Thank you Jonathan,
My machine's spec are:
Windows 7 Professional 64-bit SP1
Intel Core i5 4430 @ 3.00GHz
8.00GB Dual-Channel DDR3 @ 800MHz (9-9-9-24)
Windows 7 Professional 64-bit SP1
I hope I can get time to test your build today. Do I just install it without un-installing the current version? They can exist on the machine at the same time?
Best regards,
Garry
They can co-exist in the same place...just rename one of them. (And you probably only want to run one at a time, so they don't fight over the INI files and such.)
I have printed 4-5 objects and had no problems with the USB connection. I will report later if the same issue occurs in the future but I'm thinking the problem is solved. Thank you for helping me Jonathan.
I am really liking KISSlicer. My machine prints so smooooooooth printing parts sliced with it. The only thing stopping me from using KISSlicer for most of my work is the inability to set top and bottom layer thickness independent of each other and independent of the side wall thickness. I really hope to see this one day. But even without that this is one sweet slicer.
Best regards,
Garry