T300 Firmware

[Brittany Bhadd]

Ihave the same problem. Zwift Android does not control the resistance over bluetooth. It works with other apps like the Magene Utility, which lets you test according to gradient or erg mode at a set power.

I had this same problem previously with another model of smart trainer, which was fixed after the maker updated the firmware on the trainer. I do hope this is a problem with the firmware on the trainer which will be fixed in the same way, but until that happens, ant+ for now.

So what is the solution? Still not working for me. My configuration is Zwift on Android 10. ant+ works fine for T300 as power meter and cadence, but controllable just cannot find the T300 both over bluetooth or ant+. Using latest trainer firmware (something like v0.1.0.6)

Hola a todos, yo compr un T300, finalmente me funcion controlable cuando descarge Magene utility, me inscrib, nombre, usuario y luego recib un correo con un cdigo de activacin, recin ah pude entrenar con ZWIFT. Pero necesito ayuda, no me toma la cadencia y tengo ANT+ Y BLuetooth. Qu ocurrir?

Just had one of those just now. Updated my TX to V48 and all seemed ok until I fired up GSC demo for a test drive but the wheel went dead..no lights, nada. Replugged USB as well as different ports, same with power cord, pressed every button I could find until finally giving up and restarted the PC - still 'no bueno'. Luckily, I still kept the previous driver file and had it delete the previous one and had that reloaded. Went back into TX firmware update and was able to get V47 back as well as the wheel...'whew'! Thought I'd try V48 again...'why? - cause I like updates'. So I re-installed the new driver once again and cautiously updated firmware to V48 and then restarted PC. Checked my calibrations after log on and all was fine, I fired up GSC demo again and everything played fine. I just shut everything down tonight, I'll see how everything works come tomorrow.

Sorry to dig up an old thread but can you please explain this? Are the TM TX and T300RS wheels currently not capable of outputting any sort of vibration FFB? If so, this sounds like a pretty big issue...

It is capable but I think it has something to do with Thrustmaster's profile 'damper' settings. I like a heavy wheel and maxing 'damper' provides that but tends to loose feeling on most vibrations as I saw it. I race with Game Stock Car Extreme and found a way through it's internal file FFB settings to magnify curb, road and engine vibes plus enhanced relative grip while still pushing for a heavy wheel. Worked extremely well from my perspective.

Since 2007, Inside Sim Racing has been the number one show dedicated to the world of simulated motorsports. Every episode, we will bring you stories from a variety of genres in the world of Simulated Racing.

I have a T300 RTU running firmware version 2.8.4 which is talking to a PM8240 meter using Modbus over an RS485 link. The RTU has been configured using Easergy Builder V1.7.9 with the following Modbus master parameters for the meter device:

What I am finding (by examining the Modbus channel trace display in the web server) is that occasionally one of the Modbus replies from the meter has the top bit of the function code byte set to indicate an error and contains an exception code of 2.

After looking at the exported Modbus channel trace (file attached) again it seems to me that at least 2 reties are taking place before the response containing the exception code is received but there is nothing in the trace to suggest why the retries are occurring.

It's not a firmware issue (while mine is the latest, v34), it's a game issue. Alt-tabbing out basically causes the game to forget FFB exists on my T300 RS GT. Restarting my PC and just not alt-tabbing out is the only fix for it, which isn't going to be easy when having to deal with Discord for league things. How this managed to get past the Beta is beyond me, I had this similar issue when doing the playtest.

The fix at the time was to just open the Thrustmaster Control Panel, trigger a FFB test, and then go back into the game, issue was solved. Whatever happened between the Beta and now has completely erased that. Very disappointing for a game at this price.

Game version is 1.0.1012607. Which is really weird considering I remember seeing patch notes for like, 1.07 or whatever. So that's fantastic.

Good evening, I have the following problem. Good evening, I have the following problem. Almost every time I drive out of the pits or want to start a race, I lose my FFB. Almost every time I drive out of the pits or want to start a race, I lose my FFB. Every time I am forced to pull out the USB plug and plug it back in until it finally works again. Every time I am forced to pull out the USB plug and plug it back in until it finally works again. Until then, it usually takes a whole lap of the race and the AI lets almost everyone pass. Is there already a fix or is there something in the pipeline? So you don't need to drive qualifying if you have to leave the start to the ai anyway because theSo you don't need to drive qualifying if you have to leave the start to the ai anyway because the FFB doesn't work.must be left to the AI.

and the problem is still there... i rly think that this is not going to get fixed. The same as TLCM pedals. When you connect the TLCM pedals directly via USB to the PC and, in my case the t300 also with usb directly to PC then the wheel wont get detected by the game.. that problem is there sicne F1 22.

Product: F1 23

Platform:Xbox Series X

Please specify your platform model. Microsoft Xbox Series X

Summarize your bug I have no force feedback. My wheel is a Thrustmaster TX Racing Wheel (Ferrari 458 italia Edition). Works fine with F1 22 and all of my other racing games. Any thoughts would be much appreciated!

What is your 16 digit Report Code?

Can you please provide the name of your current internet service provider?

Which area is the bug/glitch in? Single Player

Steps: How can we find the bug ourselves? Try using the same wheel

What happens when the bug occurs? No force feedback. Everything else works fine

What do you expect to see? I'd like to have it fixed please!

Tried also downgrading the firmware with the one bundled in 2015 win xp driver. Now upon restart, it is detected, but the wheel constantly rotates and vibrates. So I guess I will need to upgrade firmware back.

I also remember there was some pedals firmware update one year ago. Perhaps that was the issue. For debugging purposes, you might try to disconnect the pedals and try just the wheel in WinXP. There was some PDF about pedals firmware update. I guess it is possible to downgrade that behavior as well. But currently, it works on 2013 driver in WinXP, including this new firmware.

The steps below assume the AP is plugged directly into your computer.

If your AP is plugged into a switch and is picking up an IP address via DHCP then you will have to substitute its assigned IP address anywhere the text 192.168.0.1 appears below.

If you don't see a BusyBox shell prompt, and instead see just the xclaim : prompt then the injection hasn't worked.

Repeat the command injection step, ensuring you type ";/bin/sh;" including the quotes.

Your browser will show a security warning. This is normal and you should choose Advanced and then click through to the website by pressing Accept the Risk and Continue or Continue to 192.168.0.1 (unsafe) (the exact wording will vary depending on your browser).

Navigate to Maintenance > Upgrade.

Choose Upgrade Method: Local and press the Local File Name: Browse... button and select your Ruckus T300 Unleashed 200.7 firmware file.

Choose Perform Upgrade.

3a8082e126