Brim Bug - No support on first layer if brim Dia. is larger than 1.3 mm

42 views

Skip to first unread message

unread,

Jun 22, 2014, 2:41:10 PM6/22/14

to kisslicer-r...@googlegroups.com

Using 1.4.4.1 but probably was present before.

Setting a brim diameter of 1.4 mm or larger prevents the support from being created on the first layer.

Checked on two of my models.

Brim 1.3.jpg

Brim 1.4.jpg

Reply all

Reply to author

Forward

0 new messages