Skip to first unread message
viljmak52
Sep 30, 2014, 5:59:10 AM9/30/14
to kisslicer-r...@googlegroups.com
Sometimes pillar diameter is about 10mm and sometimes about 20mm (KISS 1.4.6.10). Couldn't find a way how to set the size. Is is possible set it somehow?
I'd like diameter to be always little more than distance (16mm) between nozzles, pillar would then sweep not used nozzle tip clean too.
PenskeGuy
Sep 30, 2014, 5:31:06 PM9/30/14
to kisslicer-r...@googlegroups.com
No. Size and location has been requested for some time.
Isaac Thompson
Oct 1, 2014, 6:49:35 PM10/1/14
to
i think pillar diameter is now related to brim diameter. there isn't a separate box for it but it can be changed (version 1.4.6.9)
*edit*
it's actually the inflate raft/prime gap setting that sets pillar diameter. you can space the pillar from the model using brim diameter (and if you don't want the brim, i assume you can set brim height zero)
that just leaves angle from the model, which i don't know how to affect
PenskeGuy
Oct 2, 2014, 5:01:45 AM10/2/14
to kisslicer-r...@googlegroups.com
You're right that Inflate Raft/Prime Gap now changes Pillar diameter. What's the point of that? They should be separately adjustable.
Reply all
Reply to author
Forward
0 new messages