a software that can flash firmware files on MediaTek devices.
- VCOM Driver , which is a driver that allows your PC to communicate with your device.
- Official Leagoo M9 stock firmware , which is a zip file that contains the system image and the scatter file.
Steps to Install Official Firmware on Leagoo M9
- Extract the SP Flash Tool zip file and run the flash_tool.exe file as administrator.
- Click on the Download tab and click on the Choose button next to the Scatter-loading File option.
- Navigate to the folder where you extracted the stock firmware zip file and select the MT6580_Android_scatter.txt file.
- Make sure that all the partitions are checked and click on the Download button.
- Turn off your device and remove the battery if possible.
- Connect your device to your PC via USB cable while holding the Volume Down button.
- The SP Flash Tool will detect your device and start flashing the firmware files.
- Wait for the process to complete and you will see a green tick mark on the screen.
- Disconnect your device and reboot it.
Congratulations, you have successfully installed the official stock firmware on your Leagoo M9 smartphone. You can now enjoy the original system performance and features of your device. If you have any questions or issues, feel free to leave a comment below.
6500f7198a